journal article·2021-02

Towards a new promising dosimetric material from formation of thulium-yttria nanoparticles with EPR response

S.C. Santos, O. Rodrigues, L.L. Campos

Publisher page

Abstract

Abstract Advances toward new materials for dosimetry application is essential to enhance quality assurance and quality improvement practices based on radiation protection concept. Face to this challenge the present work reports an approach to produce thulium-yttria nanoparticles with electron paramagntic resonance response by an alternative hydrothermal synthesis based on a relative low temperature and pressure. Distinct compositions of thulium-yttria nanoparticles with up to 2 at.%Tm (at.%, atomic percentage) were prepared and characterized by XRD, SEM, PCS, and EPR. The proposed synthesis method followed by thermal treatment of the precursor powder at 1100 °C for 2 h provided thulium-yttria nanoparticles with rounded shape, cubic C-type structure, and mean particle size (d50) less than 160 nm. Among all compositions formed, thulium-yttria nanoparticles prepared with 0.1%Tm presented the most remarkable EPR response. The production of fine thulium-yttria nanoparticles with EPR response supply meaningful parameters to advance in the formation of new dosimetry materials based on rare earths.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear materials and radiation effects · Nuclear Materials and Properties · Luminescence Properties of Advanced Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Reducing CO2 emissions in OECD countries: do renewable and nuclear energy matter?10.1016/j.pnucene.2020.103425 ↗
2. Radiation safety and environmental impact assessment of sludge TENORM waste produced from petroleum industry in Egypt10.1016/j.psep.2020.06.012 ↗
3. Radiation therapy for patients with locally advanced pancreatic cancer: evolving techniques and treatment strategies
4. Moreira · 2021 · 1
5. Structural, optical and dosimetric characterization of CaSO4:Tb, CaSO4:Tb, Ag and CaSO4:Tb,Ag(NP)10.1016/j.jlumin.2020.117286 ↗
6. Dosimetric properties of thermoluminescent pellets of CaSO4 doped with rare earths at low doses10.1016/j.radphyschem.2020.108704 ↗
7. Thermoluminescence studies of CaSO4:Dy,P,Si phosphor under X-ray irradiation10.1016/j.ceramint.2017.11.086 ↗
8. Comparative study of the TL response of LiF:Mg,Ti and CaSO4:Dy in the clinical electron beams dosimetry applied to total skin irradiation (TSEB) treatments10.1016/j.radphyschem.2018.05.025 ↗
9. Performance of TL and OSL techniques using CaSO4 and Al2O3 dosimeters for mean glandular dose (MGD) and entrance surface skin dose (ESD) determination in a digital mammographic unit as alternative dosimeters, Radiat
10. Thermoluminescence, photoluminescence and optically stimulated luminescence characteristics of CaSO4:Eu phosphor: experimental and density functional theory (DFT) investigations10.1016/j.jlumin.2020.117051 ↗
11. Comparison of thermo-luminescent detectors and X-ray vacuum detectors for measurement of X-ray yield from gold plasma produced by a sub-nanosecond Nd:glass laser10.1016/j.nima.2008.07.037 ↗
12. Photoluminescence measurements of LiF TL detectors10.1016/j.radmeas.2013.01.034 ↗
13. On LiF:Mg,Cu,P and LiF:Mg,Ti phosphors high & ultra-high dose features10.1016/j.radmeas.2014.02.002 ↗
14. Photon energy response of LiF:Mg,Ti (MTS) and LiF:Mg,Cu,P (MCP) thermoluminescent detectors: experimental measurements and microdosimetric modeling10.1016/j.radphyschem.2019.05.021 ↗
15. Mitigation of the proton-induced low temperature anomaly of LiF:Mg,Cu,P detectors using a post-irradiation pre-readout thermal protocol10.1016/j.radmeas.2019.106233 ↗
16. Fading study and readout optimization for routinely use of LiF:Mg,Ti thermoluminescent detectors for personal dosimetry10.1016/j.radmeas.2020.106342 ↗
17. Radio-photoluminescence of highly irradiated Lif:Mg,Ti and Lif:Mg,Cu,P detectors10.1016/j.radmeas.2014.05.013 ↗
18. Occupational Radiation Protection
19. Radiation Protection of the Public and the Environment
20. Radiation Protection and Safety of Radiation Sources · 2014
21. Hydrothermal Synthesis
