journal article·2020-07

The effects of indium addition on mechanical properties and shape memory behavior of Ti-Ta-Zr high temperature alloys

X.H. Zheng, R. Ning, C.L. Tan, S. Huang, Z.G. Zhang, W. Cai

Publisher page

Abstract

Abstract The effects of indium on the microstructure, transformation temperature, mechanical properties, and shape memory effect of (Ti83Ta17)85−xZr15Inx alloys were investigated. The results showed that (Ti83Ta17)85−xZr15Inx (x = 1, 3, 5)(at%) alloys were all composed of orthorhombic α"-martensitic phase. The reverse martensitic transformation starting temperature (As) was 346 °C for x = 1 and increased with increasing indium content. The Young's modulus firstly decrease then increase with the addition of Indium. When the Indium content is 1 at%, the lowest strength and the largest elongation 25.8% can be obtained. The minor addition of indium can make up for the deficiency of low plasticity and retained a relatively large shape memory recovery strain. A prefect recovery strain of 4% were obtained in all (Ti83Ta17)85−xZr15Inx alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Shape Memory Alloy Transformations · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. High temperature shape memory alloys10.1179/095066010X12646898728363 ↗
2. Effect of Zr content on mechanical properties of Ti-Ni-Zr shape memory alloy films prepared by DC magnetron sputtering10.1016/j.vacuum.2008.04.026 ↗
3. Thermal stability and high-temperature shape memory effect of Ni55.2Mn24.7Ga19.9Gd0.2 thin film10.1016/j.vacuum.2017.10.022 ↗
4. Study of martensitic transformation in TiNiCuNb shape memory alloys using dynamic mechanical analysis10.1016/j.vacuum.2018.06.040 ↗
5. Indentation size effect and strain rate sensitivity of Ni3Ta high temperature shape memory alloy
6. TEM study on the formation of intragranular α precipitates in the Ti-16Nb alloy10.1016/j.vacuum.2018.07.042 ↗
7. Martensite structure and mechanical property of Ti-Nb-Ag shape memory alloys for biomedical applications10.1016/j.vacuum.2018.07.029 ↗
8. The effect of annealing treatment on microstructure and shape memory behavior of Ti-Ta-Zr thin films10.1016/j.vacuum.2018.03.044 ↗
9. Shape memory behavior of Ti–Ta and its potential as a high-temperature shape memory alloy10.1016/j.actamat.2008.10.041 ↗
10. Martensitic transformation, shape memory effect and superelasticity of Ti–Nb binary alloys10.1016/j.actamat.2006.01.019 ↗
11. Martensitic microstructures and mechanical propertiesof as-quenched metastable b-type Ti–Mo alloys10.1007/s10853-016-9976-6 ↗
12. Effect of ternary alloying elements on the shape memory behavior of Ti–Ta alloys10.1016/j.actamat.2009.02.007 ↗
13. Novel β-TiTaAl alloys with excellent cold workability and a stable high-temperature shape memory effect10.1016/j.scriptamat.2011.03.004 ↗
14. Thermal stability and high-temperature shape memory effect of Ti–Ta–Zr alloy10.1016/j.scriptamat.2013.03.008 ↗
15. Investigation of the titanium–indium system10.1016/S0925-8388(03)00319-0 ↗
16. Elastic softening of β-type Ti–Nb alloys by indium (In) additions10.1016/j.jmbbm.2014.07.010 ↗
17. Deformation-induced nanostructuring in a Ti–Nb–Ta–In β alloy10.1063/1.2222239 ↗
18. Design of ductile bulk metallic glasses by adding “soft” atoms10.1063/1.3700721 ↗
19. Effect of Zr on the martensitic transformation and the shape memory effect in Ti-Zr-Nb-Ta high-temperature shape memory alloys10.1016/j.jallcom.2017.12.003 ↗
20. Microstructure and shape memory effect of Ti-20Zr-10Nb alloy10.1016/j.msea.2009.08.063 ↗
21. Effect of Ta addition on shape memory behavior of Ti–22Nb alloy10.1016/j.msea.2005.10.065 ↗