journal article·2015-01

Improving the sintering behavior of mesocarbon-microbeads for the manufacture of high quality carbon products using a joint promoter comprising carbon black and glycidyl methacrylate

Ming-Dar Fang, Jiin Jiang Jow, Yu Heng Yeh, Ho Rei Chen, Mao Sung Wu, Chung Wen Kuo, Tzong Rong Ling, Tsung Han Ho

Publisher page

Abstract

Abstract Carbon-black (CB) and glycidyl methacrylate (GMA) were used together as a joint promoter to improve the quality of sintered mesocarbon products. The results show that, in addition to inhibiting the condensation of β-resin at ∼200 °C, GMA reduces the formation of volatile pyrolysis products during MCMB sintering at ∼300–550 °C, while CB accelerates pyrolysis and lowers the temperature at which the evolution of volatile components begins. Our observations suggest that a cooperative effect, between CB and GMA, improves sintering behavior during sintered mesocarbon product manufacture, resulting in the formation of carbonized carbon blocks with high bending strengths (142 MPa) and high densities (1.87 g cm −3 ).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Polymer crystallization and properties · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Development of new carbon materials produced from mesophase carbon powder
2. Processing of mesocarbon microbeads to high-performance materials: part I. Studies towards the sintering mechanism10.1016/j.carbon.2003.09.020 ↗
3. Swelling and related mechanical and physical properties of carbon nanofiber filled mesophase pitch for use as a bipolar plate material10.1016/j.carbon.2010.06.061 ↗
4. Sinterability enhancement in semicokes obtained by controlled pyrolysis of a petroleum residue10.1016/j.jaap.2008.03.005 ↗
5. The influences of boron on strength and ablation resistance of zirconium-doped graphitised carbons10.1016/j.carbon.2005.01.038 ↗
6. Seal and wear properties of graphite from MCMBs/pitch-based carbon/phenolic-based carbon composites10.1016/j.carbon.2006.03.028 ↗
7. Processing of mesocarbon microbeads to high-performance materials: part II. Reaction bonding by in situ silicon carbide and nitride formation10.1016/j.carbon.2005.07.020 ↗
8. Improving the performance of carbon composites by liquid phase activated sintering of MCMBS doped with Ti/Ni or Fe/Ni10.1016/j.carbon.2004.08.022 ↗
9. Carbon disc of high density and strength prepared from synthetic pitch-derived mesocarbon microbeads10.1016/S0008-6223(98)00298-X ↗
10. The role of carbon black/coal-tar pitch interactions in the early stage of carbonization10.1016/0008-6223(96)00044-9 ↗
11. Interface enhancement of carbon nanotube/mesocarbon microbead isotropic composites10.1016/j.compositesa.2013.09.008 ↗
12. The influence of ball-milling on improving the performance of mesocarbon microbeads based carbon blocks10.1016/j.msea.2011.09.030 ↗
13. Catalytic effect of dopants on microstructure and performance of MCMB-derived carbon laminations10.1016/j.carbon.2003.11.010 ↗
14. Effect of oxidative stabilization on the sintering of mesocarbon microbeads and a study of their carbonization10.1016/j.carbon.2011.03.044 ↗
15. Improving the self-sintering of mesocarbon-microbeads for the manufacture of high performance graphite-parts10.1016/j.carbon.2011.09.052 ↗
16. Comparative study on super fine mesophase powder and MCMB used to manufacture high-density isotropic carbon bulks
17. Self-sinterability of mesocarbon microbeads for preparation of high-density isotropic carbon10.1023/A:1023740517269 ↗
18. Self-sintering of carbon mesophase powders: effect of extraction/washing with solvents10.1016/S0008-6223(99)00169-4 ↗
19. Net-shape production of graphite parts via powder injection moulding of carbon mesophase10.1016/j.jmatprotec.2008.01.019 ↗
20. Carbon foams with high compressive strength derived from mixtures of mesocarbon microbeads and mesophase pitch10.1016/j.carbon.2007.05.014 ↗
21. Production of high-strength carbon artifacts from petroleum residues: influence of the solvent used to prepare mesophase powder10.1021/ef010293x ↗
22. Influences of β-resin content of mesocarbon microbeads on the properties of high density isotropic carbon
23. Reactions at polymer–polymer interfaces for blend compatibilization10.1016/j.progpolymsci.2005.06.003 ↗
24. Free radical polymerization
25. A comparative Tg-Ms study of the carbonization behavior of different pitches10.1021/ef0102871 ↗
26. Carbon/carbon composites with heat-treated pitches: I. Effect of treatment in air on the physical characteristics of coal tar pitches and the carbon matrix derived there from10.1016/S0008-6223(00)00178-0 ↗
27. The effect of oxygen on the processing of mesocarbon microbeads to high-density carbon10.1016/j.carbon.2006.01.004 ↗
28. Effect of sintering temperature on the characteristics of carbons based on mesocarbon microbeads10.1023/A:1018587418496 ↗
29. Thermal behavior of mesocarbon microbeads and physical properties of carbon plates10.1023/B:JMSC.0000016178.95230.04 ↗
30. Effect of calcination conditions of self-sintering mesocarbon microbeads on the characteristics of resulting graphite10.1023/A:1004871601753 ↗
31. The influence of processing temperature on the structure and properties of mesophase-based polygranular graphites10.1023/B:JMSC.0000013877.95022.2d ↗