Ni-V(or Cr) Co-addition Cu alloy films with high stability and low resistivity
Source abstract
Abstract
Abstract In order to inhibit Cu, interconnecting in ultra-large-scale integration, from diffusing with surrounding dielectric materials and enhance its chemical inertness and maintain its excellent electrical performance as well. In this paper, the stable solid solution cluster-plus-glue-atom model was used to design the composition of Cu seed layers. In this model, insoluble element V (or Cr) was dissolved in Cu via Ni which is soluble both with Cu and V(or Cr), causing a certain degree of lattice distortion to improve the stability of Cu film. Cu-Ni-V(or Cr) alloy films were deposited directly on single crystal Si(100) substrates, without a designated barrier layer, subsequently annealed in vacuum. For the (V0.8/12.8Ni12/12.8)0.5Cu99.5 (at.%) film with the addition of large atomic radius element V, it showed the minimum electrical resistivity of 3.2 μΩ·cm after 500 °C/1 h annealing; after 500 °C/40 h annealing, no diffusion between Cu and Si was observed and the resistivity remained stable. Likewise, the (Cr1.4/13.4Ni12/13.4)0.4Cu99.6 film also remained a minimum resistivity of 3.0 μΩ·cm after annealing at 500 °C for 40 h. The greater the relative lattice distortion is in a single system, the higher the stability and the lower resistivity achieved. Obviously, the stability of Cu alloy film which satisfy the requirements of the microelectronics industry can be improved dramatically by the additive of Ni and V (or Cr) conform to the proportion of clusters.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper Interconnects and Reliability · Semiconductor materials and interfaces · Nanoporous metals and alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Interfacial reactions of ultrahigh-vacuum-deposited Cu thin films on atomically cleaned (111)Si. I. Phase formation and interface structure10.1063/1.354205 ↗
2. Thermal stability of Cu(W) and Cu(Mo) films for advanced barrierless Cu metallization: effects of annealing time10.1007/s11664-006-0296-5 ↗
3. Cu films containing insoluble Ru and RuNx on barrierless Si for excellent property improvements10.1063/1.2790843 ↗
4. Future interconnect technologies and copper metallization
5. Alloying of copper for use in microelectronic metallization10.1016/0254-0584(95)01513-2 ↗
6. Characterization of microstructure, interfacial reaction and diffusion of immiscible Cu(Ta) alloy thin film on SiO2 at elevated temperature10.1149/1.1630597 ↗
7. Microstructure control of copper films by the addition of molybdenum in an advanced metallization process10.1007/BF02657730 ↗
8. Formation of Ti diffusion barrier layers in Thin Cu(Ti) alloy films10.1007/s11664-005-0070-0 ↗
9. Sputtered Cu films containing various insoluble substances for advanced barrierless metallization10.4028/www.scientific.net/MSF.539-543.3497 ↗
10. Self-forming barrier characteristics of Cu-V and Cu-Mn films for Cu interconnects10.1016/j.tsf.2013.04.052 ↗
11. Preparation of low resistivity Cu-1 at. %Cr thin films by magnetron sputtering10.1116/1.577774 ↗
12. Annealing behavior of Cu and dilute Cu-alloy films: precipitation, grain growth, and resistivity10.1063/1.1589593 ↗
13. The Preparation for Cu(Sn) films of barrierless interconnection10.4028/www.scientific.net/MSF.654-656.1744 ↗
14. Barrierless Cu-Ni-Nb thin films on silicon with high thermal stability and low electrical resistivity10.1557/jmr.2013.355 ↗
15. Thermal stability of barrierless Cu-Ni-Sn films10.1016/j.apsusc.2014.01.084 ↗
16. Barrierless Cu-Ni-Mo interconnect films with high thermal stability against silicide formation10.1007/s11664-012-2260-x ↗
17. Application of cluster-plus-glue-atom model to barrierless Cu-Ni-Ti and Cu-Ni-Ta films10.1116/1.4897616 ↗
18. Burger · 1977 · 370
19. Revelation of solid solubility limit Fe/Ni = 1/12 in corrosion resistant Cu-Ni alloys and relevant cluster model10.1557/JMR.2010.0041 ↗
20. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element10.2320/matertrans.46.2817 ↗
21. High-performance copper alloy films for barrierless metallization10.1016/j.apsusc.2010.07.032 ↗
22. Sputtered copper films with insoluble Mo for Cu metallization: a thermal annealing study10.1007/s11664-003-0017-2 ↗
23. Effects of UV curing on the self-forming barrier process of Cu-V alloy films10.1016/j.surfcoat.2015.06.049 ↗
24. Scanning transmission electron microscopy investigations of self-forming diffusion barrier formation in Cu(Mn) alloys on SiO210.1063/1.4822441 ↗
25. Diffusion barrier and electrical characteristics of a self-aligned MgO layer obtained from a Cu(Mg) alloy film10.1063/1.1314879 ↗
26. Electrical resistivity interpretation of ternary Cu-Ni-Mo alloys using a cluster-based short-range-order structural model10.1088/0022-3727/49/3/035306 ↗