journal article·2002-01

The high strain-rate fracture behaviors of gray iron under compressive loading

Cheng-Hsun Hsu, Shen-Chih Lee, Lili Wang, Xinlog Dong

Materials Chemistry and Physics· Volume 73· Issue 2-3
Publisher page

Abstract

Abstract This research studied the high strain-rate fracture behavior of a brittle metallic material under compressive loading. Gray cast iron was chosen as an ideal metal for such purpose. Split Hopkinson pressure bar test was used as experimental method for testing the specimens at the high strain-rate of 762–2526 S −1 . Static compression test was performed at a slow rate of 2.4×10 −4 S −1 for comparison purpose. The results indicated that the brittle metallic material does not clearly exhibit strain-rate sensitivity behavior, i.e. the difference between static and dynamic compression energy absorbed values tested at various strain-rates was insignificant. However, the fracture mechanisms were somewhat different. At slow rate, the fracture of gray iron was resulted from the crack propagating gradually and branching together along longitudinal directions of flake graphites. At high rate, it instantaneously appeared that large numbers of microvoids/cracks occurred and coalesced at the sites of flake graphites leading to the final fracture. Metallography and scanning electron microscopy (SEM) were performed to correlate the properties attained to the microstructural features.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Electromagnetic Launch and Propulsion Technology · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. C.F. Walton, Gray and Ductile Iron Castings Handbook, Iron Founders’ Society Inc., Cleveland, 1973, pp. 193–194.
2. R.A. Flinn, P.K. Trojan, Engineering Materials and their Application, Houghton Mifflin, Boston, MA, 1990, p. 440.
3. C.F. Walton, Iron Castings Handbook, Iron Castings Society Inc., Cleveland, 1981, p. 205.
4. R. Elliott, Cast Iron Technology, Butterworth, London, 1988, p. 7.
5. J.A. Jacobs, T.F. Kilduff, Engineering Materials Technology, Prentice-Hall, London, 1994, p. 229.
6. J. Datsko, Material Properties and Manufacturing Processes, Joseph Datsko Consultants, Ann Arbor, MI, USA, 1966, p. 321.
7. Follansbee · J. Eng. Mater. Technol. · 1983 · 105 · 6110.1115/1.3225620 ↗
8. Davison · Phys. Rep. · 1979 · 55 · 25510.1016/0370-1573(79)90026-7 ↗
9. Lindholm · J. Mech. Phys. Solids · 1964 · 12 · 31710.1016/0022-5096(64)90028-6 ↗
10. ASM, Metals Handbook, 9th Edition, Vol. 8, 1986, pp. 187–214.
11. R.F. Bunshah, Measurement of Mechanical Properties, Vol. 5, Wiley, New York, 1989, p. 230.
12. L.L. Wang, A. Kobayashi, Research and Application in Dynamic Deformation and Fracture of Solids, Hefei, China, 1998, p. 138.
13. N.E. Dowling, Mechanical Behavior of Materials, Prentice-Hall, London, 1993, p. 154.
14. J.A. Gollins, Failure of Materials in Mechanical Design, Wiley, New York, 1981, pp. 98–100.