journal article·2015-03

Thermodynamic modeling of Cu–Ni–Y system coupled with key experiments

Mohammad Mezbahul-Islam, Mamoun Medraj

Publisher page

Abstract

Abstract A complete thermodynamic description of the Cu–Ni–Y ternary system has been obtained using the CALPHAD (CALculation of PHAse Diagram) approach. Ternary solubility of the third element in the binary compounds in the Cu–Ni–Y system is described using sublattice model within the compound energy formalism (CEF) to take into account the recently reported experimental solubility ranges. The modified quasi-chemical model (MQM) has been used to describe the liquid phase in order to account for the presence of short range ordering properly. To study the melting behavior of the Cu–Ni–Y alloys and to verify the consistency of the thermodynamic model with experimental results, 10 key samples were prepared and the phase transformation temperatures were measured using differential scanning calorimeter (DSC). The microstructural characterization and crystallographic analysis of the alloys were carried out using scanning electron microscopy (SEM) coupled with WDS analysis and X-ray diffraction (XRD). Several vertical sections, liquidus projection and isothermal section at 973 K have been calculated and found to be in good agreement with the current experimental data as well as with the literature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Metallurgical and Alloy Processes · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (83)

Show source-provided references
1. Chill-cast in situ composites in the pseudo-ternary Mg-(Cu,Ni)-Y glass-forming system: microstructure and compressive properties10.1557/jmr.2007.0032 ↗
2. Glass forming ability and reliability in fracture stress for Mg–Cu–Ni–Nd–Y bulk metallic glasses10.1016/j.msea.2008.04.036 ↗
3. Improving glass-forming ability of Mg-Cu-Y via substitutional alloying: effects of Ag versus Ni10.1557/jmr.2006.0294 ↗
4. Formation of Mg-Cu-Ni-Ag-Zn-Y-Gd bulk glassy alloy by casting into cone-shaped copper mold in air atmosphere10.1557/JMR.2005.0181 ↗
5. The contributions of different alloying additions to hardening in rapidly solidified magnesium alloys10.1016/S0921-5093(96)10806-6 ↗
6. Phase equilibrium in Mg-Cu-y10.1038/srep03033 ↗
7. Effect of the partial replacement of nickel or yttrium by other metals on hydrogen absorption by yttrium-nickel (YNi3) compounds
8. Characteristics of the Y2 Ni17−xCux System10.1016/0022-4596(70)90023-X ↗
9. A part of room temperature section of phase diagram of Y-Cu-Ni (Y ≤ 16.7 at.%) system
10. Experimental study of the Cu–Ni–Y system at 700°C using diffusion couples and key alloys10.1016/j.jallcom.2013.02.011 ↗
11. A critical thermodynamic assessment of the Mg-Ni, Ni-Y binary and Mg-Ni-Y ternary systems10.1016/j.calphad.2009.01.001 ↗
12. The equilibrium phase diagram of the magnesium–copper–yttrium system10.1016/j.jct.2008.03.004 ↗
13. Thermodynamic modeling of the Mg-Cu-Ni ternary system using the modified quasichemical model
14. Yttrium-nickel system
15. The systems Y-Fe, Y-Ni, and Y-Cu
16. Intermetallic compounds of rare earth and 3d transition metals10.1088/0034-4885/40/10/002 ↗
17. Nash · 1991
18. Thermodynamics of formation of yttrium-nickel alloys10.1007/BF02654856 ↗
19. Thermodynamic assessment of the Ni-Y system10.1016/S0925-8388(96)02436-X ↗
20. Experimental and thermodynamic assessment of the Nb-Ni-Y system10.1007/s11669-007-9243-2 ↗
21. Hydrogen absorption of rare-earth (3d) transition intermetallic compounds10.1016/0022-5088(76)90058-8 ↗
22. On the heat of formation of solid alloys. II10.1016/0022-5088(76)90180-6 ↗
23. Optimized predictions for heats of formation of transition-metal alloys. II10.1016/0364-5916(84)90034-8 ↗
24. Enthalpy of formation of molten yttrium-nickel alloys
25. Experimental investigation and thermodynamic optimization of the Y-Cu binary system10.1007/BF02647621 ↗
26. Constitution and thermodynamics of Cu-Y alloys10.1002/bbpc.19971010415 ↗
27. Massalski · 1986 · 977
28. Cu-Y (copper-yttrium)10.1361/105497198770342166 ↗
29. The Cu−Y (Copper-Yttrium) system10.1007/BF02868285 ↗
30. High-temperature heat content measurements of copper-RE (RE = yttrium, lanthanum, cerium, praseodymium, neodymium) binary systems10.2320/matertrans1989.30.273 ↗
31. Partial and integral enthalpies of formation of liquid copper-yttrium and copper-zirconium alloys
32. Thermodynamic properties of liquid binary alloys of copper with scandium, yttrium, and lanthanum
33. Thermochemistry of alloys of transition metals: Part IV. Alloys of copper with scandium, yttrium, lanthanum, and lutetium10.1007/BF02667340 ↗
34. Thermodynamic properties of liquid copper-yttrium alloys
