journal article·2021-01

The effect of polymeric surfactant content on the mechanical properties of Al/GNP nanocomposites

Mostafa Moradi, Aliasghar Abouchenari, Mohadeseh Pudine, Fariborz Sharifianjazi

Publisher page

Abstract

Abstract Graphene nanoplatelets (GNPs) are ideal reinforcements for improving the mechanical properties of aluminum-based matrices due to their outstanding properties. However, it essentially depends on their uniform dispersion in the matrix. In this study, the challenge of uniform dispersion of graphene was performed by functionalizing the non-covalent surface and sonication of GNPs applying non-ionic polymeric ethyl cellulose (EC) surfactant, in which a colloidal mixture was provided with Al powder and graphene, followed by sintering at 620 °C and consolidation. The density and mechanical properties of nanocomposite specimens were investigated and compared with a non-surfactant-assisted Al/GNP nanocomposite. The results showed that GNPs/Al specimen prepared by 1.5% (wt/vol) of surfactant and 0.5 wt% GNPs showed the highest hardness and reduced wear rate compared to non-surfactant-assisted Al/GNPs sample. Besides, the GNPs content was investigated and the optimum amount was found to be 0.5 wt%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · MXene and MAX Phase Materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Developing Al2O3-TiC in-situ nanocomposite by SHS and analyzingtheeffects of Al content and mechanical activation on microstructure
2. Synthesis and characterization of in situ Al-Al13Fe4-Al2O3-TiB2 nanocomposite powder by mechanical alloying and subsequent heat treatment10.1080/15533174.2013.768660 ↗
3. Effect of hot extrusion on wear properties of Al–15 wt.% Mg2Si in situ metal matrix composites10.1016/j.matdes.2013.07.084 ↗
4. Production methods of CNT-reinforced Al matrix composites: a review
5. Microstructure and mechanical properties of friction stir weld of dissimilar AZ31-O magnesium alloy to 6061-T6 aluminum alloy10.1016/S1003-6326(14)63194-0 ↗
6. Microstructural development during spark plasma sintering of ZrB2–SiC–Ti composite10.1016/j.ceramint.2018.07.011 ↗
7. Structural evaluation and mechanical properties of nanostructured Al/B4C composite fabricated by ARB process10.1016/j.compositesb.2012.04.069 ↗
8. Microwave and spark plasma sintering of carbon nanotube and graphene reinforced aluminum matrix composite10.1016/j.acme.2018.02.006 ↗
9. Manufacturing wear-resistant 10Ce-TZP/Al2O3 nanoparticle aluminum composite by powder metallurgy processing10.1080/10426914.2014.930954 ↗
10. Effect of SiO2 content on Y-TZP/Al2O3 ceramic-nanocomposite properties as potential dental applications10.1016/j.ceramint.2020.01.105 ↗
11. Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets10.1016/j.mser.2013.08.001 ↗
12. Developing (W, Ti) C-(Ni, Co) nanocomposite by SHS method
13. Synthesis and the surface resistivity of carbon black pigment on black silicone thermal control coating10.1080/15533174.2013.809751 ↗
14. Effect of sintering temperature on tribological behavior of Ce-TZP/Al2O3-aluminum nanocomposite10.1177/0021998314567010 ↗
15. Rao · 2013
16. Sharma · 2018
17. Effect of flake reinforcement on mechanical properties of AA 6061 nano composite with secondary nano platelet-Graphene processed through powder metallurgy
18. A review of carbon nanotube/TiO2 composite prepared via sol-gel method10.29252/jcc.1.1.1 ↗
19. Surfactant-decorated graphite nanoplatelets (GNPs) reinforced aluminum nanocomposites: sintering effects on hardness and wear10.1007/s12613-018-1618-3 ↗
20. Graphene reinforced metal and ceramic matrix composites: a review10.1080/09506608.2016.1219481 ↗
21. Cheriet · 2006 · 1
22. Miller · 2019 · 1
23. Synthesis and mechanical properties of Al matrix composites reinforced with few-layer graphene and graphene oxide10.1016/j.jallcom.2017.08.268 ↗
24. The effect of graphene network formation on the electrical, mechanical, and multifunctional properties of graphene/epoxy nanocomposites10.1016/j.compscitech.2018.10.036 ↗
25. Recycling graphene from supercapacitor electrodes as reinforcing filler for epoxy resins10.1007/s12649-017-0039-2 ↗
26. Preparation of high concentration graphene dispersion with low boiling point solvents10.1007/s11051-019-4459-8 ↗
27. Recent progress on the dispersion and the strengthening effect of carbon nanotubes and graphene-reinforced metal nanocomposites: a review10.1080/10408436.2016.1243089 ↗
