journal article·2015-08

The influence of nitrogen and oxygen additions on the thermal characteristics of aluminium-based thin films

J. Borges, F. Macedo, F.M. Couto, M.S. Rodrigues, C. Lopes, P. Pedrosa, T. Polcar, L. Marques, F. Vaz

Publisher page

Abstract

The ternary aluminium oxynitride (AlNxOy) system offers the possibility to obtain a wide range of properties by tailoring the ratio between pure Al, AlNx and AlOy and therefore opening a significant number of possible applications. In this work the thermal behaviour of AlNxOy thin films was analysed by modulated infrared radiometry (MIRR), taking as reference the binary AlOy and AlNx systems. MIRR is a non-contact and non-destructive thermal wave measurement technique based on the excitation, propagation and detection of temperature oscillations of very small amplitudes. The intended change of the partial pressure of the reactive gas (N2 and/or O2) influenced the target condition and hence the deposition characteristics which, altogether, affected the composition and microstructure of the films. Based on the MIRR measurements and their qualitative and quantitative interpretation, some correlations between the thermal transport properties of the films and their chemical/physical properties have been found. Furthermore, the potential of such technique applied in this oxynitride system, which present a wide range of different physical responses, is also discussed. The experimental results obtained are consistent with those reported in previous works and show a high potential to fulfil the demands needed for the possible applications of the systems studied. They are clearly indicative of an adequate thermal response if this particular thin film system is aimed to be applied in small sensor devices or in electrodes for biosignal acquisition, such as those for electroencephalography or electromyography as it is the case of the main research area that is being developed in the group.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: GaN-based semiconductor devices and materials · Acoustic Wave Resonator Technologies · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Growth of thin, crystalline oxide, nitride and oxynitride films on metal and metal alloy surfaces10.1016/S0167-5729(99)00013-8 ↗
2. Vaz · 2013
3. Material selection for hard coatings10.1116/1.573700 ↗
4. Mechanical characterization of reactively magnetron-sputtered TiN films10.1016/S0257-8972(03)00711-4 ↗
5. Novel TiNx-based biosignal electrodes for electroencephalography10.1088/0957-0233/22/12/124007 ↗
6. An aluminium nitride light-emitting diode with a wavelength of 210 nanometres10.1038/nature04760 ↗
7. Novel flexible Dry multipin electrodes for EEG: signal quality and interfacial impedance of Ti and TiN coatings
8. The contribution of grain boundary barriers to the electrical conductivity of titanium oxide thin films10.1063/1.2970034 ↗
9. Optical properties and thermal stability of pulsed-sputter-deposited AlxOy/Al/AlxOy multilayer absorber coatings10.1016/j.solmat.2008.11.005 ↗
10. AlNxOy thin films deposited by DC reactive magnetron sputtering10.1016/j.apsusc.2010.08.076 ↗
11. Influence of stoichiometry and structure on the optical properties of AlNxOy films10.1088/0022-3727/46/1/015305 ↗
12. Process monitoring during AlNxOy deposition by reactive magnetron sputtering and correlation with the film's properties10.1116/1.4863957 ↗
13. Optical properties of AlNxOy thin films deposited by DC magnetron sputtering
14. Preparation and characterization of CrNxOy thin films: the effect of composition and structural features on the electrical behavior10.1016/j.apsusc.2011.05.109 ↗
15. Development of tantalum oxynitride thin films produced by PVD: study of structural stability10.1016/j.apsusc.2013.06.061 ↗
16. Thermal stability, mechanical and corrosion behaviour of niobium-based coatings in the ternary system Nb-O-N10.1016/j.tsf.2010.12.021 ↗
17. ZrOxNy decorative thin films prepared by the reactive gas pulsing process10.1088/0022-3727/42/19/195501 ↗
18. Structural stability of decorative ZrNxOy thin films10.1016/j.surfcoat.2005.02.100 ↗
19. Effect of thermal treatments on the structure of MoNxOy thin films10.1016/j.vacuum.2008.03.015 ↗
