journal article·2003-12

Deep-hole carburization in a vacuum furnace by forced-convection gas flow method

Fan-Shiong Chen, Lee-Der Liu

Materials Chemistry and Physics· Volume 82· Issue 3
Publisher page

Abstract

Abstract Carburization in the deep hole with high aspect ratio is a great challenge for the metallurgist. In this paper, the deep-hole carburization of JIS SCM415 as well as SNCM 220 steel with an aspect ratio of beyond 30 has been developed in a two-chamber vacuum furnace under low-pressure acetylene atmosphere by virtue from the forced-convection gas flow carburizing method. The proposed experiment was performed at 950–1050 °C for 15 or 30 min to evaluate the specimens on the uniformity of the carburized layers for the inner surface of the holes through the hardness distribution profiles and the effective case depth (ECD) of the hardened layers. Additionally, the exterior ECD of the specimens was also determined for comparison. With the experimental results, it is shown that a uniform carburized layer was formed in the surface of the deep hole. Furthermore, the diffusion coefficient of carbon atoms was then determined through this study. This paper surely contributes the approach to carburize the deep hole with high degree of uniformity regardless of the aspect ratio.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. ASM Metals Handbook, vol. 4, Heat Treating, ASM International, 1991, p. 348.
2. Vacuum carburizing using acetylene gas
3. Acetylene low-pressure carburizing—a novel and superior carburizing technology
4. G. Parrish, G.S. Harper, Production Gas Carburizing, Pergamon Press, Oxford, 1985, p. 109.10.1016/B978-0-08-027312-9.50004-3 ↗
5. On the relative contribution of acetylene and aromatics to soot particle surface growth10.1016/S0010-2180(97)81776-2 ↗
6. M. Necati Özisik, Heat Transfer: A Basic Approach, McGraw-Hill, New York, 1985, p. 716.
7. An overview of the excess carburizing process
8. An overview of advances in atmosphere and vacuum heat treatment
9. Vacuum carburizing, heat treatment
10. K.-E. Thelning, Steel and its Heat Treatment, 2nd ed., Butterworths, London, 1984, p. 26.
11. L.E. Samuels, Light Microscopy of Carbon Steels, ASM International, 1999, p. 404.10.31399/asm.tb.lmcs.9781627082914 ↗
12. ASM Metals Handbook, vol. 4, Heat Treating, ASM International, 1991, p. 279.
13. D.R. Askeland, The Science and Engineering of Materials, 3rd ed., PWS Publishing Company, Boston, 1994, p. 113.
14. K. Evanson, G. Krauss, D. Medlin, Fatigue behavior of vacuum carburized AISI 8620 steel, in: Proceedings of the Second International Conference on Carburizing and Nitriding, Ohio, ASM Inc., 1995, p. 61.
15. D.H. Herring, R.L. Houghton, The influence of process variables on vacuum carburizing, in: Proceedings of the Second International Conference on Carburizing and Nitriding, Ohio, ASM Inc., 1995, p. 103.