journal article·2022-01

High-temperature phase characterization of AlCrFeNiTi compositionally complex alloys

Marius Reiberg, Chuyi Duan, Xiaohu Li, Ewald Werner

Publisher page

Abstract

Abstract In this work, alloys composed of the 5 base-elements Al, Cr, Fe, Ni and Ti and elements in minor amounts were produced by arc melting and powder metallurgy. The alloys’ phase distribution was analyzed via high energy X-ray diffraction (HEXRD), neutron diffraction and electron backscatter diffraction (EBSD). The two studied compositions have low concentrations of the elements Al and Ti, medium concentrations of the elements Cr and Fe and high amounts of Ni (chemical composition in at.-%: Al10Cr20Fe20Ni40Ti5, Al10Cr20Fe20Ni35Ti10). The goal then was to analyze the microstructure of these compositions at elevated temperatures in dependence of their chemical composition and the production method. Analysis of both compositions show the presence of B2-phases, L12-phases, Full Heusler-phases (H_L21), C14_Laves-phase and σ-phase. The combination of dilatometric tests with microstructure analysis via HEXRD and neutron diffraction gives the possibility of observing changes in phase amounts in dependence of temperature. A quantification of phase amounts in the compositions is supported by thermodynamic calculations of stable phases, applying the calculation-of-phase-diagrams (CALPHAD) method within the software Thermocalc. Due to its detrimental influence on ductility the existence of σ-phase is undesired in nickel-chromium-iron alloys and hence σ-phase precipitation with an associated dissolution of the phases B2 and L12 at elevated temperatures was studied in detail.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Entropy Alloys Studies · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. A critical review of high entropy alloys and related concepts10.1016/j.actamat.2016.08.081 ↗
2. High-pressure high-temperature tailoring of High Entropy Alloys for extreme environments10.1016/j.jallcom.2017.12.216 ↗
3. Murty · 2014
4. Design of non-equiatomic medium-entropy alloys10.1038/s41598-018-19449-0 ↗
5. Study of materials produced by powder metallurgy using classical and modern additive laser technology10.1016/j.proeng.2015.01.488 ↗
6. Böhler Edelstahl GMBH & Co KG · 2009
7. Special Materials Corporation, Inconel Alloy 718: Datasheet SMC-045.
8. Gamma-gamma prime-gamma double prime dual-superlattice superalloys10.1016/j.scriptamat.2017.04.029 ↗
9. Reed · 2006
10. Micromechanical behaviour of Ni-based superalloys close to the yield point: a comparative study between neutron diffraction on different polycrystalline microstructures and crystal plasticity finite element modelling10.1007/s00161-018-0720-0 ↗
11. Wear and oxidation resistances of AlCrFeNiTi-based high entropy alloys10.1016/j.intermet.2018.07.017 ↗
12. AlCoCrFeNiTi and its equal-molar five-component alloys in a metal mixological enthalpy-entropy plane
13. Microstructures and mechanical properties of AlXCrFeNiTi0.25 alloys10.1016/j.jallcom.2014.09.073 ↗
14. The space group of the σ-FeCr crystal structure10.1063/1.1748278 ↗
15. The determination of the crystal structure of the σ-phase in the iron–chromium and iron–molybdenum systems10.1107/S0365110X54002605 ↗
16. Sigma-phase in Fe-Cr and Fe-V alloy systems and its physical properties10.1080/10408436.2011.589232 ↗
17. Berns · 2008
18. Direct observations of sigma phase formation in duplex stainless steels using in-situ synchrotron X-ray diffraction10.1007/s11661-006-9076-3 ↗
19. DAMASK – the Düsseldorf Advanced Material Simulation Kit for modeling multi-physics crystal plasticity, thermal, and damage phenomena from the single crystal up to the component scale10.1016/j.commatsci.2018.04.030 ↗
20. Characterization of powder metallurgically produced AlCrFeNiTi multi-principle element alloys10.1007/s00161-019-00820-z ↗
21. Thermo-Calc and DICTRA, Computational tools for materials science10.1016/S0364-5916(02)00037-8 ↗
22. The high energy materials science beamline at PETRA III10.4028/www.scientific.net/MSF.571-572.261 ↗
23. Method for the simultaneous determination of anisotropic residual stresses and texture by x–ray diffraction10.1063/1.358006 ↗
24. First principles calculations of the structure and elastic constants of α, β and γ uranium10.1016/j.jnucmat.2012.09.019 ↗
25. Configurational thermodynamics of the Fe-Cr σ phase10.1103/PhysRevB.84.184206 ↗
26. S. Wolff-Goodrich, A. Marshal, K. G. Pradeep, G. Dehm, J. M. Schneider, C. Liebscher, Combinatorial exploration of B2/L21 precipitation strengthened AlCrFeNiTi compositionally complex alloys, SSRN Electron. J.doi:10.2139/ssrn.3426873..
27. Heat treatment temperature influence on ASTM A890 GR 6A super duplex stainless steel microstructure10.1016/j.matchar.2005.05.008 ↗
28. Effect of heat treatment on the mechanical properties of ASTM A 890 Gr6A super duplex stainless steel
29. Microstructure stability of high nitrogen alloyed duplex stainless steels at elevated temperatures and its relation to magnetic properties
30. Influence of temperature, cold deformation and a constant mechanical load on the microstructural stability of a nitrogen alloyed duplex stainless steel10.1016/j.msea.2005.09.117 ↗