Effect of SrO on the electrical barrier formation and microstructure of TiO2 varistors
Source abstract
Abstract
Abstract TiO 2 -based varistor materials with SrO dopants were prepared by the mechanical mixed oxides synthesis technique using conventional sintering at 1400 °C. I V and microstructural characterization were performed. The composition range of 0.50–2.00 mol % SrO was studied and compared to pure TiO 2 . Experimental evidence shows that small amounts of SrO improve the nonlinear properties of the samples significantly. Optimal varistor characteristics α = 5.50 and E b = 345 V/cm, were obtained with 1.00 mol % SrO-doped TiO 2 . SrO in larger amounts causes the formation of precipitates of the SrTiO 3 layer on the microstructure, being deleterious to the electrical properties. Therefore, dopants such as SrO or TiO 2 play a special role in the morphology of the grain boundary and nonlinear response of these materials. An atomic defect model based on the double barrier Shottky type can be adopted to explain the formation of electrical barriers in TiO 2 grain boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Electronic and Structural Properties of Oxides · Dielectric properties of ceramics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Origin of ZnO varistor10.1111/j.1151-2916.1987.tb04988.x ↗
2. Application of zinc oxide varistors10.1111/j.1151-2916.1990.tb05232.x ↗
3. Effect of TiO2 doping on microstructural and electrical properties of ZnOPr6 O11-based varistor ceramics10.1016/j.jallcom.2010.03.047 ↗
4. Influence of process variables on microstructure and V-I characteristics of multicomponent ZnO-based nonlinear resistors10.1111/j.1151-2916.1987.tb05733.x ↗
5. Influence of additive oxides on the electrical characteristics of ZnO-based composites, British ceramic
6. Effect of Dy2 O3 and La2 O3 on the microstructure and electrical properties of WO3 ceramics10.1016/j.matchemphys.2005.09.011 ↗
7. Microcontact impedance spectroscopy at single grain boundaries in Fe-doped SrTiO3 polycrystals10.1111/j.1151-2916.2001.tb00693.x ↗
8. Varistor property of SnO2·CoO·Ta2 O5 ceramic modified by barium and strontium10.1016/j.jallcom.2007.11.062 ↗
9. Representations of impedance spectra of ceramics: part ii. spectra of polycrystalline SrTiO310.1016/S0025-5408(00)00281-6 ↗
10. Microstructure and electric properties of a SnO2 based varistor10.1016/S0272-8842(97)00076-X ↗
11. The effect of Ta2 O5 and Cr2 O3 on the electrical properties of TiO2 varistors10.1016/S0955-2219(01)00441-1 ↗
12. A new SnO2-based varistor system10.1007/BF00253373 ↗
13. Electrical properties of grain boundaries in polycrystalline compound semiconductors10.1088/0268-1242/5/2/001 ↗
14. Varistor ceramics10.1111/j.1151-2916.1999.tb01793.x ↗
15. Semiconductor grain-boundary admittance: theory10.1103/PhysRevB.30.795 ↗
16. The dc voltage dependence of semiconductor grain-boundary resistance10.1063/1.326334 ↗
17. Carrier transport through grain boundaries in semiconductors10.1103/PhysRevB.33.3952 ↗
18. Synthesis of nanocrystalline TiO2 by tartarate gel method10.1007/BF02707273 ↗
19. Preparation and properties of TiO2 varistors10.1063/1.93134 ↗
20. Varied atmosphere compensation-exploring the roles of barium and bismuth in (ba, bi, nb)-doped TiO2 varistors10.1111/j.1151-2916.1995.tb08637.x ↗
21. Varistors made from TiO2-practicability and limits10.1016/0167-577X(90)90134-8 ↗
22. Nonlinear behavior of TiO2-Ta2 O5-MnO2 material doped with BaO and Bi2 O310.1016/j.matchemphys.2003.12.015 ↗
23. Microstructure and electrical properties of (Ta, Co, Pr) doped TiO2 based electroceramics10.1007/s10854-009-9900-9 ↗
24. Effect of Cr2 O3 in the varistor behaviour of TiO210.1007/BF00278618 ↗
25. Influence of sintering temperature on semi-conductivity and nonlinear electrical properties of TiO2-based varistor ceramics10.1016/j.mseb.2004.10.021 ↗
26. Electrical properties of a TiO2-SrO varistor system
27. Effect of Bi2 O3 addition on the microstructure and electrical properties of the SnO2.CoO.Nb2 O5 varistor system10.1023/A:1018515232646 ↗
28. Second phase development in Sr-doped TiO210.1007/BF00547585 ↗
29. Sintering kinetic studies in nonstoichiometric strontium titanate ceramics10.1016/j.materresbull.2008.06.002 ↗
30. E. Levin, C. Robbins, H. McMurdie, Phase Diagrams for Ceramists, by MKReser, American Ceramic Society, Columbus, OH.
31. Effect of atmosphere on the electrical properties of TiO2–SnO2 varistor systems10.1023/B:JMSE.0000038921.07744.9d ↗
32. The influence of sintering process and atmosphere on the non-ohmic properties of SnO2 based varistor10.1023/A:1008933004042 ↗
33. Effect of oxidizing and reducing atmospheres on the electrical properties of dense SnO2-based varistors10.1016/S0955-2219(00)00177-1 ↗
34. Key role of oxygen at zinc oxide varistor grain boundaries10.1063/1.103661 ↗
35. Role of oxygen at the grain boundary of metal oxide varistors: a potential barrier formation mechanism10.1063/1.1378051 ↗
36. Effects of Sr on the microstructure and electrical properties of (Co, Ta)-doped SnO2 varistors10.1016/j.jallcom.2005.05.041 ↗
37. S. Sze, Phys. Of Semiconductor Devices, John Wiley and Sons (NY).
38. The origin of varistor property of SrTiO3-based ceramics10.1023/A:1023916716329 ↗
39. Low voltage varistors based on SrTiO3 ceramics10.1016/0921-5107(94)01205-9 ↗
40. An investigation of acceptor-doped in grain boundaries10.1088/0022-3727/29/7/014 ↗
41. Influence of Nb2 O5 on the varistor behavior of TiO2 – Cr2 O3 system10.1007/s10854-012-0854-y ↗
42. Nonlinear electrical properties of MnO2-doped TiO2 capacitor varistor ceramics10.1007/s10854-015-3349-9 ↗
43. (Ge, GeO2, Ta2 O5, BaCO3) co-doping TiO2 varistor ceramics10.1016/j.jallcom.2015.05.112 ↗
44. Nonlinear property of (Nb2 O5, SrCO3, Ge, GeO2)-Codoped TiO2-based varistor ceramics10.1111/jace.13921 ↗
45. An elementary picture of dielectric spectroscopy in solids: physical basis10.1021/ed080p1062 ↗