Impact and wetting properties of Au nanoparticle on Cu(001) textured surfaces by molecular dynamics
Source abstract
Abstract
Abstract The purpose of this research is to shed more light on the intermixing and deformation of an Au nanoparticle during a deposition process on a Cu substrate by using molecular dynamics simulation. This study investigates the influence of surface conditions, incident angle, speed impact, and diameter of Au particle on the deformation behaviors, temperature, and the bonding between it and Cu substrate. The results reveal that after deposition, the high-stress zone, structure change, and dislocation mostly concentrate at the interfacial zone. The Au particle's deformation behaviors and dislocation evolutions closely relate to three stages, which are impacting, after impact, and relaxation stages. Moreover, the higher level of textured surface or the rougher surface generates a greater level of intermixing, flattening ratio, and bonding between the Au particle and Cu substrate. Decreasing the incident angle leads to an increase in the flattening ratio value and the Au–Cu bonding. While increasing the incident velocity from 100 to 700 m/s results in a greatly higher rate of deformation, Au–Cu bonding, and penetration depth. Interestingly, reducing the particle size helps to improve the rate of deformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ion-surface interactions and analysis · Metal and Thin Film Mechanics · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. Molecular simulations of sputtering preparation and transformation of surface properties of Au/Cu alloy coatings under different incident energies10.3390/met9020259 ↗
2. High‐temperature large‐scale self‐assembly of highly faceted monocrystalline Au metasurfaces10.1002/adfm.201806387 ↗
3. Kinetic Monte Carlo simulations of coverage effect on Ag and Au monolayers growth on Cu (1 1 0)10.1016/j.jcrysgro.2019.06.024 ↗
4. Towards the geometric structure of small supported Au 9 clusters on Si10.1038/s41598-018-30750-w ↗
5. High-temperature reliability of sintered microporous Ag on electroplated Ag, Au, and sputtered Ag metallization substrates10.1007/s10854-017-8087-8 ↗
6. Engineering plasmonic nanostructured surfaces by pulsed laser deposition10.1016/j.apsusc.2017.11.025 ↗
7. Nanoplasmonic response of porous Au-TiO2 thin films prepared by oblique angle deposition10.1088/1361-6528/ab068e ↗
8. Quantum size effect in ultrathin Au films on the Si(111) surface10.1016/j.apsusc.2015.01.089 ↗
9. Integration of plasmonic Au nanoparticles in TiO2 hierarchical structures in a single-step pulsed laser co-deposition10.1016/j.matdes.2018.06.051 ↗
10. A case study of thin film stress evolution at a dissimilar material interface via molecular dynamics simulations: gold film growth on a nickel substrate10.1177/1847980418778427 ↗
11. Optimization of nanocomposite Au/TiO2 thin films towards LSPR optical-sensing10.1016/j.apsusc.2017.09.162 ↗
12. Highly conductive and pure gold nanostructures grown by electron beam induced deposition10.1038/srep34003 ↗
13. Pulsed laser deposition of gold thin films with long-range spatial uniform SERS activity10.1007/s00339-019-2527-7 ↗
14. Anion effects on the interfacial alloying in successively electrodeposited Cu and Au ultrathin films10.1016/j.jallcom.2018.05.229 ↗
15. Characterization of gold nanoparticle thin film prepared by electrophoretic deposition method10.1007/s13404-020-00268-z ↗
16. Cold spray coating: review of material systems and future perspectives10.1179/1743294414Y.0000000270 ↗
17. Numerical simulation of deformation behavior of Al particles impacting on Al substrate and effect of surface oxide films on interfacial bonding in cold spraying10.1016/j.apsusc.2006.11.020 ↗
18. Cold spray characteristics of commercially pure Ti and Ti-6Al-4V
19. Bonding mechanism in cold gas spraying10.1016/S1359-6454(03)00274-X ↗
