Effects of austenite regeneration heat treatment on the TLP bonding of duplex stainless steel UNS S32750 using Fe-B-Si insert metal
Source abstract
Abstract
Abstract This study discusses microstructural evolution during transient liquid phase (TLP) bonding and the effect of austenite regeneration heat treatment with regard to nitrogen-containing duplex stainless steel UNS S32750. TLP bonding was performed between the temperature range of 1423–1473 K for 0–1000 s under a vacuum of 5 × 10−5 Torr using an amorphous Fe-B-Si insert metal. The results showed that the volume fraction of austenite (γ) decreased with an increased bonding temperature and holding time. In the case of a prolonged holding time, a depleted area of the γ phase was observed in the base metal adjacent to joints. In order to prevent this phenomenon, an austenite regeneration heat treatment process was performed. The austenite volume fraction of the base metal and joint area increased with an increase in austenite regeneration heat treatment time; deviation of the austenite volume fraction between the base metal and joint area decreased. In this study, homogenization behaviors of joint microstructures were treated through a diffusion model. Bonding and austenite formation processes at the joints were divided into 4 steps: base metal dissolution, boride disappearance and joint widening, austenite growth to the joint, and homogenization.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Nilsson · Mater. Sci. Technol. · 1992 · 8 · 68510.1179/mst.1992.8.8.685 ↗
2. Solomon · 1982 · 693
3. Lopez · Corros. Sci. · 1999 · 41 · 161510.1016/S0010-938X(99)00009-8 ↗
4. Kotccki · Weld. J. · 1989 · 68 · 431s
5. Hilkes · Weld. J. · 1995 · 74 · 51
6. Matsunaga · Sci. Technol. Weld. Join. · 1998 · 3 · 22510.1179/stw.1998.3.5.225 ↗
7. Sato · Sci. Technol. Weld. Join. · 1999 · 4 · 4110.1179/stw.1999.4.1.41 ↗
8. Walker · Mater. Sci. Technol. · 1988 · 4 · 7810.1179/mst.1988.4.1.78 ↗
9. Zacharia · Metall. Trans. · 1989 · A20 · 95710.1007/BF02651661 ↗
10. Potgieter · Br. Corros. J. · 1992 · 27 · 21910.1179/000705992798268530 ↗
11. Lippold · 1994
12. Kivineva · 1994
13. Islam · Scr. Mater · 1998 · 38 · 118710.1016/S1359-6462(98)00037-2 ↗
14. Khan · J. Mater. Sci. · 1996 · 31 · 293710.1007/BF00356005 ↗
15. Ikawa · Trans. Jpn. Weld. Soc. · 1977 · 8 · 3
16. Nakao · 1989 · 775
17. Gale · Metall. Trans. A · 1996 · 27A · 192510.1007/BF02651942 ↗
18. C.Y. Kang, C.S. Woo, T.K. Han, C.H. Hong, D.U. Kim and Y.C. Woo:Proc. Conf. ‘2001 International Brazing & Soldering’, Yangzhong, China, 148–155.
19. Liou · Corros. Sci. · 2002 · 44 · 284110.1016/S0010-938X(02)00068-9 ↗
20. Verros · Comput. Mater. Sci. · 2002 · 24 · 38010.1016/S0927-0256(01)00259-2 ↗
21. Chen · Mater. Sci. Eng. · 2001 · A311 · 2810.1016/S0921-5093(01)00911-X ↗
22. Crank · 1975 · 13
23. The Japan Institute of Metals · 1993 · 21