journal article·2017-11

Bi 2 Te 3 based bulks with high figure of merit obtained from cut waste fragments of cooling crystal rods

Qiusheng Xiang, Xi'an Fan, Xuewu Han, Chengcheng Zhang, Jie Hu, Bo Feng, Chengpeng Jiang, Guangqiang Li, Yawei Li, Zhu He

Publisher page

Abstract

Abstract Bi2Te3 based cutting waste fragments were recycled by vacuum metallurgical technology to prepare p-type Bi2Te3 based thermoelectric materials. Through washing, vacuum metallurgical, component adjustment, second smelting and resistance pressing sintering (RPS) process, Bi0.4Sb1.6Te3 bulks were successfully obtained. All evidences confirmed that most of impurities from line cutting process such as Sb2O3 could be removed by washing, vacuum metallurgical process used in this work, and the recycling yield is up to 98%. The carrier content and corresponding thermoelectric properties could be adjusted effectively by appropriate component adjustment treatment. At lastly, a Bi0.4Sb1.6Te3 bulk was obtained and its' dimensionless figure of merit (ZT) could reach 1.07 at 379 K and the average ZT value was over 1.0 from 299 K to 419 K. Compared with the traditional process of recycling the single elemental Bi, Sb, Te by wet chemical metallurgical method, the vacuum metallurgical recycling technology introduced here is accordance with the principles of 3-R (reduce, reuse and recycle), and characterized by low cost, low degree of difficulty, low emission, high environmental protection and high efficiency, and the purified ingots can be directly used as raw material for the production of high-performance thermoelectric materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal Radiation and Cooling Technologies · Thermal properties of materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Carbon functionalized TiO2 nanofibers for high efficiency photocatalysis10.1088/2053-1591/1/1/015012 ↗
2. Facile fabrication and photocatalytic application of Ag nanoparticles-TiO2 nanofiber composites10.1166/jnn.2011.3805 ↗
3. Hybrid nanostructures based on titanium dioxide for enhanced photocatalysis10.1016/j.apcata.2014.10.001 ↗
4. Exploring Graphene Quantum Dots/TiO2 interface in photoelectrochemical reactions: solar to fuel conversion10.1016/j.electacta.2015.11.048 ↗
5. A new one-step synthesis method for coating multi-walled carbon nanotubes with cuprous oxide nanoparticles10.1016/j.scriptamat.2008.01.047 ↗
6. ge-enriched graphene quantum dots for enhanced photo-luminescence and supercapacitance10.1039/C4NR02365J ↗
7. Cooling, heating, generating power, and recovering waste heat with thermoelectric systems10.1126/science.1158899 ↗
8. A review on the enhancement of figure of merit from bulk to nano-thermoelectric materials10.1016/j.nanoen.2012.10.005 ↗
9. Smaller is cooler10.1126/science.1069895 ↗
10. Enhancement of thermoelectric figure-of-merit by a bulk nanostructuring approach10.1002/adfm.200901512 ↗
11. Effect of process parameters of microwave activated hot pressing on the microstructure and thermoelectric properties of Bi2Te3-based alloys10.1016/j.jallcom.2015.01.075 ↗
12. Ma · 2014
13. United States Geological Survey (USGS) · 2008
14. United Nations Environment Programme (UNEP) · 1989
15. Resistance pressing sintering: a simple, economical and practical technique and its application to p-type (Bi, Sb)2Te3 thermoelectric materials10.1016/j.jallcom.2014.04.032 ↗
16. Improved thermoelectric properties of Bi2Te3−xSex alloys by melt spinning and resistance pressing sintering10.1088/0022-3727/47/11/115101 ↗
17. Synthesis of Bi0.5Sb1.5Te3 thermoelectric powder using an oxide-reduction process10.1007/s11664-013-2846-y ↗
18. Evolution of thermoelectric performance for (Bi, Sb)2Te3 alloys from cutting waste powders to bulks with high figure of merit10.1016/j.jssc.2015.10.030 ↗
19. Research on preparation of nanometer antimony trioxide from slag containing antimony by vacuum evaporation method10.1016/j.vacuum.2006.01.010 ↗
20. Speight · 2014
21. Enhanced thermoelectric performance in p-type BiSbTe bulk alloy with nanoinclusion of ZnAlO
22. p-type Bi0.4Sb1.6Te3 nanocomposites with enhanced figure of merit10.1063/1.3427427 ↗
23. Thermoelectric properties of p-type (Bi2Te3)x(Sb2Te3)1-x crystals prepared via zone melting10.1016/j.jcrysgro.2004.12.144 ↗
24. Enhanced thermoelectric properties obtained by compositional optimization in p-type BixSb2− xTe3, fabricated by mechanical alloying and spark plasma sintering10.1007/s11664-010-1463-2 ↗
25. Lattice thermal conductivity reduction due to, in situ -generated nano-phase in Bi0.4Sb1.6Te3, alloys by microwave-activated hot pressing10.1007/s11664-014-3339-3 ↗
26. Characterization and thermoelectric properties of Bi0.4Sb1.6Te3, nanostructured bulk prepared by mechanical alloying and microwave activated hot pressing10.1016/j.ceramint.2015.01.130 ↗
27. Enhanced thermoelectric figure-of-merit in p-type nanostructured bismuth antimony tellurium alloys made from elemental chunk10.1021/nl8009928 ↗
28. Thermoelectric transport properties of bismuth telluride bulk materials fabricated by ball milling and spark plasma sintering10.1016/j.jallcom.2010.02.171 ↗