journal article·2019-01

Design of ceramometal CuFeAlOx/CuFeAl composites and their catalytic potential for water gas shift reaction

S.F. Tikhov, T.P. Minyukova, K.R. Valeev, S.V. Cherepanova, A.N. Salanov, N.V. Shtertser, V.A. Sadykov

Publisher page

Abstract

Abstract Structural, textural-mechanical and catalytic properties of ceramometals synthesized from a powdered alloy with the atomic ratio Cu:Fe:Al = 45:22:33 were studied along with the regularities of their synthesis. The alloy was obtained by mechanochemical activation in a high-energy mill for 6–12 min. The resulting powder was subjected to hydrothermal treatment and calcined. The XRD and SEM study revealed that the cermets have the egg-shell microstructure with the metallic core containing mostly the phases of copper and aluminum intermetallics. The oxide shell contains copper oxide and spinel phases. The catalyst has a considerable (for porous solids) mechanical strength of 14–34 MPa, a developed macropore structure, and a satisfactory specific surface area of 10–23 m2/g. The specific activity of ceramometals was shown to change with the content of the Al4Cu9 intermetallic in the composites are discussed. Interrelation between possible atomic structure of active sites and their catalytic activity is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanoporous metals and alloys · Catalytic Processes in Materials Science · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Water gas shift Catalysis10.1080/01614940903048661 ↗
2. Design and preparation of high-surface-area Cu/ZnO/Al2O3 catalysts using a modified co-precipitation method for the water-gas shift reaction10.1016/j.apcata.2013.05.010 ↗
3. Influence of the preparation methods and redox properties of Cu/ZnO/Al2O3 catalysts for the water gas shift reaction10.1016/j.molcata.2009.10.028 ↗
4. Enhancement of water–gas shift reaction efficiency: catalysts and the catalyst bed arrangement10.1070/RC2010v079n11ABEH004160 ↗
5. The effect of the precursor ageing on properties of the Cu/ZnO/Al2O3 catalyst for low temperature water–gas shift (LT-WGS)10.1016/j.molcata.2014.05.003 ↗
6. Characterization and catalytic performance of copper-based WGS catalysts derived from copper ferrite10.1016/j.ijhydene.2014.02.018 ↗
7. Promoted Cu-Fe3O4 catalysts for low-temperature water gas shift reaction: optimization of Cu content10.1016/j.apcatb.2017.12.050 ↗
8. Promotion effect of FeOx addition on the catalytic activity of supported Cu catalysts for the water–gas shift reaction10.1007/s10562-008-9504-7 ↗
9. M. Effects of alkali promoters on the textural and catalytic properties of mesoporous Fe-Al-Cu catalysts for water gas shift reaction
10. Molybdenum carbide water–gas shift catalyst for fuel cell-powered vehicles applications10.1023/B:CATL.0000011079.20686.db ↗
11. A novel catalyst fabricated from Al–Cu–Fe quasicrystal for steam reforming of methanol10.1016/j.cattod.2005.11.003 ↗
12. Evolution of microstructure induced by calcination in leached Al–Cu–Fe quasicrystal and its effects on catalytic activity10.1007/s10853-010-5063-6 ↗
13. Design of micro-shell Cu–Al porous ceramometals as catalysts for the water–gas shift reaction10.1039/C7RA06672D ↗
14. Phase formation during high-energy ball milling of the33Al-45Cu-22Fe (at.%) powder mixture10.1016/j.jallcom.2017.11.100 ↗
15. Goldstein · 2003 · 690
16. Design of some oxide/metal composite supports and catalysts10.1163/156855409X450954 ↗
17. Performance of spinel ferrite catalysts integrated with mesoporous Al2O3 in the high temperature water– gas shift reaction10.1016/j.cej.2014.12.045 ↗
18. Temperature dependence of Cu–Al spinel formation and its catalytic performance in methanol steam reforming10.1039/C7CY01236E ↗
19. Structural and morphological characteristics of CuMe2O4 spinels in reductive atmosphere depending on the chemical nature of Mе(III) cations10.1016/j.materresbull.2017.11.034 ↗
20. Characterization and catalytic performance of copper-based WGS catalysts derived from copper ferrite10.1016/j.ijhydene.2014.02.018 ↗
21. Self-assembled porous nano-composite with high catalytic performance by reduction of tetragonal spinel CuFe2O410.1016/j.apcata.2009.12.035 ↗
22. The quantitative description of the effects of cesium doping on the activity and properties of Cu/ZnO/Al2O3 catalyst in low-temperature water–gas shift10.1016/j.apcata.2012.02.032 ↗
23. Enhanced stability of Cu clusters of low atomicity against oxidation. Effect on the catalytic redox process10.1021/acscatal.7b00778 ↗
24. Promoted Cu-Fe3O4 catalysts for low-temperature water gas shift reaction: optimization of Cu content
25. Synthesis and characterization studies of MgO:CuO nanocrystals by wet-chemical method10.1016/j.saa.2015.01.111 ↗
26. Synthesis and characterization of ZnO–CuO nanocomposites powder by modified perfume spray pyrolysis method and its antimicrobial investigation