journal article·2018-09

Influence of C addition on solid-state reaction of Ti-Si-C system

Kian Kasraee, Mardali Yousefpour, Seyed Ali Tayebifard

Publisher page

Abstract

Abstract The effect of C addition on synthesis behavior, microstructure, reaction mechanism and high-temperature oxidation resistance of Ti-Si system was investigated. The Ti5Si3Cx-TiC composite was synthesized by introducing the C into Ti-Si system and using mechanically activated self-propagating high-temperature synthesis (MASHS). The addition of 1 mol C into 5Ti+3Si reduced activation energy of reaction from 207.5 kJ/mol to 189 kJ/mol. The reaction in the Ti-Si-C system was initiated by the formation of TiC and followed by synthesis of an interstitial solid solution of Ti5Si3Cx, while reaction in Ti-Si was activated by solid-state diffusion of Si into Ti. The ignition temperature of the reaction was reduced from 1000 °C to 900 °C when the combustion temperature slightly increased as a result of the C addition into the system. The wave velocity of the reaction was also declined from 55 mm/s to 48 mm/s. The microstructural observations show that dissolution of the C in Ti5Si3 crystal structure restricted microcracks formation through coarse grains. Moreover, the oxidation resistance of titanium silicide was improved by the formation of the interstitial solid solution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: MXene and MAX Phase Materials · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Mechanical behaviour and oxidation resistance of structural silicides10.1179/174328006X79454 ↗
2. Phase composition, microstructure evolution and wear behavior of Ni-Mn-Si coatings on copper by laser cladding10.1016/j.surfcoat.2017.08.072 ↗
3. Structure and mechanical properties of in-situ titanium matrix composites with homogeneous Ti5Si3 equiaxial particle-reinforcements10.1016/j.msea.2017.05.043 ↗
4. Effects of first-scale TiBw on secondary scale Ti5Si3 characteristics and mechanical properties of in-situ (Ti5Si3+TiBw)/Ti6Al4V composites10.1016/j.jallcom.2017.02.044 ↗
5. Formation of Ti5Si3 and V5Si3 by self-propagating high-temperature synthesis and evaluation of combustion wave kinetics10.1016/j.jallcom.2017.04.283 ↗
6. Use of TiH2 as a reactant in combustion synthesis of porous Ti5Si3 and Ti5Si3/TiAl intermetallics10.1016/j.jallcom.2016.01.236 ↗
7. Investigation of pre-milling effect on synthesis of Ti5Si3 prepared by MASHS, SHS, and MA10.1007/s11665-013-0707-8 ↗
8. Production of TiB2 by SHS and HCl leaching at different temperatures: characterization and investigation of sintering behavior by SPS10.1016/j.ceramint.2016.10.174 ↗
9. Reactive synthesis and characterization of titanium aluminides produced from elemental powder mixtures10.1007/s10973-015-4815-6 ↗
10. Porous TiAl3 intermetallics with symmetrical graded pore-structure fabricated by leaching space holder and thermal explosion process10.1016/j.intermet.2018.01.010 ↗
11. Some aspects in self-propagating high-temperature synthesis10.1016/S0272-8842(03)00119-6 ↗
12. Levashov · Self-propagating high-temperature synthesis of advanced materials and coatings · 2017 · 62 · 203
13. Effects of interstitial additions on the structure of Ti5 Si310.1557/JMR.2000.0256 ↗
14. Thermal expansion anisotropy of ternary titanium silicides based on Ti5Si310.1016/j.actamat.2004.04.033 ↗
15. Influence of Al addition on the products of self-propagating high-temperature synthesis of Al–Ti–Si system10.1016/j.matchemphys.2008.10.024 ↗
16. Effect of substitution of Si by Al on microstructure and synthesis behavior of Ti5Si3based alloys fabricated by mechanically activated self propagating high-temperature synthesis10.1016/j.apt.2014.01.008 ↗
17. Effect of Ni addition on the formation mechanism of Ti5Si3during self-propagation high-temperature synthesis and mechanical property10.1016/j.jeurceramsoc.2014.02.018 ↗
18. Influence of Cu addition on the self-propagating high temperature synthesis of Ti5Si3in Cu–Ti–Si system10.1016/j.matchemphys.2008.04.047 ↗
19. Effect of Fe addition on self-propagating high-temperature synthesis of Ti5Si3in Fe–Ti–Si system10.1016/j.jallcom.2007.02.009 ↗
20. Electrosynthesis of Ti5Si3,Ti5Si3/TiC, and Ti5Si3/Ti3SiC2from Ti-Bearing blast furnace slag in molten CaCl210.1007/s11663-018-1192-0 ↗
21. Combustion synthesis of advanced materials10.1016/0009-2509(92)87034-N ↗
22. Combustion synthesis and the electric field: a review10.3103/S1061386217030037 ↗
23. Combustion synthesis of advanced materials: part 1. Reaction parameters
24. self-propagating high-temperature synthesis of ceramic materials
25. Combustion synthesis of advanced materials: part 2 classification, applications and modeling. Reaction parameters10.1016/0079-6425(94)00012-3 ↗
26. Barin · 1995
27. Spark plasma sintering of SiC powders produced by different combustion synthesis routes10.1016/j.jeurceramsoc.2014.09.014 ↗
28. In-situ development of ZrB2 particles and their effect on microstructure and mechanical properties of AA5052 metal-matrix composites10.1016/j.matdes.2015.05.020 ↗
29. In-situ synthesized Ti5Si3/TiC composites by spark plasma sintering technology10.1007/s10853-005-5159-6 ↗
30. Microstructure and mechanical behaviour of in situ fabricated AA6061–TiC metal matrix composites10.1016/j.acme.2016.12.006 ↗
31. Combustion synthesis of Zr–Si intermetallic compounds10.1016/S0925-8388(99)00077-8 ↗
32. Characteristics of the combustion synthesis of TiC and Fe-TiC composites10.1007/BF01151089 ↗
33. Solubility and diffusion coefficient of electrically active titanium in silicon10.1143/JJAP.30.2659 ↗
34. Phase reaction and diffusion path of the SiC-Ti system10.1007/s11661-997-0275-3 ↗
35. A study of reaction kinetics in dynamically densified Ti-Si powder mixtures10.1016/S1359-6462(99)00083-4 ↗
36. Influence of internal diffusion barriers on carbon diffusion in pure titanium and Ti–6Al–4V during diamond deposition10.1016/S0925-9635(98)00439-7 ↗
37. Dunmead · 1989 · vol. 72 · 2318
38. Reaction sintering phenomena of self-propagating high-temperature synthesis-derived ceramic powders in the Ti-Si-C system
39. The Ti/c-Si solid state reaction: III. The low-temperature reaction kinetics10.1016/0169-4332(90)90035-X ↗
40. Thermal expansion of Ti5Si3 with Ge, B, C, N, or O additions10.1557/JMR.2000.0257 ↗
41. Aluminum titanate based ceramics from aluminum sludge waste10.1016/j.ceramint.2017.05.057 ↗
42. Tailoring of magnesium aluminum titanate based ceramics from aluminum dross10.1016/j.matdes.2017.12.027 ↗
43. Oxidation resistance of Ti5Si3 and Ti5Si3Zx at 1000 °C (Z= C, N, or O)10.1023/A:1016012507682 ↗
44. High-temperature oxidation behavior of Ti5Si3-based intermetallics10.1016/j.intermet.2008.06.013 ↗
45. Elevated-temperature oxidation behavior of titanium silicide and titanium silicide–based alloy and composite10.1007/s11661-998-0089-y ↗