Effects of termiticides type on workability, hydration characteristics and mechanical property of cementitious materials
Source abstract
Abstract
Abstract The addition of termiticides in concrete is gaining in popularity as method to prevent the degradation of concrete material and structure by the penetration and attack from termiticides, while the effect of which has not been systematically investigated yet. In this paper, the effects of five new generation termiticides on workability and hardened property of cementitious paste and mortars, in terms of minislump, compressive and flexural strength, were investigated. Moreover, the hydration characteristics, including microstructure and hydration products of the cementitious pastes with the termiticides were determined by X-ray diffraction test (XRD) and scanning electron microscopy (SEM). The results illustrated that the incorporation of the termiticides increased the workability while it decreased the compressive and flexural strengths of both paste and mortar. Moreover, the addition of termiticides did not affect the type and quantity of hydration products, especially for the calcium hydroxide. The exception was imidacloprid, in which it damaged the microstructure of cement paste. Based on the investigation, two termiticides, in terms of bifenthrin and chlorpyrifos, were identified as the termiticides with better performance in preparing termite-resistant concrete.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Building materials and conservation · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. Prediction of dam concrete compressive and splitting tensile strength based on wet-screened concrete test results10.1061/(ASCE)MT.1943-5533.0002012 ↗
2. Effect of air entrainment on the mechanical properties, chloride migration, and microstructure of ordinary concrete and fly ash concrete10.1061/(ASCE)MT.1943-5533.0002456 ↗
3. The diffusion characteristic of concrete with mineral admixtures between salt ponding test and accelerated chloride migration test10.1016/j.matchemphys.2003.12.025 ↗
4. Utilisation of municipal solid waste incinerator (MSWI) fly ash with metakaolin for preparation of alkali-activated cementitious material10.1016/j.jhazmat.2020.123451 ↗
5. Eco-efficient cements: potential economically viable solutions for a low-CO2 cement-based materials industry10.1016/j.cemconres.2018.03.015 ↗
6. Corrosion resistances of C30 concrete: effect of finely ground bronze sawdust waste10.1016/j.matchemphys.2019.122588 ↗
7. Molecular dynamics study on ions and water confined in the nanometer channel of Friedel's salt: structure, dynamics and interfacial interaction10.1039/C8CP02450B ↗
8. Comparison of three different methods for measuring chloride transport in predamaged concretes10.1061/(ASCE)MT.1943-5533.0003108 ↗
9. Influence of freeze-thaw cycles on capillary absorption and chloride penetration into concrete10.1016/j.cemconres.2017.05.018 ↗
10. Physically and chemically bound chlorides in hydrated cement pastes: a comparison study of the effects of silica fume and metakaolin10.1007/s10853-018-2953-5 ↗
11. Electrochemical Impedance Spectroscopy: a potential approach for detecting the breakage rate of microcapsules for self-healing cementitious materials10.1016/j.cemconcomp.2020.103776 ↗
12. Distribution of termites10.1126/science.83.2157.410 ↗
13. GPR detection of several common subsurface voids inside dikes and dams10.1016/j.enggeo.2009.12.001 ↗
14. Strength development of termite mound cement paste and concrete10.1016/j.conbuildmat.2018.06.220 ↗
15. Physical properties, microstructure and mineralogy of termite mound material considered as construction materials10.1016/j.clay.2011.02.016 ↗
16. Combined effects of climatic factors on the seasonal termite damage to structural wood in a semi-arid urban system10.1016/0378-7788(91)90089-L ↗
17. Review of modern wood fungal decay research for implementation into a building standard of practice10.1061/(ASCE)MT.1943-5533.0002998 ↗
18. Chemical self-healing system with novel microcapsules for corrosion inhibition of rebar in concrete10.1016/j.cemconcomp.2017.09.012 ↗
