journal article·2019-04

Influence of temperature on the magnetic properties of nanostructured Fe-49 wt.% Co-2 wt.% V alloy powder synthesized by mechanically milling pre-alloyed gas-atomized powder

Kathem Bazzi, Vamsi M. Meka, Anuj Rathi, Tanjore V. Jayaraman

Publisher page

Abstract

Abstract The magnetic properties of nanostructured Fe-49 wt.% Co-2 wt.% V alloy powder, synthesized by mechanically milling pre-alloyed gas-atomized powder, were investigated from cryogenic to high temperatures (60–900 K). At cryogenic temperatures, the as-milled nanostructured alloy powder exhibited stable magnetic properties. The decrease in MS was by a minuscule ∼2 %—from ∼212 ± 1 Am2/kg (at 300 K) to ∼217 ± 2 Am2/kg (at 60 K), and the increase in HCI was by a modest (∼8%)—from ∼6.1 kA/m (at 300 K) to ∼6.6 kA/m (at 60 K). At high temperatures (>300 K), both MS and HCI decreased. Annealing improved the soft-magnetic properties of the as-milled alloy powder. The annealed alloy powders retained their nanostructure—grain size ∼15–30 nm. The as-milled alloy annealed at 900 K showed the highest MS and the lowest HCI among all the other annealing temperatures—MS increased by ∼7%–∼225 ± 1 Am2/kg and the HCI decreased to ∼1.0 kA/m. The annealed nanostructured Fe-49 wt% Co-2 wt.% V alloy powder exhibited magnetic properties comparable to a few annealed nanostructured Fe- Co-based alloys. The annealed nanostructured alloy powder displayed fairly stable magnetic properties over a wide range of cryogenic temperatures. The annealed Fe-49 wt.% Co-2 wt.% V alloy powder is better suited for soft-magnetic applications than the as-milled powder, from ambient to cryogenic temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Magnetic Properties of Alloys · Magnetic properties of thin films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Nanostructured soft magnetic materials synthesized via mechanical alloying: a review10.1007/s10854-017-8082-0 ↗
2. Cullity · 2009
3. Soft magnetic materials for electrical engineering: state of the art and recent advances10.1002/etep.70 ↗
4. Recent advances and future directions in magnetic materials10.1016/j.actamat.2003.08.011 ↗
5. Bozorth · 1993 · 190
6. Soft magnetic FeCo alloys: alloy development, processing, and properties10.1179/174328005X14339 ↗
7. Near-equiatomic FeCo alloys: constitution, mechanical, and magnetic properties10.1016/j.pmatsci.2005.04.001 ↗
8. The mechanism of mechanical alloying10.1007/BF02644161 ↗
9. Materials synthesis by mechanical alloying10.1146/annurev.ms.19.080189.001005 ↗
10. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
11. Suryanarayana · 2004
12. Characterization and magnetic coercivity of nanostructured (Fe50Co50)100-xVx (x=0,2,4) powders containing a small amount of CoV3 intermetallic obtained by mechanical alloying10.1016/j.powtec.2011.07.042 ↗
13. Magnetic and structural studies of mechanically alloyed nanostructured Fe49Co49V2 powders10.1016/j.jmmm.2010.08.025 ↗
14. Influence of mechanical milling on the microstructure of 49Fe-49Co-2V soft magnetic alloy10.1023/A:1017910705656 ↗
15. Influence on the structural and magnetic properties of pre-alloyed gas-atomized Fe49Co49V2 powders during mechanical milling10.1016/j.powtec.2018.03.038 ↗
16. High strength bulk Fe-Co alloys produced by powder metallurgy10.1063/1.2838466 ↗
17. Microstructural and magnetic observations of compacted FeCoV nanoparticles10.1109/20.908664 ↗
18. Cullity · 2001 · 376
19. Suryanarayana · 1998 · 153
20. Precision lattice constants from X-ray powder photographs10.1063/1.1751937 ↗
21. Structural and chemical changes in mine waste mechanically activated in various milling environments
22. X-ray line broadening from filed aluminum and wolfram10.1016/0001-6160(53)90006-6 ↗
23. Ferreria · 2012
24. Krishnan · 2016
25. Kittle · 2004
26. German · 2005
27. Soft ferromagnetism in nanostructured mechanical alloying FeCo-based powders10.1016/j.jmmm.2007.04.037 ↗
28. Mechanical alloying of FeCo nanocrystalline magnetic powders10.1007/s11664-004-0155-1 ↗
29. Microstructure and magnetic properties of nanosized Fe-Co alloy powders synthesized by mechanochemical and mechanical alloying process10.1016/S0167-577X(02)00938-2 ↗
30. Chen · Phys. Rev. · 1962 · 129 · 12110.1103/PhysRev.129.121 ↗
31. Variation of the saturation magnetization of ferromagnetic substances at helium temperatures
32. A theory of domain creation and coercive force in polycrystalline ferromagnets10.1103/PhysRev.95.917 ↗
33. Classical theory of temperature dependence of magnetic anisotropy energy10.1103/PhysRev.96.1335 ↗
34. Magnetic properties of stainless steels at room temperature and cryogenic temperatures10.1016/j.jmmm.2009.01.002 ↗
35. Ordering transformations in Fe-50Co based alloys10.1179/msc.1981.15.1.21 ↗
36. Magnetic evidence of structural-phase-transformations in Fe-Co alloy nanocrystals produced by a carbon arc10.1063/1.364887 ↗
37. An increase of structural order parameter in Fe-Co-V soft-magnetic alloy after thermal aging10.1063/1.117569 ↗
38. The disorder → order transformation in iron-cobalt based alloys10.1179/030634573790445541 ↗
39. Dieter · 1988
40. Okamoto · 2016 · vol. 3
41. Magnetic properties of commercial soft magnetic alloys at cryogenic temperatures10.1007/978-1-4757-0244-6_6 ↗
42. Physics behind the magnetic hysteresis loop—a survey of misconceptions in magnetism literature10.1016/S0304-8853(02)01339-2 ↗