Effects of gamma ray and sub-cracks on ethanol-assisted crack healing in poly(methyl methacrylate)
Source abstract
Abstract
Abstract The effects of gamma ray and sub-cracks on ethanol-assisted crack healing in poly(methyl methacrylate) (PMMA) were investigated. The transport of ethanol in the gamma-irradiated PMMA was analyzed, using the Harmon model. Both the cracked-gamma-irradiated PMMA and the cracked PMMA with sub-cracks were ethanol-treated at a temperature above the effective glass transition point of the corresponding bulk PMMA. The crack closure rate, which followed the modified Arrhenius equation, increased with increasing gamma ray dose at a given temperature. The fracture strength of the healed PMMA increased with increasing gamma ray dose for short healing time at a given healing temperature, while long healing time led to the decrease of the fracture strength of the healed PMMA with increasing gamma ray dose. The fracture strength of the healed PMMA increased with increasing number of sub-cracks. These results provide the potential to develop self-healing polymeric materials in which structural damage can activate an autonomous healing process without any external stimuli.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer composites and self-healing · Microbial Applications in Construction Materials · Flame retardant materials and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Self-healing of unentangled polymer networks with reversible bond10.1021/ma401111n ↗
2. Self-repairing materials systems ─ a dream or a reality?
3. Innovations in acrylic bone cement and application equipment10.1002/jab.770060111 ↗
4. Fatigue failure in the cement mantle of an artificial hip joint10.1016/0267-6605(93)90056-D ↗
5. Microstructural pathway of fracture in poly(methyl methacrylate) bone cement10.1016/0142-9612(93)90162-U ↗
6. Studies of the mechanical and thermal properties of cross-linked poly(methyl methacrylate-acrylic acid-allylmethacrylate)-modified bond cement10.1002/app.23239 ↗
7. Rubber-modified bone cement10.1007/BF01115765 ↗
8. Mechanical properties of acrylic bond cement contacting PMMA-SiO2 hybrid sol-gel material10.1002/(SICI)1097-4636(199722)38:2<143::AID-JBM9>3.0.CO;2-Q ↗
9. Tensile strength of wire-reinforced bone cement and twisted stainless-steel wire10.2106/00004623-197759030-00028 ↗
10. Self-healing biomaterials10.1002/jbm.a.32987 ↗
11. Encapsulation of solvent into halloysite nanotubes to promote sell-healing ability in polymers10.1080/09243046.2014.915116 ↗
12. Some recent results on crack healing of poly (methyl methacrylate)10.1016/j.engfracmech.2008.06.014 ↗
13. Thermally-induced crack healing in poly (methyl methacrylate)10.1557/JMR.2002.0199 ↗
14. Crack healing in poly (methyl methacrylate) induced by co-solvent of methanol and ethanol10.1016/S0032-3861(00)00407-9 ↗
15. Ethanol-induced crack healing in poly (methyl methacrylate)10.1002/polb.1994.090320709 ↗
16. Methanol-induced crack in poly (methyl methacrylate)10.1002/pen.760302109 ↗
17. Growth and healing of a surface crack in poly(methyl methacrylate) under case II diffusion of methanol10.1016/S0032-3861(97)00153-5 ↗
18. Theory of crack healing in polymers10.1063/1.328526 ↗
19. A theory of healing at a polymer-polymer interface10.1021/ma00241a013 ↗
20. Wool · 1995
21. Voyutski · 1963 · vol. 4
22. Theory for the rate of crack closure10.1063/1.360654 ↗
23. Diffusion in glassy polymers10.1002/polc.5070120119 ↗
24. Crank · 1975
25. Windle · 1985 · 75
26. Diffusion with discontinuous swelling III. Type II diffusion as a particular solution of the conventional diffusion equation10.6028/jres.081A.013 ↗
27. Case II diffusion in polymers.I. Transient swelling10.1063/1.338287 ↗
28. Case II diffusion in polymers.II. Steady-state front motion10.1063/1.338288 ↗
29. Diffusion in glassy polymers. reexamination of vapor sorption data10.1021/ma60036a025 ↗
30. Diffusion in glassy polymers.II
31. Diffusion in glassy polymers.III
32. Diffusion in glassy polymers
33. Methanol transport in PMMA: the effect of mechanical deformation10.1002/pola.1987.080251204 ↗
34. Anisotroptic methanol transport in PMMA after mechanical deformation10.1016/0032-3861(88)90048-1 ↗
35. Effect of compression and thickness on acetone transport in polycarbonate10.1002/pen.20323 ↗
36. Transport kinetics of methanol in hydroxyethyl methacrylate homopolymer and its copolymer10.1557/JMR.2004.0443 ↗
37. Gamma irradiation of poly (methyl methacrylate) and polystyrene10.1021/j150548a001 ↗
38. Application of target theory for the radiation degradation of mechanical properties of polymer materials10.1007/BF00264107 ↗
39. Chain scission efficiency of some polymers in gamma-radiation
40. Thermal expansion of irradiated poly (methyl methacrylate)10.1016/0032-3861(87)90447-2 ↗
41. Hardness of irradiated poly (methyl methacrylate) at elevated temperatures10.1063/1.1388573 ↗
42. Transmittance in irradiated poly(methyl methacrylate) at elevated temperatures10.1063/1.1316792 ↗
43. ERR study of radical annihilation kinetics of γ-Ray-irradiated acrylic (PMMA) at elevated temperatures10.1016/j.polymer.2011.11.001 ↗
44. Solvent-induced stresses in glassy polymer: elastic model10.1557/JMR.1999.0555 ↗