journal article·2018-01

Microstructures and mechanical properties of TiB2-based composites with self-grown carbon nanotubes synthesized using Co catalysts

Jia Lin, Yihang Yang, Houan Zhang, Chenyan Wu, Naqiong Lin

Publisher page

Abstract

Abstract Carbon nanotubes (CNTs) were grown on TiB2 powder by chemical vapor deposition using a Co catalyst. Then, the bulk CNTs(Co)-TiB2 composite was consolidated from these in-situ synthesized powder by spark plasma sintering. Homogeneously-dispersed CNTs with herringbone-like structure composed of well-crystallized graphite were observed. The flexural strength and fracture toughness of the in-situ synthesized CNTs(Co)-TiB2 composite were determined to be 987 ± 42 MPa and 12.4 ± 0.5 MPa m1/2 respectively, which were much higher than those of monolithic TiB2 and TiB2-CNTs composites synthesized by traditional ball-milling and sintering. The improvement of the composite performance was ascribed to the hybrid effect of the fully dense structure of the composite, the appropriate interfacial strength between the CNTs and the matrix, and the higher strengthening ability of well-dispersed CNTs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Study of the influence of TiB2 particles on the melt structure of the hypoeutectic Al–Cu alloy by small angle X-ray scattering10.1016/j.matchemphys.2013.10.027 ↗
2. Reactive sintering and properties of TiB2 and TiC porous cermets10.1016/j.matlet.2007.08.020 ↗
3. Microstructure–mechanical properties relations in SiC–TiB2 composite10.1016/j.matchemphys.2012.01.007 ↗
4. Effect of sintering process on the microstructures and properties of in situ TiB2–TiC reinforced steel matrix composites produced by spark plasma sintering10.1016/j.jmatprotec.2009.08.008 ↗
5. Self-propagating high temperature combustion synthesis of TiC/TiB2 ceramic–matrix composites10.1016/S0266-3538(02)00155-0 ↗
6. Effect of microstructure on the properties of TiB2 ceramics10.1111/j.1151-2916.1983.tb09974.x ↗
7. Microstructure and mechanical properties of TiB2-based composites with high volume fraction of Fe-Ni additives prepared by vacuum pressureless sintering10.1016/j.ceramint.2016.10.100 ↗
8. Influences of metallic Co and mechanical alloying on the microstructural and mechanical properties of TiB2 ceramics prepared via pressureless sintering10.1016/j.jeurceramsoc.2011.10.033 ↗
9. Microstructure and mechanical properties of TiB2/(Cu, Ni) interpenetrating phase composites10.1016/j.scriptamat.2006.04.048 ↗
10. Effect of Fe and Cr addition on the sintering behaviour of ZrB2 produced by self-propagation high-temperature synthesis10.1111/j.1151-2916.2002.tb00540.x ↗
11. In situ synthesis and densification of submicrometer-grained B4C–TiB2 composites by pulsed electric current sintering10.1016/j.jeurceramsoc.2010.10.028 ↗
12. Pressureless sintering of internally synthesized SiC-TiB2 composites with improved fracture strength10.1016/j.jallcom.2010.09.152 ↗
13. Tribological properties of TiB2 and TiB2–MoSi2 ceramic composites10.1016/j.jeurceramsoc.2005.01.054 ↗
14. Processing and mechanical properties of ZrO2–TiB2 composites10.1016/j.jeurceramsoc.2004.09.017 ↗
15. Microstructure–mechanical properties relations in SiC–TiB2 composite10.1016/j.matchemphys.2012.01.007 ↗
16. Study of the influence of TiB2 particles on the melt structure of the hypoeutectic Al–Cu alloy by small angle X-ray scattering10.1016/j.matchemphys.2013.10.027 ↗
17. Structural, electrical and dielectric properties of CNT doped SeTe glassy alloys10.1016/j.matchemphys.2016.04.053 ↗
18. The influence of CNTs on the thermoelectric properties of a CNT/Bi2Te3 composite10.1016/j.carbon.2012.10.008 ↗
19. Silane modification on mesoporous silica coated carbon nanotubes for improving compatibility and dispersity in epoxy matrices10.1016/j.compositesa.2015.07.019 ↗
20. Mechanical properties and fracture characteristics of CNTs-doped W–Nb alloys10.1016/j.jnucmat.2014.08.048 ↗
21. Microstructure and mechanical properties of spark plasma sintered Al2O3-SiC-CNTs hybrid nanocomposites10.1016/j.ceramint.2016.05.005 ↗
22. Effect of particle size, heating rate and CNT addition on densification, microstructure and mechanical properties of B4C ceramics10.1016/j.ceramint.2015.03.167 ↗
23. Multiwalled carbon nanotubes–TiB2–Ni composite: microstructure and mechanical properties10.1111/j.1744-7402.2008.02295.x ↗
24. Preparation and properties of titanium diboride ceramie matrix reinforeed by carbon nanotubes
25. Effect of sintering temperature on the mechanical properties and microstructure of carbon nanotubes toughened TiB2 ceramics densified by spark plasma sintering10.1016/j.matlet.2015.12.122 ↗
26. An approach to obtaining homogeneously dispersed carbon nanotubes in Al powders for preparing reinforced Al-matrix composites10.1002/adma.200601381 ↗
27. A novel processing technique for CNTs growth on Co-supported molecular sieve coated porous ceramics10.1016/j.matlet.2015.08.097 ↗