19. Forsythe · 2004 · 1
20. Recent advance of chemical admixtures in concrete10.1016/j.cemconres.2019.105834 ↗
21. Effect of polycarboxylate superplasticisers on the fresh properties of cementitious materials mixed with seawater10.1016/j.conbuildmat.2021.123143 ↗
22. Improvement in compatibility of polycarboxylate superplasticizer with poor-quality aggregate containing montmorillonite by incorporating polymeric ferric sulfate10.1016/j.conbuildmat.2017.11.166 ↗
23. Effect of storage condition on basic performance of polycarboxylate superplasticiser system incorporated sodium gluconate10.1016/j.conbuildmat.2019.07.025 ↗
24. Application of cane molasses as concrete retarder admixture10.1007/s42452-019-1608-8 ↗
25. Biological alternatives for termite control: a review10.1016/j.ibiod.2009.05.009 ↗
26. Termite resistant construction: use of a stainless steel mesh to exclude Coptotermes formosanus (Isoptera: rhinotermitidae)
27. Grace · 1999 · 399
28. Peterson · 2006
29. The termite proofing of concrete
30. Concrete-insecticide mixtures toxic to termites10.1093/jee/54.5.1055 ↗
31. Toxicity of dieldrin-concrete mixtures to termites10.1093/jee/57.1.26 ↗
32. Performance of soil termiticides in open field and under roof overhang10.13102/sociobiology.v64i2.1223 ↗
33. Influence of water removal techniques on the composition and microstructure of hardened calcium sulfoaluminate cement pastes10.1617/s11527-020-01527-3 ↗
34. Sorption of fipronil and its metabolites on soils from South Australia10.1081/PFC-100106184 ↗
35. Adsorptive behavior of surfactants on surface of Portland cement10.1016/S0008-8846(01)00511-7 ↗
36. Advances in adsorption of surfactants and their mixtures at solid/solution interfaces10.1016/j.cis.2006.07.004 ↗
37. Effect of surfactants on the yield stress of cement paste10.1016/j.cemconres.2017.04.015 ↗
38. Influence of MWCNT/surfactant dispersions on the rheology of Portland cement pastes10.1016/j.cemconres.2018.02.020 ↗
39. The feasibility of synthetic surfactant as an air entraining agent for the cement matrix10.1016/j.conbuildmat.2007.05.002 ↗
40. Mehta · 2006
41. Mechanism of calcination modification of phosphogypsum and its effect on the hydration properties of phosphogypsum-based supersulfated cement10.1016/j.conbuildmat.2020.118226 ↗
42. Influence of curing time on the drying shrinkage of concretes with different binders and water-to-binder ratios
43. Effect of triisopropanolamine on compressive strength and hydration of cement-fly ash paste10.1016/j.conbuildmat.2018.05.117 ↗
44. Using of modified AlF3 production waste in cement-based materials
45. Understanding the behaviour of graphene oxide in Portland cement paste10.1016/j.cemconres.2018.05.016 ↗
46. Nano-silica and silica fume modified cement mortar used as Surface Protection Material to enhance the impermeability10.1016/j.cemconcomp.2018.05.012 ↗
47. Chemical admixture-cement interactions: phenomenology and physico-chemical concepts10.1016/S0958-9465(97)00062-0 ↗
48. Interactions of polymers and organic admixtures on portland cement hydration10.1016/0008-8846(87)90076-7 ↗
49. Workability, and mechanical, acoustic and thermal properties of lightweight aggregate concrete with a high volume of entrained air10.1016/j.conbuildmat.2011.08.067 ↗
50. The rheological properties of self-compacting concrete containing superplasticizer and air-entraining agent10.1016/j.conbuildmat.2018.01.169 ↗
51. Review on carbonation curing of cement-based materials10.1016/j.jcou.2017.07.003 ↗
52. Strength and microstructure of mortar containing glass powder and/or glass aggregate10.1007/s11595-016-1531-4 ↗
53. Hydraulic activity of municipal solid waste incinerator fly-ash-slag-blended eco-cement10.1016/S0008-8846(00)00423-3 ↗
54. Durability and micro-structure of reactive powder concrete10.1007/s11595-009-3506-1 ↗
55. Hydration development of mineral additives blended cement using thermogravimetric analysis (TGA): Methodology of calculating the degree of hydration10.1016/j.conbuildmat.2017.04.132 ↗