journal article·2010-08

Oxide structure and corrosion mechanism of ZrSnNbFeCrCu alloy studied with transmission electron microscopy and nano-indentation: Relation to corrosion kinetics

Yan-Zhang Liu, Jeong-Yong Park, Hyun-Gil Kim, Yong-Hwan Jeong

Materials Chemistry and Physics· Volume 122· Issue 2-3
Publisher page

Abstract

Abstract The oxides formed in 360 °C PWR-simulating loop environment and in 360 °C lithiated water on Zr–1.1Sn–0.2Nb–0.35Fe–0.15Cr–0.1Cu (wt.%) was investigated in an effort to relate oxide structure to corrosion kinetics. The corrosion rate of the ZrSnNbFeCrCu alloy was much lower than that of Zircaloy-4 in both environments and increased with the final annealing temperature of the PWR-simulation water environment. The oxide formed on the ZrSnNbFeCrCu corroded in both environments was observed to have a layered structure and the thickness of a fully developed layer was different depending on the heat-treatment and corrosion environment. The grain morphology of the oxide was a mixture of equiaxed and columnar grains whose shape and size were changed depending on their position from the oxide/metal interface. The columnar grains in the oxide formed on the ZrSnNbFeCrCu annealed at 470 °C and corroded in PWR-simulation water were longer and wider than those of the other two cases, and the density of columnar grains in this condition was significantly higher than those of the other two cases especially in the outer region of the oxide. From the results of nano-indentation test, it can be assumed that the better corrosion resistance of the ZrSnNbFeCrCu alloy oxides corresponds to a more homogenous distributed compressive stress throughout the oxides.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Raman spectroscopy study of the tetragonal-to-monoclinic transition in zirconium oxide scales and determination of overall oxygen diffusion by nuclear microanalysis of O18
2. Mechanism of corrosion degradation in Sn
3. Microanalysis of the matrix and the oxide–metal interface of uniformly corroded zircaloy
4. Microstructure of oxide layers formed during autoclave testing of zirconium alloys, 10th International Symposium on Zr in the Nuclear Industry
5. Effect of annealing temperature on corrosion behavior and ZrO2 microstructure of Zircaloy-4 cladding tube
6. Microstructure of oxide films formed during the waterside corrosion of the Zircaloy-4 cladding in lithiated environment
7. Oxide growth mechanism on zirconium alloys
8. B. Cox, Comments on the paper “The influence of oxide stress on the breakaway oxidation of Zircaloy-2” by D.H. Bradhurst and P.M. Heuer, J. Nucl. Mater. 41 (1971) 96.
9. Oxidation of intermetallic precipitates in Zircaloy-4: impact of irradiation
10. In situ XRD analysis of the oxide layers formed by oxidation at 743K on Zircaloy 4 and Zr–1NbO10.1016/S0022-3115(00)00051-9 ↗
11. Characterisation of pre-transition oxides on Zircaloys10.1016/S0022-3115(01)00580-3 ↗
12. Structure of zirconium alloy oxides formed in pure water studied with synchrotron radiation and optical microscopy: relation to corrosion rate10.1016/j.jnucmat.2003.08.038 ↗
13. Study of the mechanisms controlling the oxide growth under irradiation: characterization of irradiated Zircaloy-4 and Zr–1Nb–O oxide scales
14. J.-Y. Park, B.-K. Choi, S.J. Yoo, Y.H. Jeong, Corrosion behavior and oxide properties of Zr–1.1wt% Nb–0.05wt% Cu alloy, J. Nucl. Mater. 359 (2006) 59.
15. J.-Y. Park, S.J. Yoo, B.-K. Choi, Y.H. Jeong, Corrosion and oxide characteristics of Zr–1.5Nb–0.4Sn–0.2Fe–0.1Cr alloys in 360°C pure water and LiOH solution, J. Nucl. Mater. 373 (2008) 343.
16. Studies of zirconium alloy oxide layers using synchrotron radiation10.4028/www.scientific.net/MSF.347-349.471 ↗
17. Transmission electron microscopy examination of oxide layers formed on Zr alloys10.1016/j.jnucmat.2005.10.012 ↗
18. Microstructure and growth mechanism of oxide layers formed on Zr alloys studied with micro-beam synchrotron radiation, zirconium in the nuclear industry