journal article·2014-10

Aging of medium strength aluminum alloy friction stir welds produced by different process parameter after tensile strain hardening

Emanuela Cerri, Paola Leo

Materials Chemistry and Physics· Volume 147· Issue 3
Publisher page

Abstract

Abstract Effect of tool rotation rate and travel speed on aging of 6082T6 friction stir welds after tensile strain hardening were investigated using Vickers microhardness (HV) measurements and precipitation hardening concepts. Tensile tests were performed at constant strain rate up to natural fracture followed by aging at low and medium temperatures. The results showed that HV measured on strain hardened FSW joints was not very sensitive to travel speeds experienced during FSW process, at constant rotation rate; anyway, strain hardening was very effective on hardness and induce an average increase by 20–25% in the stirred zone (SZ). Strain hardening was also very effective on aging at 200 °C, while it was not at 300 °C. At this temperature, HV assumed uniform values along joint cross section.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Rhodes · Scr. Mater. · 1997 · 36 · 6910.1016/S1359-6462(96)00344-2 ↗
2. Liu · Scr. Mater. · 1997 · 37 · 35510.1016/S1359-6462(97)00093-6 ↗
3. Murr · J. Mater. Sci. Lett. · 1997 · 16 · 180110.1023/A:1018556332357 ↗
4. Heurtier · Mater. Sci. Forum · 2002 · 396–402 · 153710.4028/www.scientific.net/MSF.396-402.1537 ↗
5. Bala Srinivasan · Mater. Sci. Eng. A · 2005 · 392 · 29210.1016/j.msea.2004.09.065 ↗
6. Lee · J. Mater. Sci. Lett. · 2003 · 38 · 418310.1023/A:1026337807920 ↗
7. Lee · Scr. Mater. · 2003 · 49 · 42310.1016/S1359-6462(03)00301-4 ↗
8. Uzun · Mater. Des. · 2005 · 26 · 4110.1016/j.matdes.2004.04.002 ↗
9. Chen · Int. J. Mach. Tool. Manuf. · 2004 · 44 · 1203
10. Somasekharan · Mater. Charact. · 2004 · 52 · 4910.1016/j.matchar.2004.03.005 ↗
11. Li · J. Mater. Sci. Lett. · 2000 · 19 · 104710.1023/A:1006795221194 ↗
12. Murayama · Mater. Sci. Eng. A · 1998 · 250 · 12710.1016/S0921-5093(98)00548-6 ↗
13. Sha · Acta Mater. · 2003 · 51 · 188310.1016/S1359-6454(02)00595-5 ↗
14. Murayama · Acta Mater. · 1999 · 47 · 153710.1016/S1359-6454(99)00033-6 ↗
15. Matsuda · Mater. Sci. Eng. A · 1999 · 262 · 23210.1016/S0921-5093(98)00962-9 ↗
16. El-Danaf · Adv. Mater. Res. · 2010 · 83–86 · 421
17. Miao · Scr. Mater. · 1999 · 40 · 87310.1016/S1359-6462(99)00046-9 ↗
18. Miao · J. Mater. Sci. Lett. · 2000 · 19 · 20110.1023/A:1006798305992 ↗
19. Miao · Metall. Mater. Trans. A · 2000 · 31 · 36110.1007/s11661-000-0272-2 ↗
20. Kuijpers · Mater. Charact. · 2003 · 49 · 40910.1016/S1044-5803(03)00036-6 ↗
21. Kuijpers · Mater. Sci. Eng. A · 2005 · 394 · 910.1016/j.msea.2004.09.073 ↗
22. Elangovan · Mater. Char. · 2008 · 59 · 116810.1016/j.matchar.2007.09.006 ↗
23. El-Danaf · Mater. Des. · 2013 · 46 · 56110.1016/j.matdes.2012.10.047 ↗
24. Imam · Mater. Des. · 2013 · 53 · 73010.1016/j.matdes.2013.06.014 ↗
25. Cerri · J. Mater. Process. Technol. · 2013 · 213 · 7510.1016/j.jmatprotec.2012.09.001 ↗
26. Safarkhanian · J. Mater. Sci. · 2009 · 44 · 545210.1007/s10853-009-3735-x ↗
27. Charit · Scr. Mater. · 2008 · 58 · 36710.1016/j.scriptamat.2007.09.052 ↗
28. Mahoney · Metall. Mater. Trans. · 1998 · 29A · 195510.1007/s11661-998-0021-5 ↗
29. Murr · J. Mater. Sci. · 1998 · 33 · 124310.1023/A:1004385928163 ↗
30. Sato · Metall. Mater. Trans. · 1999 · 30A · 242910.1007/s11661-999-0251-1 ↗
31. Mishra · Mat. Sci. Eng. · 2005 · R50 · 110.1016/j.mser.2005.07.001 ↗
32. Cerri · Metall. Mat. Trans. A · 2011 · 42 · 128310.1007/s11661-010-0524-8 ↗