journal article·2010-04

Influence of Al on the microstructure and carburization performance of a N-based alloy coating

Feliciano José Ricardo Cangue, Ana Sofia Clímaco Monteiro D’Oliveira

Materials Chemistry and Physics· Volume 120· Issue 2-3
Publisher page

Abstract

Abstract Carburization is a degradation mechanism involving the diffusion of carbon into a metal alloy and its accumulation on the surface. Coke forms on the internal walls of crude oil refining equipment and adversely affects its efficiency and service life. In an attempt to enhance the service life of materials exposed to these aggressive environments, this work investigated the development of a protective coating to reduce the diffusion of carbon into the surfaces of components. Coatings were tailored by mixing the atomized Ni alloy (Hastealloy C) with 5 wt% and 15 wt% Al powders and deposited by Plasma Transferred Arc hardfacing. Pack carburizing was carried out at 650 °C and 850 °C for 6 h, and temperature stability was tested in an air furnace to evaluate the performance of the coatings. Characterization included measurement of Vickers microhardness profiles and microstructure analysis by optical and scanning electron microscopy and X-ray diffraction. The good weldability of the original Ni-based alloy was not altered by the presence of Al. Richer Al coatings developed ordered aluminide compounds in a Ni matrix and exhibited increased hardness and dilution. Exposure to temperatures of 650 °C and 850 °C in an air furnace and to a carburizing environment neither compromised coating hardness nor produced a carburizing layer, although carbides were identified at the top surface. Our results will be of benefit in the development of an alternative solution for the protection of components operating in carburizing environments.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. J.Z. Albertsen, Thesis, Norwegian University Sci. Technol., 2007, 146p.
2. P. Szakálos, Thesis, Royal Institute of Technology, Depart. Mater. Sci. Eng. Division. Corros. Sci., Stockholm, Sweden, 2004, 88p.
3. Grabke · Materiali in Technologies · 2002 · 36 · 297
4. Grabke · MTAEC9 · 2004 · 38 · 211
5. Zhang · Corrosion Science · 2007 · 49 · 145010.1016/j.corsci.2006.06.032 ↗
6. Heuer · Scripta Materialia · 2007 · 56 · 106710.1016/j.scriptamat.2007.02.035 ↗
7. Commandre · Fuel Processing Technology · 2005 · 86 · 79510.1016/j.fuproc.2004.08.001 ↗
8. Di Gabriele · Materials and Corrosion · 2007 · 58 · 8110.1002/maco.200603989 ↗
9. Silva · Scripta Materialia · 2007 · 56 · 31710.1016/j.scriptamat.2006.09.004 ↗
10. Ando · IISIJ International · 1989 · 29 · 511
11. Deevi · Progress in Materials Science · 1997 · 82 · 17710.1016/S0079-6425(97)00014-5 ↗
12. Lee · Materials Chemistry and Physics · 2002 · 77 · 8610.1016/S0254-0584(01)00567-3 ↗
13. Gatto · Surface & Coatings Technology · 2004 · 187 · 26510.1016/j.surfcoat.2004.02.013 ↗
14. Deuis · Composite Sciences and Technology · 1998 · 58 · 29910.1016/S0266-3538(97)00131-0 ↗
15. Santos · Journal of Materials Processing Technology · 2006 · 171 · 16710.1016/j.jmatprotec.2005.02.269 ↗
16. Almeida · Transactions of Materials and Heat Treatment · 2004 · 25 · 948
17. T.F. Silveira, MSc Thesis, Universidade Federal do Rio de Janeiro, COPPE, Rio de Janeiro, 2002, 206p.
18. Hall · 1985
19. Yaedu · Materials Science and Technology · 2005 · 21 · 45910.1179/174328413X13789824293380 ↗
20. Graf · Transactions of Materials and Heat Treatment · 2004 · 25 · 152
21. Jimenez · Surface & Coatings Technology · 1999 · 120–121 · 35810.1016/S0257-8972(99)00464-8 ↗
22. Szakálos · Corrosion Science · 2006 · 48 · 167910.1016/j.corsci.2005.05.023 ↗