28. Dispersion of graphene using surfactant mixtures: experimental and molecular dynamics simulation studies10.1016/j.apsusc.2018.09.042 ↗
29. Influence of surfactants on the electronic properties of liquid-phase exfoliated graphene10.1016/j.mseb.2019.01.003 ↗
30. The effect of MgF2 addition on the mechanical properties of hydroxyapatite synthesized via powder metallurgy10.29252/jcc.1.1.3 ↗
31. Sintering behaviors of carbon nanotubes—aluminum composite powders10.3390/met6090213 ↗
32. Carbon fiber reinforced metal matrix composites: fabrication processes and properties10.1016/j.compositesa.2016.10.032 ↗
33. Corrosion behavior and in-vitro bioactivity of porous Mg/Al2O3 and Mg/Si3N4 metal matrix composites fabricated using microwave sintering process10.1016/j.matchemphys.2019.01.007 ↗
34. Microwave sintering of aluminum-ZrB2 composite: focusing on microstructure and mechanical properties10.1590/1980-5373-MR-2015-0799 ↗
35. Reinforcement with graphene nanosheets in aluminum matrix composites10.1016/j.scriptamat.2012.01.012 ↗
36. Development of aluminum-based hybrid composites with graphite nanofibers/alumina short fibers: processing and characterization10.1177/0021998309353958 ↗
37. Graphene oxide and graphene nanosheet reinforced aluminium matrix composites: powder synthesis and prepared composite characteristics10.1016/j.matdes.2016.01.031 ↗
38. Processing of surface-treated boron carbide-reinforced aluminum matrix composites by liquid–metal stir-casting technique10.1177/0021998311401086 ↗
39. Production methods of ceramic-reinforced Al-Li matrix composites: A review
40. Enhanced mechanical properties of Al5083 alloy with graphene nanoplates prepared by ball milling and hot extrusion10.1016/j.msea.2016.01.076 ↗
41. Fabrication of homogeneously dispersed graphene/Al composites by solution mixing and powder metallurgy10.1007/s12613-018-1552-4 ↗
42. High-throughput production of pristine graphene in an aqueous dispersion assisted by non-ionic surfactants10.1016/j.carbon.2010.12.049 ↗
43. Reinforcing mechanism of graphene and graphene oxide sheets on cement-based materials10.1061/(ASCE)MT.1943-5533.0002649 ↗
44. Functionalization of graphene: covalent and non-covalent approaches, derivatives and applications10.1021/cr3000412 ↗
45. Processing of epoxy/graphene nanocomposites: effects of surfactants
46. Improved strength and ductility of magnesium with addition of aluminum and graphene nanoplatelets (Al+GNPs) using semi powder metallurgy method10.1016/j.jiec.2014.08.024 ↗
47. Tribological performance of self-lubricating aluminum matrix nanocomposites: role of graphene nanoplatelets
48. Influence of surfactant type on the dispersion state and properties of graphene nanoplatelets reinforced aluminium matrix nanocomposites10.1080/1536383X.2017.1362396 ↗
49. High concentration exfoliation of graphene in ethyl alcohol using block copolymer surfactant and its influence on properties of epoxy nanocomposites10.1080/1536383X.2017.1283616 ↗
50. Investigating the influence of surfactants on the stabilization of aqueous reduced graphene oxide dispersions and the characteristics of their composite films10.1016/j.carbon.2011.10.039 ↗
51. Interface evolution and superior tensile properties of multi-layer graphene reinforced pure Ti matrix composite10.1016/j.matdes.2017.12.016 ↗
52. Microstructure and thermal conductivity of Al–Graphene composites fabricated by powder metallurgy and hot rolling techniques10.1007/s40195-017-0579-2 ↗
53. A novel method for preparing and characterizing graphene nanoplatelets/aluminum nanocomposites10.1007/s12274-017-1779-9 ↗
54. Processing and characterization of graphene and multi-wall carbon nanotube-reinforced aluminium alloy AA2219 composites processed by ball milling and vacuum hot pressing
55. Development of Al- and Cu-based nanocomposites reinforced by graphene nanoplatelets: fabrication and characterization10.1007/s11706-017-0377-9 ↗
56. Tribological properties of aluminium alloy composites reinforced with multi-layer graphene—the influence of spark plasma texturing process10.3390/ma10080928 ↗
57. Effect of graphene addition and tribological performance of Al 6061/graphene flake composite, Tribology-Materials10.1080/17515831.2017.1329920 ↗
58. Low energy solution ball milling of graphene nanoplatelets (GNPs) reinforced aluminium nanocomposites and its mechanical properties10.1088/1757-899X/380/1/012009 ↗