22. A new approach to obtain calcium cobalt oxide by microwave-assisted hydrothermal synthesis10.1016/j.ceramint.2019.09.130 ↗
23. Investigating luminescence properties and energy transfer of Ca3(PO4)2: Dy3+/Eu3+ phosphor via hydrothermal synthesis10.1016/j.optmat.2020.110009 ↗
24. Surface engineered hollow hydroxyapatite microspheres: hydrothermal synthesis and growth mechanisms10.1016/j.solidstatesciences.2020.106301 ↗
25. The characterization of purified citrate-coated cerium oxide nanoparticles prepared via hydrothermal synthesis10.1016/j.apsusc.2020.147681 ↗
26. Cellulose nanofiber assisted hydrothermal synthesis of Ni-rich cathode materials with high binding particles for lithium-ion batteries10.1016/j.jallcom.2020.154571 ↗
27. Hydrothermal synthesis of TiO2 nanoflower deposited on bauxite hollow fibre membrane for boosting photocatalysis of bisphenol A10.1016/j.jwpe.2020.101504 ↗
28. Green hydrothermal synthesis of high aspect ratio wollastonite nanofibers: effects of reaction medium, temperature and time10.1016/j.ceramint.2020.06.025 ↗
29. Microwave-assisted hydrothermal synthesis of ceria (CeO2): microstructure, sinterability and electrical properties10.1016/j.ceramint.2020.06.021 ↗
30. W–Y2O3 composite nanopowders prepared by hydrothermal synthesis method: Co-deposition mechanism and low temperature sintering characteristics10.1016/j.jallcom.2019.153461 ↗
31. 2018
32. 2018
33. Near-infrared luminescence spectroscopy in yttrium oxide phosphor activated with Er3+, Li+ and Yb3+ ions for application in photovoltaic systems10.1016/j.jlumin.2020.117271 ↗
34. Synthesis of neodymium doped yttria nanopowders by microwave-assisted glycine combustion method and the powder characteristics10.1016/j.ceramint.2013.10.073 ↗
35. Preparation of yttria powders co-doped with Nd3+, and La3+ using EDTA gel processes for application in transparent ceramics10.1016/j.jeurceramsoc.2017.05.040 ↗
36. Highly transparent Nd-doped yttria ceramics fabricated by hot pressing with ZrO2 and La2O3 as sintering additives10.1016/j.jallcom.2018.05.304 ↗
37. Comparison of solidification temperatures of different rare earth sesquioxides; effect of atmosphere
38. Influence of particle size distribution and morphology on the properties of the powder feedstock as well as of AlSi10Mg parts produced by laser powder bed fusion (LPBF)
39. Flame synthesis of Y 2 O 3 :Eu nanophosphors using ethanol as precursor solvents10.1557/JMR.2005.0364 ↗
40. Territory, proximity, and spatiality: the geography of international conflict10.1111/j.1551-2916.2005.00506.x ↗
41. Optical studies and estimation of kinetic parameters for dysprosium activated yttrium oxide phosphors10.1016/j.ijleo.2018.02.015 ↗
42. Preparation and characterization of thulium doped yttrium oxide (Tm:Y2O3) powders10.1016/j.jallcom.2017.03.165 ↗
43. Up-conversion luminescence of hafnium, erbium, ytterbium and lithium co-doped yttrium oxide10.1016/j.optmat.2020.109923 ↗
44. Synthesis and characterisation of terbium activated yttrium tantalate phosphor10.1016/j.jallcom.2010.03.010 ↗
45. Luminescent and magnetic properties of cerium-doped yttrium aluminum garnet and yttrium iron garnet composites10.1016/j.ceramint.2019.02.023 ↗
46. The reactions of HfO2 with Y2O3, Ho2O3, Er2O3, Tm2 O3, Yb2O3 and Lu2O3 at high temperatures
47. Phase interaction in the system HfO2–Eu2O3
48. Analysis of Eu3+ emission from different sites in Lu2O310.1016/S0925-8388(02)00042-7 ↗
49. Chemical vapor synthesis and luminescence properties of nanocrystalline cubic Y2O3 : Eu10.1063/1.371177 ↗
50. Seed's morphology-induced core-shell composite particles by seeded emulsion polymerization for drug delivery10.1016/j.colsurfb.2020.111008 ↗
51. Using fractal dimension and shape factors to characterize the microcrystalline cellulose (MCC) particle morphology and powder flowability10.1016/j.powtec.2020.01.045 ↗
52. The influence of particle morphology on the structure and mechanical properties of films cast from hybrid latexes10.1016/j.porgcoat.2019.01.015 ↗
53. The role of particle morphology on concrete fracture behaviour: a meso-scale modelling approach10.1016/j.cemconres.2020.106096 ↗
54. Bio-prototyping of europium-yttria based rods for radiation dosimetry10.1016/j.matchemphys.2017.07.063 ↗