The effect of hyper-rotation on the Weibull distribution of tensile properties in a friction stirred AA7075 aluminum alloy
Source abstract
Abstract
Abstract In this study, the effect of tool rotational speed (1230, 1450 and 1670 rpm) on the tensile properties of AA7075-T6 aluminum alloy was investigated after natural aging. The total elongation (TE) of friction stir welding (FSW) specimens was analyzed by Weibull statistics. The TE of 1230R specimens was remarkably higher and more concentrated, while that of 1670R specimens was concentrated but severely deteriorated (2–6.7%, not conducing to applications). Hence, the 1670R specimens were not subjected to Weibull analysis. It is noteworthy that 1450R specimens had larger fluctuations than the others in TE. In addition, the TE distribution of 1230R specimens in this experiment was from 18 to 25% and that of 1450R specimen was from 3 to 24%. The Weibull modulus m for 1230R and 1450R specimens were 3.07 and 0.66, respectively. Thus, 1230R specimens should be considered more reliable in engineering applications. In addition, the microstructures and the EPMA analysis of 1450R specimens confirmed that different fracture behaviors (ductility and embrittlement) were affected by the distribution of the elements, precipitates and metal flow zones. As a result, the TE of 1450R specimens had a large fluctuation range, which decreases reliability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. Prog. Application of modern aluminum alloys to aircraft10.1016/0376-0421(95)00004-6 ↗
2. Advanced aluminum and hybrid aerostructures for future aircraft10.4028/www.scientific.net/MSF.519-521.1233 ↗
3. Trends in aluminium alloy development and their joining methods
4. Design and analysis of lightweight Automotive component for turbocharger units
5. Thomas · 1991
6. Superplastic deformation behaviour of friction stir processed 7075Al alloy10.1016/S1359-6454(02)00278-1 ↗
7. High strain rate superplasticity in a friction stir processed 7075 Al alloy10.1016/S1359-6462(99)00329-2 ↗
8. Structural response of superaustenitic stainless steel to friction stir welding10.1016/j.actamat.2011.05.021 ↗
9. Friction stir welding of aluminum alloys10.1179/174328009X411136 ↗
10. Fine-grain evolution in friction-stir processed 7050 aluminum10.1016/S1359-6462(03)00082-4 ↗
11. Continuous dynamic recrystallization during friction stir welding of high strength aluminum alloys10.1016/S1359-6462(00)00480-2 ↗
12. Microstructural modification and ductility enhancement of surfaces modified by FSP in aluminium alloys10.1016/j.msea.2009.01.008 ↗
13. Ductility improvement of an AZ61 Magnesium alloy through two-pass submerged friction stir processing10.3390/ma10030253 ↗
14. Lowering the temperature for high strain rate superplasticity in an Al-Mg-Zn-Cu alloy via cooled friction stir processing10.1016/j.matchemphys.2013.06.055 ↗
15. O'Connor · 1991
16. Kapur · 1977
17. A statistical distribution function of wide applicability10.1115/1.4010337 ↗
18. Courtney · 2005
19. Rotating bending fatigue microscopic fracture characteristics and life prediction of 7075-T7351 Al alloy10.3390/met8040210 ↗
20. Statistical aspects of fatigue crack growth life of base metal, weld metal and heat affected zone in FSWed 7075-T651 aluminum alloy10.1007/s12206-014-0906-8 ↗
21. Fatigue life assessment of friction spot welded 7050-T76 aluminium alloy using Weibull distribution10.1016/j.ijfatigue.2016.02.030 ↗
22. Fatigue assessment of refill friction stir spot weld in AA2024‐T3 similar joints10.1111/ffe.12764 ↗
23. Weibull statistics of tensile-shear strength of 5083 aluminum alloy after friction stir spot welding10.2320/matertrans.M2014281 ↗
24. Cater · 1986
25. Dai · 1992 · 353
26. On the determination of Weibull parameters10.1007/BF00722337 ↗
27. Abernethy · 2000
28. Weibull statistics for evaluating failure behaviors and joining reliability of friction stir spot welded 5052 aluminum alloy10.2320/matertrans.MRA2008341 ↗
29. Optimized HVOF titania coatings10.1361/105996303770348230 ↗
30. Embrittlement mechanism on tensile fracture of 7075 Al alloy with friction stir process (FSP)10.2320/matertrans.M2010315 ↗