35. Thermochemical measurements and assessment of the phase diagrams in the system Y-Ba-Cu-O
36. Phase diagram and thermochemistry of the copper-yttrium system10.1016/0364-5916(90)90005-K ↗
37. Hansen · 1957
38. Chakrabarti · 1994 · 276
39. Liquidus and solidus curves of the systems copper-manganese and copper-nickel
40. Copper-nickel equilibrium phase diagram
41. Thermodynamic study of molten nickel-copper alloys
42. Neutron measurement of clustering in the alloy CuNi [copper-nickel]10.1103/PhysRev.175.868 ↗
43. X-ray measurements on spinodal decomposition in copper-nickel alloys10.1002/pssa.2210050109 ↗
44. Clustering in copper-nickel alloys: a diffuse neutron-scattering study10.1103/PhysRevB.17.409 ↗
45. Spinodal decomposition in copper-nickel alloys by artificial composition modulation technique10.1016/0036-9748(81)90339-2 ↗
46. Calorimetry at 1100 to 1200°: the copper-nickel, copper-silver, and copper-cobalt systems
47. Heat of mixing of iron alloys
48. Calorimetric Examination of mixing heats of nickel and cobalt alloys10.2355/tetsutohagane1955.63.6_953 ↗
49. Determination of the enthalpy of mixing of liquid alloys using a high-temperature mixing calorimeter10.1007/BF02671966 ↗
50. Thermodynamic properties of liquid copper-nickel alloys
51. Activities of copper and nickel in liquid copper-nickel alloys
52. Thermodynamic studies of liquid copper alloys by electromotive force method. II. Copper-nickel-oxygen and copper-nickel systems10.1007/BF02666202 ↗
53. Thermodynamic properties of liquid nickel-copper alloys
54. Heats of formation of copper-nickel alloys
55. Heats of formation of solid nickel-copper and nickel-gold alloys10.1016/0001-6160(60)90135-8 ↗
56. Thermodynamic properties of copper-nickel alloys10.1002/bbpc.19690730618 ↗
57. Investigation of thermodynamic properties of binary metallic systems by the electromotive force method. VII. Cu-Ni solid solutions
58. Thermodynamic properties of solid copper-nickel alloys10.1016/0001-6160(62)90187-6 ↗
59. Thermodynamic study of solid copper-nickel and nickel-molybdenum alloys by emf. measurements using solid electroyte10.2320/jinstmet1952.37.5_509 ↗
60. Thermodynamic activities in copper-nickel-iron solid solutions
61. Thermodynamic properties of copper-nickel alloys: measurements and assessment10.1179/mst.1989.5.5.427 ↗
62. Thermodynamic re-evaluation of the copper-nickel system10.1016/0364-5916(92)90022-P ↗
63. Phase equilibria and thermodynamics of binary copper systems with 3d-metals. VI. Copper-nickel system10.1007/s11106-007-0073-x ↗
64. Structural phase transitions in YCu1−xμx (M = Ni, Ag, and Ga)10.1016/0022-5088(88)90207-X ↗
65. Structural study of the pseudobinary Y(Ni,Cu)2 system10.1016/S0966-9795(02)00120-6 ↗
66. Crystal structure of R.E.-Ni4Au compounds and unit cell constants in the YCo5-YNi5-YCu5 series
67. The Cu-Ni-Y (Copper-Nickel-Yttrium) system10.1007/s11669-009-9578-y ↗
68. SGTE data for pure elements10.1016/0364-5916(91)90030-N ↗
69. The modified quasichemical model I - binary solutions10.1007/s11663-000-0103-2 ↗
70. The modified quasi-chemical model: Part II. Multicomponent solutions10.1007/s11661-001-0226-3 ↗
71. The modified quasi-chemical model: part III. Two sublattices10.1007/s11661-001-0229-0 ↗
72. The modified quasi-chemical model: part IV. Two-sublattice quadruplet approximation10.1007/s11661-001-0230-7 ↗
73. Thermodynamic assessment of the Ca–Zn, Sr–Zn, Y–Zn and Ce–Zn systems10.1016/j.calphad.2008.03.001 ↗
74. Thermodynamic evaluation and optimization of Al-La, Al-Ce, Al-Pr, Al-Nd and Al-Sm systems using the modified quasichemical model for liquids10.1016/j.calphad.2010.11.002 ↗
75. Critical evaluation and thermodynamic optimization of the Al-Ce, Al-Y, Al-Sc and Mg-Sc binary systems10.1016/j.calphad.2008.03.002 ↗
76. Critical evaluation and thermodynamic optimization of the binary systems in the Mg-Ce-Mn-Y system10.1007/s11669-007-9095-9 ↗
77. Critical assessment and thermodynamic modeling of Mg–Zn, Mg–Sn, Sn–Zn and Mg–Sn–Zn systems10.1016/j.calphad.2011.10.007 ↗
78. Thermodynamic evaluation and optimization of the LiCl-NaCl-KCl-RbCl-CsCl-MgCl2-CaCl2 system using the modified quasi-chemical model
79. Thermodynamic evaluation and optimization of the LiF-NaF-KF-MgF2-CaF2 system using the modified quasi-chemical model10.1007/s11661-001-0228-1 ↗
80. A general “geometric” thermodynamic model for multicomponent solutions10.1016/S0364-5916(01)00052-9 ↗
81. Thermodynamic criterion for judging the symmetry of ternary systems and criterion applications10.1007/BF02665997 ↗
82. C. Bale, A. Pelton, W. Thompson, FactSage 6.4, Factsage thermochemical software and databases, http://www.crct.polymtl.ca/.
83. Sublattice modelling of the μ-phase10.1016/S0364-5916(98)00033-9 ↗