20. Reactive sputtering of TiOxNy coatings by the reactive gas pulsing process. Part I: pattern and period of pulses10.1016/j.surfcoat.2007.03.002 ↗
21. Ion beam studies of TiNxOy thin films deposited by reactive magnetron sputtering10.1016/j.surfcoat.2003.10.131 ↗
22. Electrical properties of AlNxOy thin films prepared by reactive magnetron sputtering10.1016/j.tsf.2012.06.062 ↗
23. Influence of composition, bonding characteristics and microstructure on the electrochemical and optical stability of AlOxNy thin films10.1016/j.electacta.2013.05.020 ↗
24. Innovation in concentrated solar power10.1016/j.solmat.2011.05.020 ↗
25. Analysis of multifunctional oxycarbide and oxynitride thin films by modulated IR radiometry10.1088/0022-3727/43/39/395301 ↗
26. Modulated IR radiometry for determining thermal properties and basic characteristics of titanium thin films10.1116/1.4884351 ↗
27. Simulated annealing analysis of Rutherford backscattering data10.1063/1.119524 ↗
28. RBS/simulated annealing analysis of iron-cobalt silicides10.1016/S0168-583X(97)00809-4 ↗
29. Supermatrix approach to polarized neutron reflectivity from arbitrary spin structures10.1103/PhysRevB.60.16073 ↗
30. Almond · 1996
31. Modulated IR radiometry applied to study TiO2 coatings with gold nanocluster inclusions10.1007/s10765-013-1398-y ↗
32. Thickness control of coatings by means of modulated IR radiometry10.1002/ppap.200931503 ↗
33. TiO2 coatings with Au nanoparticles analysed by photothermal IR radiometry10.1088/0022-3727/45/10/105301 ↗
34. TiAgx thin films for lower limb prosthesis pressure sensors: effect of composition and structural changes on the electrical and thermal response of the films10.1016/j.apsusc.2013.07.021 ↗
35. Extremum method: inverse solution of the two-layer thermal wave problem10.1063/1.2058180 ↗
36. Background fluctuation limit of infrared detection of thermal waves at high temperatures10.1068/htec49 ↗
37. Photothermal characterization of sputtered thin films and substrate treatment
38. Potential of modulated IR radiometry for the on-line control of coatings10.1002/ppap.200732005 ↗
39. Influence of oxygen addition on the target voltage during reactive sputtering of aluminium10.1088/0963-0252/10/4/302 ↗
40. Discharge voltage measurements during reactive sputtering of oxides10.1016/j.tsf.2005.12.256 ↗
41. Target poisoning during reactive magnetron sputtering: part I: the influence of ion implantation10.1016/j.surfcoat.2003.10.006 ↗
42. Target poisoning during reactive magnetron sputtering: part II: the influence of chemisorption and gettering10.1016/j.surfcoat.2003.10.007 ↗
43. Magnetron sputter deposition: linking discharge voltage with target properties10.1016/j.tsf.2008.11.108 ↗
44. Understanding the discharge voltage behavior during reactive sputtering of oxides10.1063/1.2404583 ↗
45. Magnetron sputtering of aluminium using oxygen or nitrogen as reactive gas10.1016/S0040-6090(97)01197-8 ↗
46. Reactive DC magnetron sputtering of elemental targets in Ar/N2 mixtures: relation between the discharge characteristics and the heat of formation of the corresponding nitrides10.1016/S0257-8972(99)00124-3 ↗
47. Structural, optical and mechanical properties of aluminium nitride films prepared by reactive DC magnetron sputtering10.1016/j.tsf.2005.07.281 ↗
48. Depla · 2008
49. Trends in sputtering10.1016/S0079-6816(99)00021-0 ↗
50. TRIDYN simulation of target poisoning in reactive sputtering10.1016/j.nimb.2004.10.044 ↗
51. Biaxial alignment in sputter deposited thin films10.1016/j.tsf.2006.06.027 ↗
52. Microstructural evolution during film growth10.1116/1.1601610 ↗
53. Thermal conductivity of aluminium nitride thin films prepared by reactive magnetron sputtering10.1088/0022-3727/45/1/015301 ↗
54. Thermal conductivity of titanium aluminum silicon nitride coatings deposited by lateral rotating cathode arc10.1016/j.tsf.2013.04.029 ↗
55. Thermal characterization of hard decorative thin films10.1002/ppap.200730609 ↗
56. Evolution of the functional properties of titanium–silver thin films for biomedical applications: influence of in-vacuum annealing10.1016/j.surfcoat.2014.11.020 ↗
57. Agy:TiNx thin films for dry biopotential electrodes: the effect of composition and structural changes on the electrical and mechanical behaviours10.1007/s00339-014-8943-9 ↗