Synthesis and properties of Co-carbon nanocomposites using synthetic fulvic acids
Source abstract
Abstract
Abstract New simple, rapid, cheap and effective method for preparation of magnetic carbon encapsulated Co nanoparticles by catalytic carbonization of cobalt(II) fulvate is presented. The ≿obalt(II) fulvate being obtained by precipitation of synthetic fulvic acid by Co(NO3)2 was used both as the metal containing precursor and as a source of carbon. The structure and composition of the products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), voltamperometry, and elemental analysis. The nanocomposites have high content of cobalt (44%) and possess very high saturation magnetization (Ms = 162.5 emu/g) and low coercivity (Hc = 0.018 KOe). The treatment of the obtained nanocomposite by the hot concentrated nitric acid results in a complete dissolution of the metal. The TEM study of the received graphite like phase has shown the presence in the composition of the elongated structures that can be carbon nanotubes with lots of layers or carbon nanofibers. The porous structure of nanocomposite and the graphite like phase were investigated using the nitrogen volumetric adsorption.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Carbon Nanotubes in Composites · Graphene research and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Reduction of p-nitrophenol by magnetic Co-carbon composites derived from metal organic frameworks10.1016/j.cej.2016.04.029 ↗
2. Magnetic nanoparticles: synthesis, protection, functionalization, and application10.1002/anie.200602866 ↗
3. Cobalt nanoparticles coated with graphitic shells as localized radio frequency absorbers for cancer therapy10.1088/0957-4484/19/43/435102 ↗
4. Preparation of mesoscale hollow spheres of TiO2 and SnO2 by templating against crystalline arrays of polystyrene beads10.1002/(SICI)1521-4095(200002)12:3<206::AID-ADMA206>3.0.CO;2-5 ↗
5. N-doped cobalt-carbon composite for reduction of p-nitrophenol and pendimethaline10.1016/j.jallcom.2017.01.326 ↗
6. Efficient and selective aerobic oxidation of alcohols catalysed by MOF-derived Co catalysts10.1039/C5GC02082D ↗
7. Magnetic properties of cobalt and cobalt-platinum nanocrystals investigated by magneto-optical Kerr effect10.1063/1.1686906 ↗
8. Exchange bias and coercivity in oxygen exposed cobalt clusters10.1063/1.1649818 ↗
9. Strong exchange bias by a single layer of independent antiferromagnetic grains: the CoO/Co model system10.1103/PhysRevB.63.052401 ↗
10. Effects of surfactants on the particle morphology and self-organization of Co nanocrystals10.1016/j.msec.2003.09.165 ↗
11. CCVD synthesis and characterization of cobalt-encapsulated nanoparticles10.1021/cm011287h ↗
12. Structural and magnetic properties of oxidatively stable cobalt nanoparticles encapsulated in graphite shells10.1021/cm051346h ↗
13. Microstructure evolution, magnetic domain structures, and magnetic properties of Co–C nanocomposite films prepared by pulsed-filtered vacuum arc deposition10.1063/1.1305557 ↗
14. Relation between metal electronic-structure and morphology of metal-compounds inside carbon nanotubes10.1038/372761a0 ↗
15. Magnetic and porous nanospheres from ultrasonic spray pyrolysis10.1021/ja050693p ↗
16. Ordered nanoporous arrays of carbon supporting high dispersions of platinum nanoparticles10.1038/35084046 ↗
17. Synthesis of mesoporous magnetic Co-NPs/carbon nanocomposites and their adsorption property for methyl orange from aqueous solution10.1016/j.jcis.2012.08.022 ↗
18. Synthesis and properties of synthetic analogs of natural humic acids10.1134/S1070427212020243 ↗
19. Synthesis and properties of synthetic fulvic acid derived from hematoxylin10.1016/j.molstruc.2014.12.091 ↗
20. Quantum-chemical simulation of the synthesis of structural fragments of humic analogs10.1134/S1070363214050119 ↗
21. Preparation, texture, and magnetic properties of carbon nanotubes/nanoparticles doped with cobalt10.1021/jp013320t ↗
22. Gregg · 1982
23. An improved method for the calculation of pore size distribution from adsorption data10.1002/jctb.5010140302 ↗
24. Method for calculation of effective pore size distribution in molecular sieve carbon10.1252/jcej.16.470 ↗
25. Excess surface work – a modelless way of getting surface energies and specific surface areas directly from sorption isotherms10.1016/j.apsusc.2006.12.089 ↗
26. Comments on the limits of applicability of the mechanism of capillary condensation10.1016/0021-9797(69)90049-6 ↗