Impacts of synthesis temperature and carbon content on the electrochemical performances of the Li3V2(PO4)3/C composite synthesized by a polyol method
Source abstract
Abstract
Abstract As a cathode material for Li-ion battery, Li 3 V 2 (PO 4 ) 3 was synthesized by a polyol method using LiOH·H 2 O, V 2 O 5 , NH 4 H 2 PO 4 , sucrose, and ethylene glycol as starting materials. Under the polyol process, the impacts of synthesis parameters, including the sintering temperature, holding time, and carbon content, on the morphological evolution and electrochemical properties of Li 3 V 2 (PO 4 ) 3 were investigated. The XRD results show the formation of pure Li 3 V 2 (PO 4 ) 3 with monoclinic crystal structure. The images of SEM show the similar-spherical morphology with uniform and optimized particles size, which greatly improves the electrochemical performance. The carbon coated on the Li 3 V 2 (PO 4 ) 3 particles was clearly observed by electron microscopy. The particle size of Li 3 V 2 (PO 4 ) 3 powders gradually decreases with the increase of carbon content in composite. In the potential range of 3.0–4.3 V, the composite synthesized at 800 °C for 10 h with 10% carbon content shows the highest discharge capacity of 128 mAh g −1 at 0.1C, which is nearly close to the theoretical capacity, and it remains fairly stable (more than 126 mAh g −1 ) even after the 20th cycles. Based on the results from the electrochemical impedance spectroscopy (EIS) analysis, the apparent diffusion coefficients of Li ions in the composite materials are between 1.82 × 10 −10 and 3.79 × 10 −9 cm 2 s −1 , which are much higher than those of olivine LiFePO 4 .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Phospho-olivines as positive-electrode materials for rechargeable lithium batteries10.1149/1.1837571 ↗
2. The design of a LiFePO4/carbon nanocomposite with a core–shell structure and its synthesis by an in situ polymerization restriction method10.1002/anie.200802539 ↗
3. Optimized LiFePO4 – polyacene cathode material for lithium-ion batteries10.1002/adma.200600578 ↗
4. Proof of supervalent doping in olivine LiFePO410.1021/cm801781k ↗
5. LiMnPO4 as the cathode for lithium batteries10.1149/1.1475195 ↗
6. Olivine-type cathodes: achievements and problems10.1016/S0378-7753(03)00239-8 ↗
7. Nanostructured Composites: a high capacity, fast rate Li3V2(PO4)3/carbon cathode for rechargeable lithium batteries10.1002/1521-4095(20021104)14:21<1525::AID-ADMA1525>3.0.CO;2-3 ↗
8. The Li3V2(PO4)3/C composites with high-rate capability prepared by a maltose-based sol–gel route10.1016/j.electacta.2010.05.093 ↗
9. Characteristics of Li3V2(PO4)3/C powders prepared by ultrasonic spray pyrolysis10.1016/j.jpowsour.2010.11.086 ↗
10. Effects of synthetic route on structure and electrochemical performance of Li3V2(PO4)3/C cathode materials10.1016/j.electacta.2011.01.109 ↗
11. Li3V2(PO4)3/C composite as an intercalation-type anode material for lithium-ion batteries10.1016/j.jpowsour.2010.09.024 ↗
12. Synthesis and improved electrochemical performances of porous Li3V2(PO4)3/C spheres as cathode material for lithium-ion batteries10.1016/j.jpowsour.2011.04.057 ↗
13. Analysis of the chemical diffusion coefficient of lithium ions in Li3V2(PO4)3 cathode material10.1016/j.electacta.2009.11.096 ↗
14. Determination of the chemical diffusion coefficient of lithium in LiFePO410.1016/S0167-2738(02)00134-0 ↗
15. Synthesis and performance of Li3(V1−xMgx)2(PO4)3 cathode materials10.1016/j.jpowsour.2010.02.081 ↗
16. A novel synthesis of Li3V2(PO4)3/C nanocomposite with excellent high-rate capacity and cyclability10.1016/j.materresbull.2012.09.047 ↗
17. Electroactivity of natural and synthetic triphylite10.1016/S0378-7753(01)00727-3 ↗
18. Surface modification by silver coating for improving electrochemical properties of LiFePO410.1016/j.ssc.2003.10.015 ↗
19. A novel concept for the synthesis of an improved LiFePO4 lithium battery cathode10.1149/1.1449302 ↗
20. Electron microscopy study of the LiFePO4 to FePO4 phase transition10.1149/1.2192695 ↗
21. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
22. Recent advances in the research of polyanion-type cathode materials for Li-ion batteries10.1039/c0ee00713g ↗
23. Electrochemical property: structure relationships in monoclinic Li3−yV2(PO4)310.1021/ja034565h ↗
24. Synthesis and optimization of NASICON-type Li3V2(PO4)3 by adipic acid-mediated solid-state approach10.1007/s10800-013-0543-4 ↗
