journal article·2012-09

Synthesis and electrical characteristics of (1 − x)BaTiO3–xK0.5Bi0.5TiO3 PTCR ceramics

T.A. Plutenko, O.I. V'yunov, A.G. Belous

Materials Chemistry and Physics· Volume 136· Issue 1
Publisher page

Abstract

Solid solutions of (1 − x)BaTiO3–xK0.5Bi0.5TiO3 were prepared by the solid state reaction technique. Samples were sintered in reducing atmosphere of N2/H2 in the temperature range 1100–1240 °C with subsequent oxidation at 700 °C. Phase composition and crystal structure were investigated by X-ray powder diffractometry (XRPD). It was shown that all samples of (1 − x)BaTiO3–xK0.5Bi0.5TiO3 (0 ≤ x < 0.4) exhibit a tetragonal structure at room temperature, the parameters a and c decrease with increasing x. With increasing x the Curie temperature of solid solutions (1 − x)BaTiO3–xK0.5Bi0.5TiO3 (0.1 ≤ x < 0.4) increases from 150 to 220 °C. The values of potential barriers at grain boundaries were calculated on the basis of Heywang model. With increasing x, the potential barrier at grain boundaries increases. It was shown that the grain size decreases with increasing the bismuth–potassium titanate content. The complex impedance results indicate that the grain boundary and the outer layer region, located between the boundary and the core of the grain, make a contribution to the positive temperature coefficient of resistance (PTCR) effect in (1 − x)BaTiO3–xK0.5Bi0.5TiO3 solid solutions. With increasing x ρmax increases due to an increase in potential barrier at grain boundaries. Highlights ► BaTiO3–K0.5Bi0.5TiO3 samples were synthesized by solid state reactions technique. ► Resistance of ceramic increases with x due to a decrease in ceramic`s grain size. ► With increasing x, the potential barrier at grain boundaries increases. ► Specimens of BaTiO3–K0.5Bi0.5TiO3 with Curie temperature up to 220 °C were obtained. ► The outer layer and the grain boundary make a contribution to the PTCR effect.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Characterization of lanthanum-doped barium titanate ceramics using impedance spectroscopy10.1111/j.1151-2916.2001.tb00694.x ↗
2. Effects of TiO2 and SiO2 additions on phase formation, microstructures and PTCR characteristics of Sb-doped barium strontium titanate ceramics10.1016/j.jeurceramsoc.2004.06.015 ↗
3. Fabrication and properties of semiconducting barium lead titanate ceramics containing low-melting glass additions10.1023/A:1024069707870 ↗
4. Directive 2002/95/Ec of the European parliament and of the council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
5. Positive temperature coefficient of resistivity in potassium-bismuth titanate
6. Annealing effects on the characteristics of high Tc lead-free barium titanate-based positive temperature coefficient of resistivity ceramics10.1063/1.3013447 ↗
7. Fabrication and positive temperature coefficient of resistivity properties of semiconducting ceramics based on the BaTiO3–(Bi1/2K1/2)TiO3 system10.1016/j.jeurceramsoc.2009.08.009 ↗
8. Synthesis of Y-doped BaTiO3–(Bi1/2K1/2)TiO3 lead-free positive temperature coefficient of resistivity ceramics and their PTC effects10.1111/j.1551-2916.2009.03251.x ↗
9. Revised effective ionic radii and systematic studies of interatomic distances in halides and chalcogenides10.1107/S0567739476001551 ↗
10. Specific features of the polarization in the PbFe1/2Nb1/2O3 ferroelectric10.1134/S1063783412050137 ↗
11. Structure and piezoelectric properties of Bi0.5Na0.5TiO3–Bi0.5K0.5TiO3–BiFeO3 lead-free piezoelectric ceramics10.1016/j.matchemphys.2008.10.063 ↗
12. Electrical properties of PTCR barium titanate10.1111/j.1151-2916.1990.tb06570.x ↗
13. Semiconducting barium titanate10.1007/BF00550094 ↗
14. Distribution of manganese ions and its effect on the properties of PTCR ceramic10.1023/A:1022159032378 ↗
15. Anomaly in La-doped BaTiO310.1111/j.1151-2916.2001.tb00684.x ↗
16. Use of succinic acid to test the stability of PTCR barium titanate ceramics under reducing conditions10.1111/j.1151-2916.1995.tb08393.x ↗
17. Characterization of electrical materials, especially ferroelectrics, by impedance spectroscopy10.1023/A:1009950415758 ↗