20. Dynamic recrystallization in the particle/particle interfacial region of cold-sprayed nickel coating: electron backscatter diffraction characterization10.1016/j.scriptamat.2009.07.020 ↗
21. Porous titanium-hydroxyapatite composite coating obtained on titanium by cold gas spray with high bond strength for biomedical applications10.1016/j.colsurfb.2019.04.048 ↗
22. Tribological characterization of Nb ion implanted WC-5wt%Ni cold sprayed coatings in dry sliding contact10.1016/j.ijrmhm.2019.105067 ↗
23. Production of annealed cold-sprayed 316L stainless steel coatings for biomedical applications and their in-vitro corrosion response10.1134/S2070205118020168 ↗
24. Critical particle velocity under cold spray conditions10.1016/j.surfcoat.2006.04.061 ↗
25. Room temperature impact consolidation (RTIC) of fine ceramic powder by aerosol deposition method and applications to microdevices10.1007/s11666-008-9163-7 ↗
26. Deposition mechanisms of metallic glass particles by Cold Gas Spraying10.1016/j.actamat.2016.12.007 ↗
27. Effect of water environment on particle deposition of underwater cold spray10.1016/j.apsusc.2019.144542 ↗
28. Intermixing and interfacial morphology of cold-sprayed Al coatings on steel10.1016/j.matlet.2014.07.142 ↗
29. Evaluation of the interfacial bonding between particles and substrate in angular cold spray10.1016/j.matlet.2016.03.036 ↗
30. Development of a generalized parameter window for cold spray deposition10.1016/j.actamat.2005.10.005 ↗
31. Size-and density-controlled deposition of Ag nanoparticle films by a novel low-temperature spray chemical vapour deposition method—research into mechanism, particle growth and optical simulation10.1007/s11051-017-3834-6 ↗
32. A comparison of cold spray technique to single particle micro-ballistic impacts for the deposition of polymer particles on polymer substrates10.1016/j.surfcoat.2018.07.053 ↗
33. Saltwater corrosion behavior of cold sprayed AA7075 aluminum alloy coatings10.1016/j.corsci.2017.10.033 ↗
34. Influence of thermal properties and temperature of substrate on the quality of cold-sprayed deposits10.1016/j.actamat.2017.01.040 ↗
35. Deposition behavior of cold-sprayed metallic glass particles onto different substrates10.1016/j.surfcoat.2018.05.047 ↗
36. Deposition characteristic of Al particles on Mg alloy micro-channel substrate by cold spray10.1007/s00170-016-9807-6 ↗
37. Numerical investigations of the effect of oblique impact on particle deformation in cold spraying by the SPH method10.1016/j.apsusc.2010.01.014 ↗
38. Experimental and SPH study of cold spray impact between similar and dissimilar metals10.1179/1743294413Y.0000000237 ↗
39. Analysis of the residual stress and bonding mechanism in the cold spray technique using experimental and numerical methods10.1016/j.surfcoat.2014.04.059 ↗
40. Coalescence and epitaxial self-assembly of Cu nanoparticles on graphene surface: a molecular dynamics study10.1016/j.commatsci.2018.09.039 ↗
41. Development of palladium nanoparticles deposition on a copper substrate using a molecular dynamic (MD) simulation: a cold gas dynamic spray process
42. Effects of incident energy and angle on carbon cluster ions implantation on silicon substrate: a molecular dynamics study10.1088/1674-4926/38/9/092002 ↗
43. Deformation of slow liquid and solid clusters upon deposition: a molecular-dynamics study of Al cluster impact on an Al surface10.1016/j.susc.2006.04.024 ↗
44. The effect of deposition velocity and cluster size on thin film growth by Cu cluster deposition10.1016/j.commatsci.2012.07.001 ↗
45. Palladium clusters deposited on the heterogeneous substrates10.1016/j.apsusc.2016.02.220 ↗
46. High-speed collision of copper nanoparticle with aluminum surface: molecular dynamics simulation10.1016/j.apsusc.2016.08.067 ↗
47. Molecular dynamics simulation study on effect of process parameters on coatings during cold spray process10.1016/j.promfg.2018.07.026 ↗
