Employing a 100 °C-dried mixture that contained KMnO 4 and SnCl 4 as an anode material for lithium ion batteries
Source abstract
Abstract
Abstract A novel finding, that the 100 °C-dried mixtures that contained KMnO4 and SnCl4 can be employed as anode materials for lithium ion batteries (LIBs), was reported for the first time in this work. In this work, the samples with Mn to Sn atomic ratios of 2:1, 1:1, 0.5:1 and 0:1 were respectively nominated as sample a, b, c and d. The physicochemical properties of the synthesized materials were mainly examined by using X-ray diffraction (XRD) and scanning electron microscopy (SEM). XRD results revealed that the main diffraction peaks assigned to KMnO4 were displayed in sample a and b, and some novel diffraction peaks were exhibited by sample c, and no typical diffraction peaks were displayed by sample d. The presence of irregular particles with no particular morphologies in all prepared samples was demonstrated by the SEM images. The electrochemical performances of the prepared samples were chiefly studied using galvanostatic charge-discharge tests, cyclic voltammometry (CV) and electrochemical impedance spectroscopy (EIS). The consequences of the electrochemical measurements indicated that sample c delivered a specific capacity of 225 mAh g−1 at 100 mA g−1 after 20 cycles, and also, at the current density of 700 mA g−1, the discharge capacity of sample c was still maintained as high as 130 mAh g−1 after 10 cycles. A novel group of anode material, i.e., the dried mixtures that contained KMnO4 and SnCl4, was developed in this work, which was very beneficial to the further development of LIBs anode materials mainly because of the rather lower preparation cost and the very simple preparation process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. On the oxidation state of manganese ions in Li-ion battery electrolyte solutions10.1021/jacs.6b10781 ↗
2. In situ atomic-scale observation of electrochemical delithiation induced structure evolution of LiCoO2 cathode in a working all-solid-state battery10.1021/jacs.6b13344 ↗
3. LiFeP: a new anode material for lithium ion batteries10.1016/j.jpowsour.2017.09.005 ↗
4. Hierarchical Ti-Nb oxide microspheres with synergic multiphase structure as ultra-long-life anode materials for lithium-ion batteries10.1016/j.jpowsour.2017.09.061 ↗
5. Porous silicon in carbon cages as high-performance lithium-ion battery anode materials10.1016/j.electacta.2017.08.038 ↗
6. Preparation and electrochemical performance of Ti2Nb10O29/Ag composite as anode materials for lithium ion batteries10.1016/j.electacta.2017.09.072 ↗
7. Synthesis of embossing Si nanomesh and its application as an anode for lithium ion batteries10.1016/j.jpowsour.2017.07.048 ↗
8. One-pot chemical route for morphology-controllable fabrication of Sn-Sb micro/nano-structures: advanced anode materials for lithium and sodium storage10.1016/j.jpowsour.2017.01.016 ↗
9. Amorphous Fe2O3 nanoshells coated on carbonized bacterial cellulose nanofibers as a flexible anode for high-performance lithium ion batteries10.1016/j.jpowsour.2016.01.026 ↗
10. Fabrication of hierarchically branched SnO2 nanowires by two-step deposition method and their applications to electrocatalyst support and Li ion electrode10.1016/j.jpowsour.2017.09.045 ↗
11. Enhanced rate performance of Li4Ti5O12 anodes with bridged grain boundaries10.1016/j.jpowsour.2017.04.032 ↗
12. A novel approach to facilely synthesize mesoporous ZnFe2O4 nanorods for lithium ion batteries10.1016/j.jpowsour.2015.12.102 ↗
13. Synthesis and research of egg shell-yolk NiO/C porous composites as lithium-ion battery anode material10.1016/j.electacta.2017.06.039 ↗
14. Lithium dual uptake anode materials: crystalline Fe3O4 nanoparticles supported over graphite for lithium-ion batteries10.1016/j.electacta.2017.10.034 ↗
