journal article·2016-06

Influence of corrosion on the morphology and structure of ZrOxNyZrN coatings deposited on stainless steel

G.I. Cubillos, E. Romero, J.E. Alfonso

Publisher page

Abstract

Abstract Morphological and structural changes of zirconium nitride and oxynitride thin films (ZrO x N y /ZrN) deposited via DC magnetron sputtering on stainless steel substrates (AISI 316L, 304LS, and 2205) in a reactive N 2 and N 2 /O 2 atmosphere mixed with argon were studied. The crystallographic structures of the films were established through X-ray diffraction (XRD). The morphology was evaluated via scanning electron microscopy (SEM) and atomic force microscopy (AFM), and the corrosion resistance was evaluated using electrochemical techniques based on linear polarization (PL). The XRD analysis showed that the films were composed of cubic ZrO x N y and monoclinic ZrO 2 . The electrochemical test showed that there was corrosion because of pitting phenomena and delamination in the coating deposited on AISI 2205 and AISI 304LS substrates. For AISI 316L, the damage generated by the corrosive solution was less. On the various substrates, an increase in the films' roughness was observed after the corrosion test.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Crevice corrosion behaviour of superaustenitic stainless steels: dynamic electrochemical impedance spectroscopy and atomic force microscopy studies10.1016/j.corsci.2008.11.008 ↗
2. Recent developments in stainless steels10.1016/j.mser.2009.03.001 ↗
3. Effect of deformation conditions on the corrosion behavior of the low alloy structural steel girders10.1016/j.matdes.2015.09.160 ↗
4. Corrosion behavior of stainless and low-chromium steels and IN625 in molten nitrate salts at 600 °C10.1016/j.solmat.2015.08.011 ↗
5. Correlation between critical pitting temperature and degree of sensitization on alloy 2205 duplex stainless steel10.1016/j.corsci.2010.10.009 ↗
6. Influence of nickel additions on the corrosion behaviour of low nitrogen 22% Cr series duplex stainless steels10.1016/j.corsci.2008.05.023 ↗
7. The influence of nanocrystalline structure and processing route on corrosion of stainless steel: a review10.1016/j.corsci.2014.11.041 ↗
8. Microstructure study of a nanocrystalline two-phase ZrNxOy thin film10.1016/j.matchemphys.2009.04.034 ↗
9. Characteristics and anticorrosion performance of Fe-doped TiO2 films by liquid phase deposition method10.1016/j.apsusc.2014.07.042 ↗
10. Surface modification of biomedical AISI 316L stainless steel with zirconium carbonitride coatings10.1016/j.apsusc.2015.02.191 ↗
11. Electrochemical corrosion resistance of CeO2-Cr/Ti coatings on 304 stainless steel via pack cementation10.1016/S1002-0721(14)60535-4 ↗
12. Santonen · 2010
13. Wear and corrosion protection of 316-L femoral implants by deposition of thin films10.1016/S0257-8972(01)01321-4 ↗
14. Comparative study of the corrosion performance of titanium(Ti), titanium nitride(TiN), titaniumdioxide (TiO2) and nitrogen-doped titanium oxides (N–TiO2), as coatings for biomedical applications10.1016/j.ceramint.2015.05.153 ↗
15. Investigation of structural evolution and electrochemical behaviour of zirconia thin films on the 316L stainless steel substrate formed via sol–gel process10.1016/j.surfcoat.2011.05.024 ↗
16. Influence of O2/Ar ratio on the structural, electrical, and optical properties of transparent conductive zirconium-doped ZnO films prepared by radiofrequency sputtering10.1016/j.scriptamat.2009.03.036 ↗
17. Wuxi Zhou, Microstructure, phase stability and thermal conductivity of plasma sprayed Yb2O3,Y2O3 co-stabilized ZrO2 coatings10.1016/j.solidstatesciences.2010.11.043 ↗
18. Preparation of ZrNxOy films by magnetron sputtering using air as a reactive gas10.1016/j.tsf.2010.04.097 ↗
19. Preparation, characterization of ZrOxNy/C and its application in PEMFC as an electrocatalyst for oxygen reduction10.1016/j.jpowsour.2007.07.067 ↗
20. Effect of nitrogen flow rate on the structure and mechanical properties of ZrN thin films on Si(100) and stainless steel substrates10.1016/j.matchemphys.2006.10.007 ↗
21. Influence of the electrical power applied to the target on the optical and structural properties of ZrON films produced via RF magnetron sputtering in a reactive atmosphere10.1016/j.tsf.2014.09.006 ↗
22. Synthesis and biological characterization of zirconium oxynitride thin film growth by radio-frequency sputtering10.1016/j.tsf.2012.06.018 ↗
23. Ph. Goudeau, J.P. Riviere. Corrosion resistance of ZrNxOy thin films obtained by rf reactive magnetron sputtering10.1016/j.tsf.2004.08.091 ↗
24. Synthesis and characterization of zirconium oxynitride ZrOxNy coatings deposited via unbalanced DC magnetron sputtering10.1016/j.matchemphys.2013.04.012 ↗
25. Tribocorrosion behaviour of ZrOxNy thin films for decorative applications10.1016/j.surfcoat.2005.11.083 ↗
26. Corrosion resistance of zirconium oxynitride coatings deposited via DC unbalanced magnetron sputtering and spray pyrolysis-nitriding10.1016/j.apsusc.2014.11.168 ↗
27. The tetragonal-monoclinic transformation in zirconia: lessons learned and future trends10.1111/j.1551-2916.2009.03278.x ↗
28. High-temperature reaction of oxygen-stabilized a-Zr(O) with nitrogen10.1016/j.jnucmat.2013.12.024 ↗
29. The fictional transition of the preferential orientation of yttria-stabilized zirconia thin films10.1016/j.tsf.2012.10.061 ↗
30. Effect of deposition temperature on microstructure and corrosion resistance of ZrN thin films deposited by DC reactive magnetron sputtering10.1016/j.matchemphys.2011.06.013 ↗
31. Phase transition and mechanical properties of ZrNxOy thin films on AISI 304 stainless steel10.1016/j.surfcoat.2011.06.051 ↗