48. Atomic simulation of crystal orientation effect on coating surface generation mechanisms in cold spray10.1016/j.commatsci.2020.109859 ↗
49. Numerical modelling of particle impact and residual stresses in cold sprayed coatings: a review10.1016/j.surfcoat.2021.126835 ↗
50. Deposition of Au N clusters on Au (111) surfaces. I. Atomic-scale modeling10.1103/PhysRevB.62.2825 ↗
51. Molecular dynamics simulation on the deposition behavior of nanometer-sized Au clusters on a Au (001) surface10.1016/S0022-0248(01)00599-1 ↗
52. Effects of cluster size and substrate temperature on the homoepitaxial deposition of Au clusters10.1016/S0022-0248(02)01418-5 ↗
53. The effects of surface roughness geometry of flow undergoing Poiseuille flow by molecular dynamics simulation10.1007/s00231-013-1231-y ↗
54. Molecular dynamic simulation to study the effects of roughness elements with cone geometry on the boiling flow inside a microchannel10.1016/j.ijheatmasstransfer.2019.06.064 ↗
55. The effect of geometrical parameters, roughness and the number of nanoparticles on the self-diffusion coefficient in Couette flow in a nanochannel by using of molecular dynamics simulation10.1016/j.physb.2017.05.014 ↗
56. Atomistic modeling of pileup process in metal deposition manufacture
57. Molecular dynamics investigation of temperature effect and surface configurations on multiple impacts plastic deformation in a palladium-copper composite metal membrane (CMM): a cold gas dynamic spray (CGDS) process10.1016/j.commatsci.2020.109968 ↗
58. MD simulation of growth of Pd on Cu (111) and Cu on Pd (111) substrates10.1016/j.apsusc.2015.08.012 ↗
59. Molecular dynamics simulation of abrasive characteristics and interfaces in chemical mechanical polishing10.1016/j.apsusc.2019.144676 ↗
60. Fast Parallel algorithms for short-range molecular dynamics10.1006/jcph.1995.1039 ↗
61. Molecular dynamics simulation of nonodroplets with the modified Lennard-Jones potential function10.1007/s00231-010-0747-7 ↗
62. Modeling different structures in perturbed Poiseuille flow in a nanochannel by using of molecular dynamics simulation: study the equilibrium10.1016/j.physa.2018.09.177 ↗
63. Molecular dynamics study of an electro-kinetic fluid transport in a charged nanochannel based on the role of the stern layer10.1016/j.physa.2015.01.043 ↗
64. Visualization and analysis of atomistic simulation data with OVITO–the Open Visualization Tool
65. Effect of particle shape on mechanics of impact in the deposition of titanium nanoparticles on a titanium substrate10.1016/j.surfcoat.2020.125880 ↗
66. Structural and mechanical characterization of sputtered CuxNi100-x thin film using molecular dynamics10.1016/j.jpcs.2020.109663 ↗
67. Atomistic simulation of effects of temperature and velocity on tensile-deformed Au/Cu/Au/Cu films10.1016/j.tsf.2017.07.068 ↗
68. Comparing grain boundary energies in face-centered cubic metals: Al, Au, Cu and Ni10.1016/j.scriptamat.2010.06.040 ↗
69. Molecular dynamics simulation of thermal welding morphology of Ag/Au/Cu nanoparticles distributed on Si substrates10.1080/00150193.2020.1761698 ↗
70. Deformation of copper particles upon impact: a molecular dynamics study of cold spray10.1016/j.commatsci.2019.109219 ↗
71. Unravelling ultrafast deformation mechanisms in surface deposition of titanium nanoparticles10.1016/j.apsusc.2019.05.271 ↗
72. Molecular dynamics simulation on the single particle impacts in the aerosol deposition process10.2320/matertrans.46.1235 ↗
73. Coating by the cold spray process: a state of the art10.3221/IGF-ESIS.08.03 ↗
74. Atomistic simulations of interfacial deformation and bonding mechanism of Pd-Cu composite metal membrane using cold gas dynamic spray process10.1016/j.vacuum.2020.109779 ↗
75. Effect of velocity and impact angle on residual stress generation in cold spray process – a molecular dynamics simulation study10.1016/j.promfg.2020.05.113 ↗