journal article·2023-02

The enhanced PdAuPt-nitrogen-doped graphene/ITO anode electrodes for electrooxidation of glucose in alkaline medium

Aykut Caglar

Publisher page

Abstract

© 2022 Elsevier B.V.The chemical vapor deposition (CVD) method was used to synthesize nitrogen-doped graphene (N-G). N-G coated on Cu foil via CVD method was transferred onto indium tin oxide (ITO). Finally, Pd, Au, and Pt metals were electrochemically doped on the N-G/ITO electrode surface. Surface properties and elemental composition analyses were performed with the obtained electrodes by scanning electron microscope-energy dispersive X-ray (SEM-EDX) and mapping. The results of this analysis indicated that both N-doped G and metals were formed on the ITO surface. The catalytic activity, stability, and resistance of the electrodes for glucose (Glu) electrooxidation were investigated by cyclic voltammetry (CV), chronoamperometry (CA), and electrochemical impedance spectroscopy (EIS) analyses, respectively. The PdAuPt–N-G/ITO electrode exhibited a more active surface area and catalytic activity than the PdAu–N-G/ITO electrode, with a specific activity of 9.50 mA/cm2 and an electrochemical active surface area (ECSA) of 61.21 m2/g. In addition, CA and EIS analyses showed that it was more stable and has faster electron transfer with a lower Rct (143.5 Ω) value. In the light of these results, it can be said that the obtained electrode is promising for glucose electrooxidation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrochemical sensors and biosensors · Conducting polymers and applications · Electrochemical Analysis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Towards more active and stable PdAgCr electrocatalysts for formic acid electrooxidation: the role of optimization via response surface methodology10.1002/er.4880 ↗
2. A novel experimental and density functional theory study on palladium and nitrogen doped few layer graphene surface towards glucose adsorption and electrooxidation10.1016/j.jpcs.2020.109684 ↗
3. Enhanced electrochemical glucose oxidation in alkaline solution over indium decorated carbon supported palladium nanoparticles10.1016/j.matchemphys.2020.123318 ↗
4. Ruthenium modified defatted spent coffee catalysts for supercapacitor and methanolysis application10.1002/est2.243 ↗
5. A dual functional material: spirulina Platensis waste-supported Pd-Co catalyst as a novel promising supercapacitor electrode10.1016/j.fuel.2021.121334 ↗
6. An overview and comparison of online implementable SOC estimation methods for lithium-ion battery10.1109/TIA.2017.2775179 ↗
7. The role of carbon in the negative plate of the lead–acid battery10.1016/j.est.2015.05.002 ↗
8. A remarkable Mo doped Ru catalyst for hydrogen generation from sodium borohydride: the effect of Mo addition and estimation of kinetic parameters10.1007/s11144-020-01884-8 ↗
9. Untangling the cobalt promotion role for ruthenium in sodium borohydride dehydrogenation with multiwalled carbon nanotube-supported binary ruthenium cobalt catalyst10.1002/er.6226 ↗
10. Pt nanoparticles/graphene paste electrode for sodium borohydride electrooxidation10.1007/s10008-012-1880-7 ↗
11. Electrooxidation of sodium borohydride at Pd, Au, and Pd x Au1− x carbon-supported nanocatalysts10.1021/jp902741z ↗
12. Indole-based novel organic anode catalyst for glucose electrooxidation10.1002/er.7282 ↗
13. Superior formic acid electrooxidation activity on carbon nanotube-supported binary Pd nanocatalysts prepared via sequential sodium borohydride reduction technique10.1002/sia.6972 ↗
14. Nickel–rare earth electrodes for sodium borohydride electrooxidation10.1016/j.electacta.2015.12.218 ↗
15. Carbon-supported PdSn and Pd3Sn2 anodes for glucose electrooxidation in alkaline media10.1016/j.apcatb.2014.03.051 ↗
16. Performance studies of Pd–Pt and Pt–Pd–Au catalyst for electro-oxidation of glucose in direct glucose fuel cell10.1016/j.ijhydene.2011.04.158 ↗
17. Synthesis and characterization of Pt–Au/C catalyst for glucose electro-oxidation for the application in direct glucose fuel cell10.1016/j.ijhydene.2011.03.042 ↗
18. Preparation and characterization of a novel nickel–palladium electrode supported by silicon nanowires for direct glucose fuel cell10.1016/j.electacta.2012.01.017 ↗
19. Hierarchically structured Ir@Pt/C composite as an efficient catalyst for glucose electro-oxidation10.1016/j.catcom.2015.06.006 ↗
20. Comparison of electro-catalytic activity of Fe-Ni-Co/C and Pd/C nanoparticles for glucose electro-oxidation in alkaline half-cell and direct glucose fuel cell10.1007/s12678-018-0483-1 ↗
21. Electroplating of Pt–Ni–Cu nanoparticles on glassy carbon electrode for glucose electro-oxidation process10.1080/02670844.2018.1490070 ↗
22. Highly efficient and selective electrooxidation of glucose and xylose in alkaline medium at carbon supported alloyed PdAu nanocatalysts10.1016/j.apcatb.2018.11.006 ↗
23. Nickle-cobalt composite catalyst-modified activated carbon anode for direct glucose alkaline fuel cell10.1016/j.ijhydene.2017.11.114 ↗
24. Glucose electrooxidation over PdxRh/C electrocatalysts in alkaline medium10.1016/j.apcatb.2013.09.024 ↗
25. Performance comparison of Pt–Au/C and Pt–Bi/C anode catalysts in batch and continuous direct glucose alkaline fuel cell10.1016/j.cej.2013.05.049 ↗
26. A binary palladium–bismuth nanocatalyst with high activity and stability for alkaline glucose electrooxidation10.1016/j.jpowsour.2015.04.083 ↗
27. Remarkable bismuth-gold alloy decorated on MWCNT for glucose electrooxidation: the effect of bismuth promotion and optimization via response surface methodology10.3906/kim-2102-16 ↗
28. One-pot synthesis of reduced graphene oxide supported gold-based nanomaterials as robust nanocatalysts for glucose electrooxidation10.1016/j.electacta.2016.06.169 ↗
29. Photo-thermal chemical vapor deposition growth of graphene10.1016/j.carbon.2011.09.025 ↗
30. Effective carbon nanotube supported metal (M=Au, Ag, Co, Mn, Ni, V, Zn) core Pd shell bimetallic anode catalysts for formic acid fuel cells10.1016/j.renene.2019.12.104 ↗
31. Tailoring cadmium composition on titanium dioxide to achieve enhanced photocatalytic glucose fuel cell anode performance10.1021/acsaem.1c02121 ↗
32. The role and effect of CdS-based TiO2 photocatalysts enhanced with a wetness impregnation method for efficient photocatalytic glucose electrooxidation