journal article·2015-07

Understanding the galvanic interactions between AA2024T3 and mild steel using the scanning vibrating electrode technique

Uyime Donatus, George E. Thompson, Hong Liu, Xiaorong Zhou, Zuojia Liu

Publisher page

Abstract

Abstract The scanning vibrating electrode technique has been used to characterize the galvanic interactions between AA2024T3 and mild steel at room temperature and elevated solution temperatures up to 60 °C in naturally aerated 3.5% NaCl solution. The work shows that from a solution temperature of 43 °C and above, highly localised anodic activities with high intensities occur on the mild steel, compared with the anodic activities occurring on the AA2024T3 alloy in a couple system of the two alloys. The highly localised activities on the mild steel were not observed at 34±1 °C with the surface showing no distinct corrosion activities and AA2024T3 alloy was completely the bulk anodic material at this solution temperature. At room temperature, AA2024T3 was also the bulk anode, although mild anodic activities were detected on the surface of the mild steel alloy. The local corrosion activities revealed by the scanning vibrating electrode technique were in agreement with the micrographs of the surfaces of the alloys after the immersion tests.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Bauxite Residue and Utilization · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Use of SVET and SECM to study the galvanic corrosion of an iron–zinc cell10.1016/j.corsci.2006.04.021 ↗
2. SVET and SECM imaging of cathodic protection of aluminium by a Mg-rich coating10.1016/j.corsci.2007.03.045 ↗
3. Emulation and study of the corrosion behavior of Al alloy 2024-T3 using a wire beam electrode (WBE) in conjunction with scanning vibrating electrode technique (SVET)10.1016/j.corsci.2004.06.021 ↗
4. The localised corrosion of Mg alloy AZ31 in chloride containing electrolyte studied by a scanning vibrating electrode technique10.1016/j.electacta.2013.07.134 ↗
5. Localized corrosion of Magnesium in chloride-containing electrolyte studied by a scanning vibrating electrode technique10.1149/1.2918900 ↗
6. Inhibition of Aluminium Alloy AA2024-T3 pitting corrosion by copper complexing compounds10.1016/j.electacta.2010.05.049 ↗
7. Factors controlling corrosion in high-temperature aqueous solutions: a contribution to the dissociation and solubility data influencing corrosion processes10.1016/S0896-8446(99)00009-1 ↗
8. Corrosion in high-temperature and supercritical water and aqueous solutions: a review10.1016/S0896-8446(03)00031-7 ↗
9. Effects of flow Velocity, pH, and temperature on galvanic corrosion in Alkaline-chloride solutions10.5006/1.3277541 ↗
10. Effect of near-ambient temperature changes on the galvanic corrosion of an AA2024-T3 and mild steel couple10.1149/2.0551501jes ↗