Post-bonded compressive behavior and processing map of TiAl/Ti2AlNb joint along the bonding interface based on a composite model
Source abstract
Abstract
Abstract Post-bonded compression of TiAl/Ti2AlNb joint was conducted between deformation temperatures 950 °C and 1050 °C, with the strain rate range of 0.001 s−1–0.0001 s−1 and the height reduction of 50% in the present work. And the hot deformation behavior of the joint was investigated based on an analysis of the strain-stress curve, Arrhenius constitutive equation and processing map. The Arrhenius relationship (AR) and the parallel Arrhenius relationship (PAR) were established to describe the flow stress as a function of the strain rates and deformation temperatures. As a consequence, the average error between the AR and the PAR was only 1.1%, showing that the bonding interface has a feeble influence on the hot compression process of the joint. Moreover, an optimized processing map of the joint was constructed by overlaying the macro-instability map on the interfacial microstructure control region. The stability region of the joint was defined to this domain with the deformation temperature higher than 1050 °C and the strain rate lower than 0.0005 s−1. On balance, this work can be used to not only improve the hot working ability of the joint but also develop the interfacial microstructure of the joint.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · High-Velocity Impact and Material Behavior · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Design, processing, microstructure, properties, and applications of advanced intermetallic TiAl alloys10.1002/adem.201200231 ↗
2. Light-weight intermetallic titanium aluminides – status of research and development10.4028/www.scientific.net/AMR.278.551 ↗
3. Phase precipitation behavior of a quenched β-solidifying TiAl alloy with a fully-B2 microstructure during annealing at 800°C10.1016/j.jallcom.2019.152118 ↗
4. Metadynamic recrystallization behavior of β-solidified TiAl alloy during post-annealing after hot deformation10.1016/j.intermet.2019.106679 ↗
5. Characterization of the interfacial-microstructure evolution and void shrinkage of Ti-22Al-25Nb orthorhombic alloy with different surface roughness during diffusion bonding10.1016/j.intermet.2017.07.009 ↗
6. Development of β-solidifying γ-TiAl alloys sheet10.1016/j.matlet.2017.03.173 ↗
7. Low-temperature superplasticity of forged Ti–43Al–4Nb–2Mo–0.5B alloy10.1016/j.jallcom.2012.07.127 ↗
8. Multi-step heat treatment design for nano-scale lamellar structures of a cast Ti-45Al-8.5Nb-(W, B, Y) alloy10.1016/j.intermet.2016.09.006 ↗
9. The intermetallic Ti2AlNb10.1016/S0079-6425(97)00012-1 ↗
10. A new ordered orthorhombic phase in a Ti3Al-Nb alloy10.1016/0001-6160(88)90141-1 ↗
11. Instability of the O-phase in Ti–22Al–25Nb alloy during elevated-temperature deformation10.1016/j.jallcom.2013.05.018 ↗
12. The role of process parameters in plasma surface chromising of Ti2AlNb-based alloys10.1016/j.apsusc.2009.07.076 ↗
13. Microstructure evolution of electron beam welded joints of Ti-43Al-9V-0.3Y and Ti-6Al-4V alloys10.1016/j.matlet.2018.09.042 ↗
14. Transient liquid phase (TLP) bonding of Ti2AlNb alloy using Ti/Ni interlayer: microstructure characterization and mechanical properties10.1016/j.jallcom.2016.03.286 ↗
15. Relationship between microstructure and mechanical properties of TiAl/Ti2AlNb joint brazed using Ti-27Co eutectic filler metal10.1016/j.matdes.2017.02.067 ↗
16. Microstructure and phase evolution in γ-TiAl/Ti2AlNb dual alloy fabricated by direct metal deposition10.1016/j.intermet.2018.12.008 ↗
17. Microstructure evolution and mechanical properties of diffusion bonding high Nb containing TiAl alloy to Ti2AlNb alloy10.1016/j.vacuum.2019.03.010 ↗
18. High temperature deformation behavior of near γ-phase high Nb-containing TiAl alloy10.1016/j.intermet.2014.03.013 ↗
19. Flow characteristics and constitutive modeling for elevated temperature deformation of a high Nb containing TiAl alloy10.1016/j.intermet.2014.01.007 ↗
20. Characterization of the high temperature deformation behavior of two intermetallic TiAl-Mo alloys10.1016/j.msea.2015.09.077 ↗
21. High temperature deformation behaviors of Ti-45Al-2Nb-1.5V-1Mo-Y alloy10.1016/j.intermet.2011.07.025 ↗
22. Characterization of the hot deformation behavior of a Ti-22Al-25Nb alloy using processing maps based on the Murty criterion10.1016/j.intermet.2011.08.027 ↗
23. Processing maps for hot working of titanium alloys10.1016/S0921-5093(97)00782-X ↗
24. Hot working of commercial Ti–6Al–4V with an equiaxed α–β microstructure: materials modeling considerations10.1016/S0921-5093(00)00741-3 ↗
25. Hot working behavior of near alpha titanium alloy analyzed by mechanical testing and processing map10.1016/S1003-6326(20)65319-5 ↗
26. Microstructure/texture evolution maps to optimize hot deformation process of near-α titanium alloy10.1016/j.pnsc.2020.01.004 ↗
27. Hot working of Ti–6Al–3Mo–2Zr–0.3Si alloy with lamellar α+β starting structure using processing map10.1016/j.matdes.2008.07.031 ↗
28. Dynamic recrystallization: plasticity enhancing structural development10.1016/j.jallcom.2003.10.067 ↗
29. On the mechanism of hot deformation
30. Hot deformation behavior of TC11/Ti–22Al–25Nb dual-alloy in isothermal compression10.1016/S1003-6326(15)63832-8 ↗
31. Characterization of hot deformation behavior and processing map of FGH4096-GH4133B dual alloys10.1016/j.jallcom.2015.02.010 ↗
32. The flow behavior and constitutive equation in isothermal compression of FGH4096-GH4133B dual alloy10.1016/j.matdes.2014.06.063 ↗
33. Flow characteristics and deformation mechanisms for TiAl/Ti2AlNb diffusion bonded joint10.1016/j.matchemphys.2018.08.066 ↗
34. Dynamic effects on flow and fracture during isothermal forging of a titanium alloy10.1016/0036-9748(80)90102-7 ↗
35. Modeling of dynamic material behavior in hot deformation: forging of Ti-624210.1007/BF02664902 ↗
36. Materials modeling and simulation of isothermal forging of rolled AZ31B magnesium alloy: anisotropy of flow10.1016/j.matdes.2011.01.050 ↗
37. Modeling the hot deformation behaviors of as-extruded 7075 aluminum alloy by an artificial neural network with back-propagation algorithm10.1515/htmp-2015-0108 ↗
38. A modified constitutive equation for elevated temperature flow behavior of Ti-6Al-4V alloy based on double multiple nonlinear regression10.1016/j.msea.2013.04.091 ↗