Investigation of thin film end-termination on multilayer ceramic capacitors
Source abstract
Abstract
The thin film of silver, chromium and titanium as end-termination studies were performed on multilayer ceramic capacitors (MLCCs) based on ZnMgTiO3 + 0.25TiO2 (ZMT′) ceramic with Ag95–Pd05 internal electrodes. ZMT′ multilayer ceramic capacitors were prepared by tape casting, and Ag95–Pd05 paste was attached on the green foil of ceramics as an internal electrode. After lamination, the green chips were sintered at 900 °C for 2 h, then samples were sputtered the external electrodes of thin film as the end-termination, showing COG EIA specification (TCC within ±30 ppm °C−1 in the temperature range −55 °C to +125 °C). There is no extra curing process, so manufacturing cost could be saved and internal stress of the MLCCs may be reduced. To improve the adhesion between thin film end-termination and dielectric body, the chromium and titanium were applied as medium layer in this study. The mechanical and electrical properties of the MLCCs were investigated subsequently. The results showed that end-termination with titanium/silver and chromium/silver have good performances on mechanical properties of MLCC, but dielectric loss and impedance is a little bit higher compared to standard MLCC.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Dielectric materials and actuators · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Interfacial reaction of Ag/Pd Metals with Pb-based relaxor ferroelectrics including additives10.1016/S0272-8842(00)00046-8 ↗
2. Relationships between interfacial interaction, electrode formulation and cofiring mismatch of relaxor-based multilayer ceramic devices
3. Interfacial development and microstructural imperfection of multilayer ceramic chips with Ag/Pd electrodes10.1016/S0272-8842(01)00047-5 ↗
4. Preparation, microstructureal development and dielectric properties of Pb(Mg1/3Nb2/3)O3–Pb(TixZr1−x)O3 multilayer ceramic capacitors10.1007/BF01151090 ↗
5. Encapsulation of Ag films on SiO2 by Ti reactions using Ag–Ti alloy/bilayer structures and an NH3 ambient10.1063/1.116564 ↗
6. Nanocrystalline and nanocomposite CrCu and CrCu–N films prepared by magnetron sputtering10.1016/S0257-8972(99)00065-1 ↗
7. Phase equilibria in the system ZnO–TiO210.1111/j.1151-2916.1960.tb14326.x ↗
8. Low-fired (Zn,Mg)TiO3 microwave dielectrics10.1111/j.1151-2916.1999.tb02268.x ↗
9. Microwave dielectric properties of Zn0.95Mg0.05TiO3+0.25TiO2 ceramics with 3ZnO–B2O3 addition10.1143/JJAP.43.7596 ↗
10. Low-temperature sintering and microwave dielectric properties of zinc metatitanate-rutile mixtures using boron10.1111/j.1151-2916.1999.tb02200.x ↗
11. A study of ceramic addition in end termination of multilayer ceramics capacitors with cofiring process10.1016/j.matchemphys.2006.01.020 ↗
12. Processing–structure–adhesion relationship in CVD diamond films on titanium substrates10.1016/S0925-9635(98)00251-9 ↗
13. A simple technique for measuring the adhesion of brittle films to ductile substrates with application to diamond-coated titanium10.1557/JMR.1997.0260 ↗
14. Cautions about the use of equivalent series resistance (ESR) in specifying capacitors