Sol-modified sintering-induced mesoporous polytetrafluoroethylene/poly(acrylic acid-co-hydroxyethyl methacrylate) composite fiber as an adsorbent with high adsorption capacity for dyes
Source abstract
Abstract
Abstract An extremely spinnable polymer, poly (acrylic acid-co-hydroxyethyl methacrylate) (P(AA-co-HEMA)), was used as a carrier to facilitate the formation of wet-spun polytetrafluoroethylene (PTFE) fiber. A simple technique combining sol modification with sintering treatment was then applied to process the wet-spun fiber into hydrophobic composite fiber with large numbers of mesopores and water-wettable sites. Due to the well-developed porous structure and essential hydrophilic feature, the composite fiber exhibited an outstanding capability to adsorb methylene blue (MB) from water. The research results showed that the maximum adsorption capacity of composite fiber for MB can reach to 155.75 mg/g. At each cycle, 0.05 g composite fiber can remove 90% of MB from 10 mL fresh MB solution with a concentration of 20 mg/L within 90 min by adsorption, manifesting the high efficiency of obtained composite fiber. In addition to MB, the composite fiber also showed a great capability to adsorb other dyes within a short time. Therefore, it is believable that the prepared fiber will gain a broad attention in the field of dye wastewater treatment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Adsorption and biosorption for pollutant removal · Graphene research and applications · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. A review on advanced physico-chemical and biological textile dye wastewater treatment techniques10.1007/s11157-020-09543-z ↗
2. Toward real textile wastewater treatment: membrane fouling control and effective fractionation of dyes/inorganic salts using a hybrid electrocoagulation-Nanofiltration process10.1016/j.seppur.2019.01.070 ↗
3. Textile dye wastewater characteristics and constituents of synthetic effluents: a critical review10.1007/s13762-018-2130-z ↗
4. Recent advances in anaerobic biological processes for textile printing and dyeing wastewater treatment: a mini-review10.1007/s11274-018-2548-y ↗
5. Underwater microplasma bubbles for efficient and simultaneous degradation of mixed dye pollutants10.1016/j.scitotenv.2020.142295 ↗
6. Synthetic organic dyes as contaminants of the aquatic environment and their implications for ecosystems: a review10.1016/j.scitotenv.2020.137222 ↗
7. Feasibility of industrial-scale treatment of dye wastewater via bio-adsorption technology10.1016/j.biortech.2019.01.002 ↗
8. The potential of Kevlar aramid nanofiber composite membranes10.1039/D0TA01654C ↗
9. Sulfate radicals-based advanced oxidation technology in various environmental remediation: a state-of-the-art review10.1016/j.cej.2020.126232 ↗
10. A review on chemical coagulation/flocculation technologies for removal of colour from textile wastewaters10.1016/j.jenvman.2011.09.012 ↗
11. A critical review on recent advancements of the removal of reactive dyes from dyehouse effluent by ion-exchange adsorbents10.1016/j.chemosphere.2018.06.043 ↗
12. Discoloration of indigo dyes by eco-friendly biocatalysts10.1016/j.dyepig.2020.108749 ↗
13. A review of adsorptive remediation of environmental pollutants from aqueous phase by ordered mesoporous carbon10.1016/j.cej.2020.126286 ↗
14. Recent advances for dyes removal using novel adsorbents: a review10.1016/j.envpol.2019.05.072 ↗
15. Dye and its removal from aqueous solution by adsorption: a review10.1016/j.cis.2014.04.002 ↗
16. Preparation, characterization, and applications of electrospun ultrafine fibrous PTFE porous membranes10.1016/j.memsci.2016.10.019 ↗
