journal article·2019-05

Surface purification of uranium by nano-second pulsed laser treatment

Zhilei Chen, Yongbin Zhang, Yin Hu, Dingmu Lang, Xiandong Meng, Chao Lu, Zhen Pu, Huoping Zhong, Ruilong Yang, Kezhao Liu

Publisher page

Abstract

Abstract The corrosion of uranium and its alloy greatly restricts their engineering applications. Surface modification is the main way used to inhibit uranium from corrosion. However, there is a problem that many inclusions still exists on uranium surface after smelting purification, and corrosion sites have been found preferred to nucleate around these inclusions which destroy the integrity of protective coatings and even make it disabled. So, surface purification to deal with these inclusions is an effective method to improve the stability of surface modified layer. In this paper, Nano-second pulsed laser was induced on uranium surface to decrease the content of surface inclusions. The influence of experiment parameters on purification effect was studied by changing the laser energy and scanning speed. The corrosion resistance of uranium before and after laser treatment was tested through electrochemical polar test. The results suggest that the solid inclusion with small size eject out of uranium surface through hydrokinetics eruption caused by rapidly melting and expanding of uranium under and around the inclusion during the interaction process of laser pulse and uranium surface. The inclusion with large scale is covered by melting uranium around it, and then the covering uranium cools and curdles to form a uranium layer over the inclusion. The eruption of the small-sized inclusions and being covered of the large-sized ones reduce the impurity content and purify the surface of uranium. The covering effect on inclusions with large scale improves when the laser energy increases or the scanning speed decreases. After laser surface purification, the corrosion current density of uranium declines, which indicates that the corrosion resistance of uranium is enhanced.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ion-surface interactions and analysis · Laser-induced spectroscopy and plasma · Laser Material Processing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Wilkinson · 1962 · 757
2. Studies of the kinetics and mechanism of the oxidation of uranium by dry and moist air A model for determining the oxidation rate over a wide range of temperatures and water vapour pressures10.1016/0022-3115(94)90200-3 ↗
3. Assessment of corrosion resistant coatings for a depleted U-0.75 Ti alloy10.1016/S0257-8972(89)80034-9 ↗
4. Evaluation of adhesion of some metallic coatings on a depleted U-0.75 Ti alloy10.1016/0257-8972(90)90091-P ↗
5. Assessment of corrosion-resistant coatings for a depleted uranium-0.75 titanium alloy10.1016/0257-8972(91)90126-H ↗
6. Adhesion and corrosion behavior of Al-Zn and TiN/Ti/TiN coatings on a DU-0.75wt.% Ti alloy10.1016/0257-8972(91)90037-W ↗
7. TiN, TiN gradient and Ti/TiN multi-layer protective coatings on Uranium10.1016/j.surfcoat.2006.09.126 ↗
8. Preferred orientation, phase transition and hardness for sputtered zirconium nitride films grown at different substrate biases10.1016/j.surfcoat.2010.10.060 ↗
9. Effect of substrate temperature and bias voltage on the crystallite orientation in RF magnetron sputtered AlN thin films10.1016/j.tsf.2005.12.145 ↗
10. The characterization of Zr–Si–N diffusion barrier films with different sputtering bias voltage10.1016/j.tsf.2004.04.037 ↗
11. Topographical evolution of sputtered chromium nitride thin films10.1016/j.tsf.2006.08.031 ↗
12. On the dependence on bias voltage of the structural evolution of magnetron-sputtered nanocrystalline Cu films during thermal annealing10.1016/j.tsf.2004.09.033 ↗
13. Influence of substrate bias voltage on the properties of magnetron sputtered Cu2O films10.1016/j.physb.2005.08.041 ↗
14. The effect of N and C implantation on uranium hydride nucleation and growth kinetics10.1016/S0925-8388(01)01537-7 ↗
15. Altering the hydriding behaviour of uranium metal by induced oxide penetration around carbo-nitride inclusions10.1016/j.ssi.2013.04.004 ↗
16. The effect of inclusions on the fracture of uranium10.1016/0022-3115(61)90003-4 ↗
17. The oxidative corrosion of carbide inclusions at the surface of uranium metal during exposure to water vapour10.1016/j.jhazmat.2011.08.011 ↗
18. Characterisation and corrosion performance of laser-melted 3CR12 steel10.1016/j.apsusc.2005.01.136 ↗
19. Yongbin Zhang a Pulsed laser nitriding of uranium10.1016/j.jnucmat.2009.12.002 ↗
20. Selective surface purification via crater eruption under pulsed electron beam irradiation10.1063/1.2234306 ↗
21. Temperature profile and crater formation induced in high-current pulsed electron beam processing10.1116/1.1619417 ↗
22. On the topographic and energetic surface modifications induced by laser treatment of metallic substrates before plasma spraying10.1016/S0169-4332(02)01079-6 ↗
23. Laser induced periodic surface structures on iron10.1016/0169-4332(95)00495-5 ↗
24. Finite element simulation of temperature field of laser reactive cladding carbide ceramic coating
25. A review of mixing processes in Ta/Fe and Mo/Fe systems treated by high current electron beams10.1016/S0168-583X(98)00417-0 ↗
26. Surface treatment by high current pulsed electron beam10.1016/S0257-8972(02)00657-6 ↗
27. From crater eruption to surface purification of raw silicon:A treatment by pulsed electron beam10.1016/j.apsusc.2014.05.076 ↗
28. Li · 2002
29. Numerical simulation of two-dimensional quasi-steady-state flow field and temperature field in laser cladding pool
30. Numerical simulation of temperature field of continuously moving three-dimensional transient laser molten pool
31. Pulsed electron-beam technology for surface modification of metallic materials10.1116/1.581369 ↗
32. Pulsed electron-beam technology for surface modification of metallic materials10.1116/1.581369 ↗