15. Fast facile synthesis of SnO2/graphene composite assisted by microwave as anode material for lithium-ion batteries10.1016/j.electacta.2017.06.111 ↗
16. Fluorine-doped SnO2 nanoparticles anchored on reduced graphene oxide as a high-performance lithium ion battery anode10.1016/j.jpowsour.2017.07.024 ↗
17. SnO2/graphene composite as highly reversible anode materials for lithium ion batteries10.1016/j.jpowsour.2013.03.116 ↗
18. Influence of Sn content on microstructure and electrochemical properties of Sn-NiTi film anodes in lithium ion batteries10.1016/j.jpowsour.2012.11.085 ↗
19. Potassium Permanganate (KMnO4) can be employed as anode material for lithium ion batteries10.20964/2017.06.62 ↗
20. Using potassium ferricyanide as a dopant to prepare K and Fe co-doped Li4Ti5O1210.1016/j.ceramint.2016.09.082 ↗
21. Pd oxides/hydrous oxides as highly efficient catalyst for formic acid electrooxidation10.1016/j.jpowsour.2013.10.085 ↗
22. Synthesis of g-C3N4 nanosheets decorated flower-like tin oxide composites and their improved ethanol gas sensing properties10.1016/j.jallcom.2017.09.073 ↗
23. Electrocatalytic activity of multi-walled carbon nanotubes-supported PtxPdy catalysts prepared by a pyrolysis process toward ethanol oxidation reaction10.1016/j.electacta.2013.02.130 ↗
24. Octagonal prism shaped lithium iron phosphate composite particles as positive electrode materials for rechargeable lithium-ion battery10.1016/j.electacta.2014.08.141 ↗
25. Characterization of adhesion of copper to poly(tetrafluoroethylene)10.1023/A:1006646117539 ↗
26. The influence of SnCl4 doping on the electrochemical performance of spinel lithium titanate (Li4Ti5O12) anode material10.1016/S1452-3981(23)11065-0 ↗
27. Uniformly electrodeposited a -MnO2 film on super-aligned electrospun carbon nanofibers for a bifunctional catalyst design in oxygen reduction reaction10.1016/j.electacta.2017.10.057 ↗
28. Synthesis and characterization of nanocrystalline tin sulfide (SnS) with SnO2 nanoislands flakes10.1016/j.jallcom.2017.08.020 ↗
29. Surface composition of ordered intermetallic compounds PtBi and PtPb10.1016/j.susc.2006.04.014 ↗
30. Dehydrogenation of propane to propene over different polymorphs of gallium oxide10.1016/j.jcat.2005.03.001 ↗
31. Fast facile synthesis of SnO2/Graphene composite assisted by microwave as anode material for lithium-ion batteries10.1016/j.electacta.2017.06.111 ↗
32. Preparation and characterization of dy-doped lithium titanate (Li4Ti5O12)10.1016/S1452-3981(23)15856-1 ↗
33. Improving the high rate performance of Li4Ti5O12 through divalent zinc substitution10.1016/j.jpowsour.2012.04.080 ↗
34. Li4Ti5O12 composited with Li2ZrO3 revealing simultaneously meliorated ionic and electronic conductivities as high performance anode materials for Li-ion batteries10.1016/j.jpowsour.2017.04.028 ↗
35. A novel material Li2NiFe2O4: preparation and performance as anode of lithium ion battery10.1016/j.matchemphys.2016.03.030 ↗
36. Accelerated electron-transfer reaction of the O2/O2- redox couple on multi-walled carbon nanotubes-modified edge-plane pyrolytic graphite electrode in room-temperature ionic liquids10.5796/electrochemistry.75.35 ↗
37. A facile electrode preparation method for accurate electrochemical measurements of double-side-coated electrode from commercial Li-ion batteries10.1016/j.jpowsour.2018.02.070 ↗
38. A novel composite anode material of Si-SnO2 –graphene prepared in air for lithium ion batteries10.20964/2017.12.30 ↗
39. Can the calcined weathered stones be employed as anode materials for lithium ion batteries?10.14447/jnmes.v20i4.451 ↗
40. Li4Ti5O12 modified with Ag nanoparticles as an advanced anode material in lithium-ion batteries10.1016/j.jpowsour.2013.07.048 ↗
41. Improving the high rate performance of Li4Ti5O12 through divalent zinc substitution10.1016/j.jpowsour.2012.04.080 ↗