journal article·2016-07

Mechanical behaviour of nanolayer hydroxyapatite (HA) coating developed through superplastic embedment of titanium (Ti) alloy (Ti 6Al 4V)

Hidayah Mohd Khalid, Siti Nur Hasan, Iswadi Jauhari

Publisher page

Abstract

Abstract Ti 6Al 4V is superplastically embedded with HA powder after being submitted to a heat treatment process designed to produce an HA embedded layer with improved strength and good biocompatibility. The surface properties of the produced HA embedded layer, having 249 nm thickness and 660 HV hardness, have been studied and correlated according to their biological and mechanical behaviour in vitro. A scratch test comprising two maximum applied scratch loads of 100 mN and 500 mN has been performed. This was carried out in order to reveal the degree of adherence between the surface layer and substrate both before and after immersion in a simulated body fluid (SBF) for 1, 3, 7, 14, 21, 28 and 35 days, respectively. The results obtained demonstrate that the HA embedded layer is sufficiently intact to the substrate, and that its stability is maintained even after immersion in SBF for a period of 35 days. Further, the newly grown HA layer starts to develop in the early stages of immersion through precipitation of the HA particles. It later becomes thicker upon the relevant immersion duration, which suggests that its biocompatibility remains sound.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Orthopaedic implants and arthroplasty · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Strain rate sensitivity of hydroxyapatite coatings10.1016/j.tsf.2011.06.004 ↗
2. Nanomechanical properties of surface-modified titanium alloys for biomedical applications10.1016/j.actbio.2008.04.009 ↗
3. High temperature deformation of Ti alloy superplastically embedded with HA10.1016/j.msea.2011.11.027 ↗
4. Implantation of HA into superplastic Ti–6Al–4V: kinetics and mechanical behaviors of implanted layer10.1007/s11661-010-0504-z ↗
5. Selection of the implant and coating materials for optimized performance by means of nanoindentation10.1016/j.actbio.2010.09.023 ↗
6. Hydroxyapatite coatings on titanium prepared by electrodeposition in a modified simulated body fluid10.1016/S1004-9541(08)60261-X ↗
7. An investigation of the effects of hydroxyapatite coatings on the fixation strength of cortical screws10.1016/j.medengphy.2004.10.006 ↗
8. In vitro studies of plasma-sprayed hydroxyapatite/Ti–6Al–4V composite coatings in simulated body fluid (SBF)10.1016/S0142-9612(02)00573-2 ↗
9. Loss of hydroxyapatite coating on retrieved, total hip components10.1016/S0883-5403(06)80037-9 ↗
10. Experimental coating defects in hydroxylapatite-coated implants
11. Deposition of layered bioceramic hydroxyapatite/TiO2 coatings on titanium alloys using a hybrid technique of micro-arc oxidation and electrophoresis10.1016/S0257-8972(99)00612-X ↗
12. Osseointegration of sintered porous-surfaced and plasma spray-coated implants: an animal model study of early postimplantation healing response and mechanical stability10.1002/(SICI)1097-4636(199911)47:2<127::AID-JBM3>3.0.CO;2-C ↗
13. Embedment of HA/Ti composite on superplastic titanium alloy (Ti–6Al–4V)10.1016/j.msea.2010.05.064 ↗
14. The osteogenic effect of electrosprayed nanoscale collagen/calcium phosphate coatings on titanium10.1016/j.biomaterials.2009.11.114 ↗
15. On the tribology and micro-drilling performance of TiN/AlN nanolayer coatings10.1016/S0921-5093(04)00919-0 ↗
16. Development of nanolayer hydroxyapatite (HA) on titanium alloy via superplastic deformation method10.1007/s11661-012-1185-6 ↗
17. Mechanical properties of calcium phosphate coatings deposited by laser ablation10.1016/S0142-9612(99)00240-9 ↗
19. Solutions able to reproduce in vivo surface-structure changes in bioactive glass-ceramic A-W310.1002/jbm.820240607 ↗
20. Bioactive glass ceramics: properties and applications10.1016/0142-9612(91)90194-F ↗
21. Mittal · 1995
22. Adhesion failure behavior of sputtered calcium phosphate thin film coatings evaluated using microscratch testing10.1016/j.jmbbm.2010.01.002 ↗
23. A review of adhesion test methods for thin hard coatings10.1116/1.573616 ↗
24. A review of the methods for the measurement of coating-substrate adhesion10.1016/0257-8972(88)90181-8 ↗
25. Surface modification of laser-processed porous titanium for load-bearing implants10.1016/j.scriptamat.2008.06.018 ↗