journal article·2017-01

Evaluation of process influences on surface chemistry of epoxy acrylate based solder mask via XPS, ToF-SIMS and contact angle measurement

Caroline Hofmeister, Sebastian Maaß, Thorsten Fladung, Bernd Mayer

Publisher page

Abstract

Abstract Epoxy acrylate based solder mask formulations were conditioned by different printed circuit board (PCB) manufacturing and PCB assembly process stages. Depending on these different influences the chemistry of the solder mask surface was investigated regarding adhesion to possible adhesion partners. The combination of X-ray photoelectron spectrometry (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS) and the contact angle method, for surface energy determination, provided a detailed understanding of the surface near region up to the topmost monolayer, which forms the contact zone in which adhesion takes place. The combination of ToF-SIMS and XPS provided molecular information of surface components comprising quantitative information. The influences of all process steps, like UV, chemical and thermal treatment, on the chemical surface composition and appearance were identified. Based on the results a chemical surface model could be created regarding the different adhesion mechanisms. It has been shown that an enrichment of siloxanes at the surface is generated by different mechanisms that were distinguished based on ToF-SIMS. Even though an oxidation process in the surface near region (10 nm) was indicated by XPS, no increase of the surface polar groups and thus no polarity increase could be observed within the first monolayer. A surface model derived from the analysis results shows generation and occupation of free sites at the surface through all stages of the process. An occupation of free sites by siloxanes from additives in the solder mask formulation results in a siloxane dominated topmost monolayer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ion-surface interactions and analysis · Surface Modification and Superhydrophobicity · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. IPC-HDBK-840 · 2006
2. UV- and thermal-curing behaviors of dual-curable adhesives based on epoxy acrylate oligomers10.1016/j.ijadhadh.2009.02.001 ↗
3. Rabek · 1995
4. Photo-oxidation of polymers—III: molecular weight changes in the photolysis and photo-oxidation of polystyrene10.1016/0014-3057(78)90037-X ↗
5. Analysis of nonvolatile oxidation products of polypropylene. II. Process degradation10.1002/pol.1970.150080519 ↗
6. Photoinduced chemical crosslinking activity and photo-oxidative stability of amine acrylates: photochemical and spectroscopic study10.1016/S0141-3910(01)00079-9 ↗
7. Yousif
8. Study of immersion silver and tin printed-circuit-board surface finishes in lead-free solder applications10.1007/s11664-004-0025-x ↗
9. The evolution of organic solderability preservative (OSP) process in PCB application
10. Thermal analysis of polydimethylsiloxanes. I. Thermal degradation in controlled atmospheres10.1002/pol.1969.160070308 ↗
11. Thermal and mechanical properties of epoxy acrylate/methacrylates UV cured coatings10.1016/j.porgcoat.2004.12.007 ↗
12. Briggs · 1983
13. Vickerman · 2001
14. Chemical analysis of inorganic and organic surfaces and thin films by static time-of-flight secondary ion mass spectrometry (TOF-SIMS)10.1002/anie.199410231 ↗
15. Surface energy, surface topography and adhesion10.1016/S0143-7496(03)00068-X ↗
16. On adhesives and adhesive action10.1021/j150248a008 ↗
17. An overview of the basic aspects of polymer adhesion
18. Role of acid-base interfacial bonding in adhesion10.1163/156856187X00049 ↗
19. Theory given direction to adhesion work: new theory is based on surface energetics, helps predict what constitutes a good adhesive
20. Voyutskii · 1963
21. Causes of poor adhesion: weak boundary layers10.1021/ie51403a010 ↗
23. Migration and segregation phenomena of a silicone additive in a multilayer organic coating10.1016/j.porgcoat.2005.04.007 ↗
24. Delamination from process induced sources
25. Oxidation kinetics of thin copper films and wetting behaviour of copper and Organic Solderability Preservatives (OSP) with lead-free solder10.1016/j.apsusc.2011.02.048 ↗
26. Hetschel · 2009
27. Manual of contact angle measurement systems Kruess GmbH.131.
28. Interactions and structure of poly(dimethylsiloxane) at silicon dioxide surfaces: electronic structure and molecular dynamics studies10.1063/1.1545091 ↗
29. Vickerman · 1999 · vol. 2
30. Influence of copper layer on epoxy acrylate based solder mask surface chemistry and the effect on epoxy adhesion10.1186/s40563-015-0040-6 ↗
31. Photo-oxidation of polydimethylsiloxane oils Part III—effect of dimethylene groups10.1016/0141-3910(93)90223-6 ↗
32. Photo-oxidation of polydimethylsiloxane oils: Part I—Effect of silicon hydride groups10.1016/0141-3910(92)90155-X ↗
34. Surface molecular characterisation of different epoxy resin composites subjected to UV accelerated degradation using XPS and ToF-SIMS10.1016/j.polymdegradstab.2009.01.001 ↗
35. Hydrophobic recovery of vacuum ultraviolet irradiated polyolefin surfaces10.1002/ppap.200400020 ↗
36. Adhesion and reliability of anisotropic conductive films (ACFs) joints on organic solderability preservatives (OSPs) metal surface finish10.1007/s11664-008-0397-4 ↗
37. Wettability effects of immersion tin final finishes with lead free solder
38. Witold Paw · 2007 · 10
39. Beamson · 1992
40. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
41. Andrade · 1985
42. Morra · J. Colloid Interface Sci. · 1989 · 132 · 47510.1016/0021-9797(89)90264-6 ↗
43. Packham · 2006