Shiny laminated alumina films prepared by ac oxidation
Source abstract
Abstract
Abstract Laminated alumina films, resembling shell nacre structures, were fabricated via the oxidation of aluminum in sulfuric acid using alternating current (ac). Columnar structures were observed on the surface of the laminated structures when the raising speeds of the ac voltage were smaller than 0.5 V/s; these structures decreased and disappeared as the raising speeds increased. The reflectance spectra of the films showed a peak when the raising speed was higher than 0.5 V/s, resulting in the observed structural color without the presence of dopants such as dyes. The reflectance peak of the film exhibited the highest intensity when the film was prepared at a raising speed of 1 V/s for 1500 s. The peaks in the reflectance spectra of the films tend to shift toward longer wavelengths with the increase in the applied voltage, and the change in color depends on the peak positions. The thickness of each layer increased with an increase in the ac voltage. These results suggest that the structural color affects the thickness of each layer. In particular, the films prepared at an applied voltage of 60 V showed the highest intensities in the reflectance spectra, with a pearlescent appearance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Anodic Oxide Films and Nanostructures · Photonic Crystals and Applications · TiO2 Photocatalysis and Solar Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. A pavement of pearl10.1038/40010 ↗
2. A highly conspicuous mineralized composite photonic architecture in the translucent shell of the blue-rayed limpet10.1038/ncomms7322 ↗
3. On iridescent shells – Part I. Introductory
4. Opal analogue discovered in a weevil10.1038/426786a ↗
5. Colour mixing in wing scales of a butterfly10.1038/35006561 ↗
6. Polarized light as a butterfly mating signal10.1038/423031a ↗
7. Coloration strategies in peacock feathers10.1073/pnas.2133313100 ↗
8. Bioinspired colloidal materials with special optical, mechanical, and cell-mimetic functions10.1039/C2TB00175F ↗
9. Structural coloration in nature10.1039/c3ra41096j ↗
10. Microarchitecture and deposition of gastropod nacre10.1126/science.167.3924.1486 ↗
11. Iridescence of a shell of mollusk Haliotis Glabra10.1364/OPEX.12.004847 ↗
12. Iridescence color of a shell of the mollusk Pinctada Margaritifera caused by diffraction10.1364/OE.4.000177 ↗
13. Iridescent colors on seashells: an optical and structural investigation of Helcion pruinosus10.1364/AO.41.000717 ↗
14. Photonic structures in biology10.1038/nature01941 ↗
15. Brilliant blue observation from a morpho-butterfly-scale quasi-structure10.1143/JJAP.44.L48 ↗
16. Mimicking the colourful wing scale structure of the Papilio blumei butterfly10.1038/nnano.2010.101 ↗
17. The toughening mechanism of nacre and structural materials inspired by nacre10.1088/1468-6996/12/6/064710 ↗
18. Layered nanocomposites inspired by the structure and mechanical properties of nacre10.1039/C1CS15106A ↗
19. Spiral-shaped shell-mimic of terraced-cone alumina by AC oxidization10.1149/1.3607297 ↗
20. Synthesis of laminated alumina films by AC oxidation10.1149/2.108306jes ↗
21. Stacking structure in anodic oxide film on aluminum formed by A. C. Electrolysis10.4139/sfj.45.112 ↗
22. Photonic crystal using anodic porous alumina10.1143/JJAP.38.L1403 ↗
23. Photonic band gap in naturally occurring ordered anodic porous alumina10.1143/JJAP.40.L1217 ↗
24. Distributed Bragg reflector made of anodic alumina membrane10.1016/j.matlet.2008.12.019 ↗
25. Structural coloring of aluminum10.1016/j.elecom.2011.08.008 ↗
26. Nanoporous anodic alumina photonic crystals: fundamentals, developments and perspectives10.1039/C6TC05555A ↗
27. On the generation of interferometric colors in high purity and technical grade Aluminum: an alternative green process for metal finishing Industry10.1016/j.electacta.2015.06.066 ↗
28. Anodizing with voltage versus optical path length modulation: a new tool for the preparation of photonic structures10.1039/C8TC04246B ↗
29. Joannopoulos · 1995
30. Vapor sensing using the optical properties of porous silicon Bragg mirrors10.1063/1.370968 ↗
31. Anodic oxide films on aluminum10.1021/cr60259a005 ↗