journal article·2021-07

Anti-oxidation characteristics of Silicon Carbide coating layer for skutterudite thermoelectric modules

Yeongseon Kim, Changho Yeon, Giwan Yoon, Sang Hyun Park

Publisher page

Abstract

Abstract Skutterudite (SKD) based thermoelectric materials are promising candidates for use in thermoelectric devices at intermediate temperatures (300–600 °C) for waste heat recovery applications, owing to their high dimensionless figure of merit and power factor. However, these materials are reported to exhibit pesting-like oxidation; therefore, it is necessary to develop protective coating technologies at device level to suppress the oxidation of SKD materials for terrestrial power generation applications. Several coating layers including Al2O3, MgO, and SiC were investigated to enhance the durability of SKD materials upon exposure to air. The SiC coating layer effectively prevents oxygen diffusion into the SKD even after thermal aging in air at 450 °C for 10 h. Further, the SiC coating layer was tightly bonded to the SKD without forming an intermetallic compound with SKD. To verify the performance change of SKD after thermal aging, an SKD uni-couple was fabricated and its internal resistance and open-circuit voltage were measured. The obtained thermoelectric parameters demonstrated that the SiC coating layer could prevent the performance degradation of SKD due to oxygen diffusion.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Expansion and Ionic Conductivity · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. High-efficiency half-Heusler thermoelectric modules enabled by self-propagating synthesis and topologic structure optimization10.1039/C9EE02228G ↗
2. High-efficiency and stable thermoelectric module based on liquid-like materials10.1016/j.joule.2019.04.010 ↗
3. Half‐heusler thermoelectric module with high conversion efficiency and high power density10.1002/aenm.202000888 ↗
4. Experimental prototype and simulation optimization of micro-radial milliwatt-power radioisotope thermoelectric generator10.1016/j.applthermaleng.2017.07.022 ↗
5. A stacked and miniaturized radioisotope thermoelectric generator by screen printing10.1016/j.sna.2017.10.055 ↗
6. Electrodeposition preparation and optimization of fan-shaped miniaturized radioisotope thermoelectric generator10.1016/j.energy.2019.116873 ↗
7. Development concept for a high-efficiency cascaded thermoelectric radioisotope power system
8. Nano-micro-porous skutterudites with 100% enhancement in ZT for high performance thermoelectricity10.1016/j.nanoen.2016.11.016 ↗
9. Realizing high-performance thermoelectric power generation through grain boundary engineering of skutterudite-based nanocomposites10.1016/j.nanoen.2017.10.003 ↗
10. High performance thermoelectric module through isotype bulk heterojunction engineering of skutterudite materials10.1016/j.nanoen.2019.104193 ↗
11. High-performance n-type YbxCo4Sb12: from partially filled skutterudites towards composite thermoelectrics10.1038/am.2016.77 ↗
12. Grain boundary engineering with nano-scale InSb producing high performance InxCeyCo4Sb12+z skutterudite thermoelectrics
13. Characterization of multiple-filled skutterudites with high thermoelectric performance10.1016/j.jallcom.2019.152272 ↗
14. Melt spinning synthesis of p-type skutterudites: drastically speed up the process of high performance thermoelectrics10.1016/j.scriptamat.2016.01.035 ↗
15. Sustainable and simple processing technique for n-type skutterudites with high ZT and their analysis10.1016/j.actamat.2019.04.025 ↗
16. Multiple-filled skutterudites: high thermoelectric figure of merit through separately optimizing electrical and thermal transports10.1021/ja111199y ↗
17. Transport and structural properties of binary skutterudite CoSb3 thin films grown by dc magnetron sputtering technique10.1063/1.1513188 ↗
18. Oxidation behavior of the skutterudite10.1007/s11085-019-09908-y ↗
19. Aging effects of large-size n-type CoSb3 prepared by spark plasma sintering10.1016/S0925-8388(02)00902-7 ↗
20. Antioxidation and thermoelectric properties of ZnO nanoparticles-coated β-FeSi210.1016/j.matchemphys.2011.04.022 ↗
21. Oxidation suppression characteristics of the YSZ coating on Mg2Si thermoelectric legs10.1016/j.ceramint.2016.03.161 ↗
22. Oxidation and sublimation suppression of PbTe thermoelectric legs by plasma coated ceramic layers
23. Improved oxidation resistance of thermoelectric skutterudites coated with composite glass10.1016/j.ceramint.2012.11.051 ↗
24. Si-O-C amorphous coatings for high temperature protection of In0.4Co4Sb12 skutterudite for thermoelectric applications10.1063/1.5097284 ↗
25. Influence of preparation technology on the microstructure and anti-oxidation property of SiC-Al2O3-mullite multi-coatings for carbon/carbon composites10.1016/j.apsusc.2005.07.004 ↗
26. Preparation and anti-oxidation performance of Al2O3-containing TaSi2-MoSi2-borosilicate glass coating on porous SiCO ceramic composites for thermal protection10.1039/C8RA00703A ↗
27. A MgO–SiO2–Al2O3–ZnO ceramic-glass coating to improve the anti-oxidation of carbon steel at high temperature10.2355/isijinternational.ISIJINT-2017-602 ↗