25. Synthesis of Li3V2(PO4)3 with high performance by optimized solid-state synthesis routine10.1016/j.jpowsour.2006.07.029 ↗
26. Synthesis and performance of carbon-coated Li3V2(PO4)3 cathode materials by a low temperature solid-state reaction10.1016/j.jpowsour.2009.11.056 ↗
27. Synthesis and characterization of Li3V(2−2x/3)Mgx(PO4)3/C cathode material for lithium-ion batteries10.1016/j.jpowsour.2010.02.009 ↗
28. Hydrothermal synthesis of carbon-coated lithium vanadium phosphate10.1016/j.electacta.2008.07.038 ↗
29. Hydrothermal synthesis and electrochemical properties of Li3V2(PO4)3/C-based composites for lithium-ion batteries10.1021/am200987y ↗
30. Polyol process for the synthesis of LiFePO4 rhombohedral particles10.1016/j.apt.2011.02.006 ↗
31. Plate-type LiFePO4 nanocrystals by low temperature polyol-assisted solvothermal reaction and its electrochemical properties10.1016/j.jallcom.2011.05.081 ↗
32. Synthesis and electrochemical properties of Li2MnSiO4/C nanoparticles via polyol process10.1007/s12598-010-0158-4 ↗
33. Synthesis of lithium manganese phosphate nanoparticle and its properties10.1016/j.jpcs.2007.03.027 ↗
34. Synthesis of LiFePO4 nanoparticles and their electrochemical properties10.1016/j.jpcs.2007.03.019 ↗
35. A new synthesis route to nanocrystalline olivine phosphates and their electrochemical properties10.1166/jnn.2007.18078 ↗
36. Preparation of metallic powders and alloys in polyol media: a thermodynamic approach10.1006/jssc.2000.8802 ↗
37. Electrochemical performance of Li3V2(PO4)3/C cathode materials using stearic acid as a carbon source10.1016/j.electacta.2010.11.073 ↗
38. A fast synthesis of Li3V2(PO4)3 crystals via glass-ceramic processing and their battery performance10.1016/j.jpowsour.2011.06.094 ↗
39. Synthesis and electrochemical properties of Li3V2(PO4)3/C with one-dimensional (1D) nanorod structure for cathode materials of lithium-ion batteries10.1016/j.solidstatesciences.2012.04.024 ↗
40. Synthesis of Li3V2(PO4)3/C with high tap-density and high-rate performance by spray drying and liquid nitrogen quenching method10.1016/j.electacta.2012.01.108 ↗
41. Sol–gel synthesis and electrochemical properties of 9LiFePO(4)center dot Li3V2(PO4)3/C composite cathode material for lithium ion batteries10.1016/j.electacta.2012.03.181 ↗
42. Carbon supported, Al doped-Li3V2(PO4)3 as a high rate cathode material for lithium-ion batteries10.1039/c2jm00022a ↗
43. Charge ordering in lithium vanadium phosphates: electrode materials for lithium-ion batteries10.1021/ja028973h ↗
44. Highly entangled carbon nanoflakes on Li3V2(PO4)3 microrods for improved lithium storage performance10.1039/C2RA22394E ↗
45. Characterizations of the electrode/electrolyte interfacial properties of carbon coated Li3V2(PO4)3 cathode material in LiPF6 based electrolyte10.1016/j.electacta.2012.06.082 ↗
46. Core–shell Li3V2(PO4)3@C composites as cathode materials for lithium-ion batteries10.1021/jp800040s ↗
47. Electrochemical properties of lithium vanadium phosphate as a cathode material for lithium-ion batteries10.1149/1.1479295 ↗
48. One-step synthesis of Li3V2(PO4)3/C positive material with high performance for lithium-ion batteries10.1016/j.ssc.2008.02.015 ↗
49. Investigations on the synthesis and electrochemical performance of Li3V2(PO4)3/C by different methods10.1007/s11581-009-0362-0 ↗
50. Combustion synthesized nanocrystalline Li3V2(PO4)3/C cathode for lithium-ion batteries10.1016/j.materresbull.2012.09.014 ↗
51. A carbon-coated Li3V2(PO4)3 cathode material with an enhanced high-rate capability and long lifespan for lithium-ion batteries10.1039/c2ta01254e ↗
52. Electrochemical performance of Li3−xNaxV2(PO4)3/C composite cathode materials for lithium ion batteries10.1016/j.jpowsour.2011.10.133 ↗
53. A study on insertion/removal kinetics of lithium ion in LiCrxMn2−xO4 by using powder microelectrode10.1016/j.jpowsour.2007.06.120 ↗
54. Improved electrochemical performance of La0.7Sr0.3MnO3 and carbon co-coated LiFePO4 synthesized by freeze-drying process10.1016/j.electacta.2009.08.020 ↗
55. Kinetic study on LiFePO4/C nanocomposites synthesized by solid state technique10.1016/j.jpowsour.2005.10.098 ↗
56. Doping effects of zinc on LiFePO4 cathode material for lithium ion batteries10.1016/j.elecom.2006.07.014 ↗
57. The defect chemistry of LiFePO4 prepared by hydrothermal method at different pH values10.1016/j.jpowsour.2009.05.007 ↗