journal article·2015-07

Effect of Mg/B2O3 molar ratio and furnace temperature on the phase evaluation and morphology of SiC–B4C nanocomposite prepared by MASHS method

Hamed Roghani, Seyed Ali Tayebifard, Asghar Kazemzadeh, Leila Nikzad

Publisher page

Abstract

Abstract In this study, SiC–B4C nanocomposite has been synthesized in situ successfully by Mechanical activated combustion synthesis method (MASHS). Initially Si, C, B2O3 and Mg powders as raw materials were weighed according to different molar ratio of Mg to B2O3. In next step theses materials were milled in a planetary mill under Ar atmosphere. The synthesis step was performed in a tube furnace equipped with controlled atmosphere system. The different furnace temperature was investigated on the phase synthesis and morphology of the products. The specimens in the various steps were studied by XRD analysis for evaluation of the phase compositions and calculation of the average crystallite size of them. The morphology of synthesized products was investigated by scanning and transmission electron microscopes (SEM&TEM). The final product contains main phases MgO, B4C and SiC. Also, In this sample byproducts were characterized such as Mg3B2O6, Mg2B2O5 and remaining carbon. XRD pattern of synthesized sample showed the considerable effect of increasing Mg to B2O3 molar ratio on reducing the amount of Mg3B2O6, Mg2B2O5 and remaining carbon. SiC–B4C composite was synthesized with more homogenous morphology by reducing the furnace temperature from 1000 to 900 °C, but reduction of temperature up to 800 °C give rise to uncompleted reaction whereas some unreacted Si remains. Average crystallite sizes of optimal sample were calculated 10.5 and 8 nm for SiC and B4C respectively. These values are consisted of the TEM results somehow while grain size was less than 70 nm. Also SEM observation showed fine grains with sizes falling in the nanometer range.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Aluminum Alloys Composites Properties · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Influence of mechanical activation on combustion synthesis of fine silicon carbide (SiC) powder10.1016/j.powtec.2009.07.016 ↗
2. High porosity SiC ceramics prepared via a process involving an SHS stage10.1016/S0955-2219(02)00424-7 ↗
3. http://www.ioffe.rssi.ru/SVA/NSM/Semicond/SiC/thermal.html#Basic, in.
4. Synthesis of submicron B4C by mechanochemical method10.1016/j.matlet.2005.12.016 ↗
5. Effect of milling on the combustion synthesis of ternary system B2O3, Mg and C10.1049/mnl.2012.0079 ↗
6. Barin · 1995
7. Highly dense β-SiC ceramics with submicron grains prepared by sintering of nanocrystalline powders10.1016/j.scriptamat.2012.05.037 ↗
8. Preparation of B4C–SiC composite ceramics through hot pressing assisted by mechanical alloying10.1016/j.ijrmhm.2013.04.012 ↗
9. Spark plasma sintering of B4C–SiC composites10.1016/j.solidstatesciences.2012.05.037 ↗
10. Microstructure and properties of (SiC, TiB2)/B4C composites by reaction hot pressing10.1016/j.ceramint.2005.05.022 ↗
11. Combustion synthesis of advanced materials: Part I. Reaction parameters10.1016/0079-6425(94)00011-5 ↗
12. Combustion synthesis and nanomaterials10.1016/j.cossms.2008.12.002 ↗
13. Self-sustaining reactions induced by ball milling10.1016/S0079-6425(01)00002-0 ↗
14. Some aspects in self-propagating high-temperature synthesis10.1016/S0272-8842(03)00119-6 ↗
15. Munir · 1989
16. Selfpropagating high temperature synthesis of ceramic materials
17. Mechanochemical assisted synthesis of B4C nanoparticles10.1016/j.apt.2010.05.002 ↗
18. Mechanical-activation-assisted combustion synthesis of SiC10.1016/j.matlet.2006.05.032 ↗
19. Effect of initial composition on boron carbide production by SHS process followed by acid leaching10.1016/j.solidstatesciences.2012.07.004 ↗
20. Effect of HCl concentration on TiB2 separation from a self-propagating high-temperature synthesis (SHS) product10.1016/j.materresbull.2006.05.032 ↗
21. X'Pert highscore plus
22. Formation of boric acid by surface oxidation of amorphous boron powder: characterization and quantitative estimation
23. http://www.industrycortex.com/datasheets/profile/751912975/product-data-sheet-boric-oxide-b2o3-anhydrous-boric-acid-technica, in.
24. Mechanical alloying and milling10.1016/S0079-6425(99)00010-9 ↗
25. Review: liquid phase sintering10.1007/s10853-008-3008-0 ↗
26. Effects of heat-treatment temperature and starting composition on morphology of boron carbide particles synthesized by carbothermal reduction10.1016/j.ceramint.2012.06.070 ↗