Secondary Ion Mass Spectrometry based depth profiling of Mo/Si interfaces with different microcrystalline structure
Source abstract
Abstract
Abstract The issues pertaining to non-uniform sputtering from polycrystalline grains in metal thin films during Secondary Ion Mass Spectrometer depth profiling process are investigated. A case study on Mo thin films obtained through magnetron sputter deposition at different substrate temperatures and possessing different microstructural features is presented. X-ray diffraction, scanning electron microscopy, Rutherford backscattering spectrometry and atomic force microscopy were used to elucidate and corroborate the experimental observations of diffusion like broadening observed in the SIMS profiles. While the interfacial diffusion is ruled out based on the inferences derived from complementary experimental investigations, the observed broadening could be attributed to the influence of microstructural features on the sputtering process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ion-surface interactions and analysis · Electron and X-Ray Spectroscopy Techniques · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Sputter depth profile analysis of interfaces10.1088/0034-4885/61/7/002 ↗
2. Characterization of EUV periodic mutliayers10.1002/xrs.1350 ↗
3. Structural propertied of Al/Mo/SiC multilayers with high reflectivity for extreme ultraviolet light10.1364/OE.18.020019 ↗
4. Benninghoven · 1987
5. A comparative study of methods for thin-film and surface analysis10.1088/0034-4885/47/3/001 ↗
6. Influence of ion energy, incidence angle and surface roughness on depth resolution in AES sputter profiling of multilayer Cr/Ni thin films10.1016/S0168-583X(86)80105-7 ↗
7. Depth resolution of multilayer Cr/Ni thin film structures deposited on substrates with different roughness10.1016/0042-207X(87)90110-2 ↗
8. Influence of atomic mixing and preferential sputtering on depth profiles and interfaces10.1116/1.569883 ↗
9. On the SIMS depth profiling analysis: reduction of matrix effect10.1016/0168-1176(94)04113-L ↗
10. Ion bombardment effects on the near-surface composition during sputter profiling10.1002/sia.740120202 ↗
11. VLSI electronics 6
12. MoSi2 layer formation by ion implantation through metal technique10.1016/0042-207X(92)90266-Y ↗
13. Growth of molybdenum on silicon: structure and interface formation10.1103/PhysRevB.44.3854 ↗
14. Temperature-dependent nanocrystal formation in Mo/Si multilayers10.1103/PhysRevB.76.245404 ↗
15. Impurity effects in molybdenum silicide formation10.1016/0040-6090(82)90030-X ↗
16. Cullity · 1956
17. Auger electron spectroscopy depth profiling of Ni/Cr multilayers by sputtering with N2+ ions10.1016/0040-6090(79)90190-1 ↗
18. Yildirim Erbil · 2006
19. Investigations on Microstructure,Surface topography, and growth process of sputtered molybdenum showing texture turnover10.1002/1521-396X(199705)161:1<167::AID-PSSA167>3.0.CO;2-N ↗
20. Biaxial alignment in sputter deposited thin films10.1016/j.tsf.2006.06.027 ↗
21. Study of the structure and properties of thick vacuum condensates of nickel, titanium, tungsten, aluminium oxide and zirconium dioxide
22. High rate thick film growth10.1146/annurev.ms.07.080177.001323 ↗
23. Fundamental structure forming phenomena of polycrystalline films and the structure zone models10.1016/S0040-6090(97)00503-8 ↗
24. Mayer · 1997
25. The disilicides of tungsten, molybdenum, tantlum, titanium, cobalt and nickel, and platinum monosilicide: a survey of their thermodynamic properties10.1063/1.555922 ↗
26. Physico-chemical and X-ray optical characterizations of a Mo/Si multilayer interferential mirror upon annealing10.1016/j.susc.2005.05.058 ↗
27. Molybdenum disilicide formation by ion beam mixing and rapid thermal annealing of Mo/Si(111)10.1016/0040-6090(88)90175-7 ↗
28. Influence of P and as implantation of the formation of MoSi210.1063/1.335583 ↗
29. SIMS backside depth profiling of ultra shallow implants10.1016/S0169-4332(02)00671-2 ↗
30. SIMS analysis of HfSiO(N) thin films10.1016/j.apsusc.2006.02.099 ↗
31. TRIM calculation, http://www.srim.org/.
32. Wilson · 1989
33. Depth resolution in composition profiles by ion sputtering and surface analysis for single-layer and multilayer structures on real substrates10.1016/0040-6090(81)90488-0 ↗