17. Electrospun poly(tetrafluoroethylene) nanofiber membranes from PTFE-PVA-BA-H2O gel-spinning solutions10.1007/s12221-016-6453-4 ↗
18. Dye adsorption on zinc oxide nanoparticulates atomic-layer-deposited on polytetrafluoroethylene membranes10.1002/aic.15293 ↗
19. Adsorption of anion polyacrylamide from aqueous solution by polytetrafluoroethylene (PTFE) membrane as an adsorbent: kinetic and isotherm studies10.1016/j.jcis.2019.03.008 ↗
20. Fiber prepared via swelling and thermal cross-linking as reusable Fenton catalyst for methylene blue decolorization10.1002/adv.22088 ↗
21. Fibrous material based on a combination of poly(acrylic acid-co-hydroxyethyl methacrylate) with iron ions as a heterogeneous Fenton catalyst for dye oxidative decomposition10.1002/app.44875 ↗
22. PEI/GO-codecorated poly(acrylic acid-co-hydroxyethyl methacrylate) fiber as a carrier to support iron ions and its catalytic performance for methylene blue decolorization10.1080/10601325.2020.1735940 ↗
23. Thermal stability and degradation mechanisms of poly(acrylic acid) and its salts: Part 1-Poly(acrylic acid)10.1016/0141-3910(90)90034-5 ↗
24. Structural, thermal and rheological studies of nanocalcium-strontium hexaferrite/polyacrylic acid composites, Iran
25. Effect of Fe3+ ions present in the structure of poly(acrylic acid)/montmorillonite composites on their thermal decomposition10.1007/s10973-013-3225-x ↗
26. Removal of nitrogen, bromine, and chlorine from PP/PE/PS/PVC/ABS-Br pyrolysis liquid products using Fe- and Ca-based catalysts10.1016/j.polymdegradstab.2004.08.008 ↗
27. Characteristics and applications of the Lagergren's first-order equation for adsorption kinetics10.1016/j.jtice.2010.01.014 ↗
28. On the comparison of pseudo-first order and pseudo-second order rate laws in the modeling of adsorption kinetics10.1016/j.cej.2016.04.079 ↗
29. Theoretical analysis of the pseudo-second order kinetic model of adsorption. Application to the adsorption of Ag(I) to mesoporous silica microspheres functionalized with thiol groups10.1016/j.cej.2012.11.089 ↗
30. Adsorption comparison at the alpha-alumina/water interface: 3, 4-Dihydroxybenzoic acid vs. catechol10.1016/j.colsurfa.2011.07.024 ↗
31. Modeling adsorption of CO2 on amine-functionalized mesoporous silica. 2: kinetics and breakthrough curves10.1016/j.cej.2010.04.042 ↗
32. Facile synthesis of ZIF-8 nanoparticles using polar acetic acid solvent for enhanced adsorption of methylene blue10.1016/j.micromeso.2020.110620 ↗
33. MXene/sodium alginate gel beads for adsorption of methylene blue10.1016/j.matchemphys.2020.124123 ↗
34. Adsorption of methylene blue onto chitosan-montmorillonite/polyaniline nanocomposite10.1016/j.clay.2021.105993 ↗
35. Adsorptive removal of dye in wastewater by metal ferrite-enabled graphene oxide nanocomposites10.1016/j.chemosphere.2020.129518 ↗
36. Activated carbon from Nauclea diderrichii agricultural waste-a promising adsorbent for ibuprofen, methylene blue and CO210.1016/j.apt.2021.01.031 ↗
37. Utilization of red mud waste into mesoporous ZSM-5 for methylene blue adsorption-desorption studies10.1007/s11356-021-13285-y ↗
38. Gellan gum/graphene oxide aerogels for methylene blue purification10.1016/j.carbpol.2021.117624 ↗
39. Synthesis and characterization of xylan-gelatin cross-linked reusable hydrogel for the adsorption of methylene blue10.1016/j.carbpol.2020.117520 ↗
40. Cross-linked bionanocomposites of hydrolyzed guar gum/magnetic layered double hydroxide as an effective sorbent for methylene blue removal10.1016/j.carbpol.2021.117628 ↗