journal article·2013-09

Direct current sputtered aluminum-doped zinc oxide films for thin crystalline silicon heterojunction solar cell

Yu Qiu, Henrico Hermawan, Ivan Gordon, Jef Poortmans

Materials Chemistry and Physics· Volume 141· Issue 2-3
Publisher page

Abstract

Abstract The high-power high-throughput direct current (DC) magnetron sputtering of aluminum-doped zinc oxide (AZO) film was investigated for fabricating amorphous silicon/crystalline silicon heterojunction solar cells. The AZO films were deposited using 1.0 wt.% and 2.0 wt.% Al-doped ZnO targets. The functional properties of the deposited films were characterized by measuring the electrical conductivity, Hall mobility, free carrier density and optical transparency. The influence of the sputtering power, oxygen concentration, substrate temperature, post-annealing and film thickness on the film properties were studied systematically. The oxygen in the sputtering gas deteriorates the electrical and optical performance of AZO films, which can be improved by post annealing. An optimal value of 1.0 × 10−3 Ω cm for the resistivity and 90% for the optical transmission was obtained at processing temperatures below 250 °C. Two types of thin Si heterojunction solar cells were prepared and compared using DC sputtered AZO film as the front electrode. Results show that DC sputtered AZO films meet the requirements for use as transparent front electrode in thin Si heterojunction solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: ZnO doping and properties · Thin-Film Transistor Technologies · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Transparent conducting oxide semiconductors for transparent electrodes10.1088/0268-1242/20/4/004 ↗
2. 2009
3. Future directions for higher-efficiency HIT solar cells using a thin silicon wafer10.1016/j.jnoncrysol.2012.03.025 ↗
4. Oxygen influence on sputtered high rate ZnO:Al films from dual rotatable ceramic targets10.1016/j.apsusc.2010.02.057 ↗
5. Low resistivity transparent conducting Al-doped ZnO films prepared by pulsed laser deposition10.1016/S0040-6090(03)01158-1 ↗
6. Structural and functional properties of Al:ZnO thin films grown by pulsed laser deposition at room temperature10.1016/j.tsf.2011.10.072 ↗
7. Low pressure chemical vapor deposition of aluminum-doped zinc oxide for transparent conducting electrodes10.1149/1.3599055 ↗
8. Effect of thermal annealing on ZnO:Al thin films grown by spray pyrolysis10.1016/j.spmi.2007.04.005 ↗
9. Sol–gel synthesis of ZnO transparent and conductive films: a critical approach10.1016/j.solmat.2012.06.016 ↗
10. High rate direct current magnetron sputtered and texture-etched zinc oxide films for silicon thin film solar cells10.1016/j.tsf.2007.06.061 ↗
11. Epitaxy-free monocrystalline silicon thin film: first steps beyond proof-of-concept solar cells10.1002/pip.1048 ↗
12. Thin-film monocrystalline-silicon solar cells on glass with an efficiency of 11%
13. 8.5% efficiency for thin-film polycrystalline silicon solar cells: a study of hydrogen plasma passivation
14. Oxygen pressure dependences of structure and properties of ZnO films deposited on amorphous glass substrates by pulsed laser deposition10.1143/JJAP.47.2225 ↗
15. Effect of deposition power on structural and electrical properties of Al-doped ZnO films using pulsed direct-current magnetron sputtering with single cylindrical target10.1016/j.mssp.2010.12.013 ↗
16. Effect of substrate temperature on the properties of Al-doped ZnO films by RF magnetron sputtering10.4028/www.scientific.net/MSF.663-665.1293 ↗
17. The correlation between preferred orientation and performance of ITO thin films10.1007/s10854-007-9231-7 ↗
18. Effects of sputtering pressure and thickness on properties of ZnO:Al films deposited on polymer substrates10.1007/s10832-008-9523-1 ↗
19. Modified Thornton model for magnetron sputtered zinc oxide: film structure and etching behavior10.1016/S0040-6090(03)00949-0 ↗
20. Structural, electrical and optical properties of aluminum doped zinc oxide films prepared by radio frequency magnetron sputtering10.1063/1.365556 ↗
21. Chemical bath deposition of ultraviolet luminescent indium tin hydroxide film: a new synthetic route to transparent ITO film10.1002/adfm.200800181 ↗
22. Stress-dependent band gap shift and quenching of defects in Al-doped ZnO films10.1088/0022-3727/43/46/465402 ↗
23. Preparation of Transparent Conductive Azo Thin Films for Solar Cells
24. Optical and electrical characteristics of Al-doped ZnO thin films prepared by aqueous phase deposition10.1016/j.apsusc.2010.08.064 ↗
25. Effects of doping concentration and annealing temperature on properties of highly-oriented Al-doped ZnO films10.1016/j.jcrysgro.2005.10.047 ↗
26. Effects of thickness and annealing on the properties of Ti-doped ZnO films by radio frequency magnetron sputtering10.1016/j.cap.2010.11.110 ↗
27. Effects of post-annealing on structural, optical and electrical properties of Al-doped ZnO thin films10.1016/j.apsusc.2010.12.144 ↗
28. High quality ITO thin films grown by DC and RF sputtering without oxygen10.1088/0022-3727/43/5/055402 ↗
29. Comparative study of ITO layers deposited by DC and RF magnetron sputtering at room temperature10.1016/j.jnoncrysol.2005.11.088 ↗
30. Obtaining a higher Voc in HIT cells10.1002/pip.646 ↗
31. Properties of n-type polycrystalline silicon solar cells formed by aluminium induced crystallization and CVD thickening10.1016/j.solmat.2010.06.031 ↗
32. Boron-doped a-Si:H/c-Si interface passivation: degradation mechanism10.1063/1.2783972 ↗