journal article·2014-02

In situ functionalisation of mesoporous carbon electrodes with carbon nanotubes for proton exchange membrane fuel-cell application

Leila Samiee, Fatemeh Shoghi, Akram Maghsodi

Materials Chemistry and Physics· Volume 143· Issue 3
Publisher page

Abstract

Abstract In the work presented here, an attempt is made to study the effect of different carbon supports on the mesostructural properties as well as electrochemical behaviour of Pt/carbon supports. In this respect, the functionalised samples have been synthesised by using CMK-3, nickelocene as nickel source and the chemical vapour deposition (CVD) process for growth of carbon nanotubes. The platinum catalysts (Pt 20 wt.%) were obtained through a conventional wet impregnation method. All the materials have been characterised by XRD (small- and high-) angle, N 2 adsorption–desorption isotherms, high-resolution transmission electron microscopy and high-resolution field emission scanning electron microscopy. The results showed that the mesostructural structure had been partially destroyed by functionalisation of CMK-3 with NiO and multiwalled carbon nanotubes (MWCNTs). Moreover, wide-angle X-ray diffraction (WAXRD) studies revealed the formation of smaller platinum crystallite sizes compared to Vulcan-supported samples. Furthermore, electrochemical evaluation indicates that CMK-3–CNT–20Pt gives a specific surface area of 58.9 m 2 g −1 . Finally, the polarisation curves for the fabricated membrane electrode assemblies (MEAs) with Pt loading of 0.5 mg cm −2 demonstrated that the CMK-3–CNT–20Pt catalyst shows better performance than industrial catalysts and even Vulcan–40% Pt.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrocatalysts for Energy Conversion · Fuel Cells and Related Materials · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Mesoporous carbons as low temperature fuel cell platinum catalyst supports10.1007/s10800-008-9528-0 ↗
2. Materials for fuel-cell technologies10.1038/35104620 ↗
3. Ordered mesoporous carbons (OMC) as supports of electrocatalysts for direct methanol fuel cells (DMFC): effect of carbon precursors of OMC on DMFC performances10.1016/j.electacta.2006.03.092 ↗
4. Ordered porous carbons with tunable pore sizes as catalyst supports in direct methanol fuel cell10.1021/jp0370472 ↗
5. Fabrication and electrocatalytic application of functionalized nanoporous carbon material with different transition metal oxides10.1016/j.apsusc.2012.10.173 ↗
6. Carbon nanotube synthesis using mesoporous silica templates10.1021/nl025558e ↗
7. Exploration of bimetallic Pt–Pd/C nanoparticles as an electrocatalyst for oxygen reduction reaction10.1016/j.apsusc.2011.01.094 ↗
8. Structure and chemical composition of a supported Pt–Ru electrocatalyst for methanol oxidation10.1006/jcat.1995.1151 ↗
9. In-situ X-ray diffraction study of the crystallization kinetics of mesoporous titania films10.1021/jp036442p ↗
10. Crystallite growth kinetics in isothermally annealed sol–gel films10.1016/S0040-6090(05)80010-0 ↗
11. Characterization and microporosity analysis of mesoporous carbon molecular sieves by nitrogen and organics adsorption10.1016/j.cattod.2005.02.028 ↗
12. Two-dimensional hexagonally-ordered mesoporous carbon nitrides with tunable pore diameter, surface area and nitrogen content10.1002/adfm.200700783 ↗
13. Controlling the textural parameters of mesoporous carbon materials10.1016/j.micromeso.2006.10.008 ↗
14. Comparison of high surface Pt/C catalysts by cyclic voltammetry10.1016/S0378-7753(01)00921-1 ↗
15. Graphitic mesoporous carbon as a durable fuel cell catalyst support10.1016/j.jpowsour.2008.06.041 ↗
16. Noncovalently functionalized graphitic mesoporous carbon as a stable support of Pt nanoparticles for oxygen reduction10.1016/j.jpowsour.2009.10.036 ↗
17. Preparation and characterization of ZnO clusters inside mesoporous silica10.1021/cm990740a ↗
18. Preparation and characterization of platinum-based electrocatalysts on multiwalled carbon nanotubes for proton exchange membrane fuel cells10.1021/la0116903 ↗
19. Bard · 1980
20. Nitrogen containing carbon nanotubes as supports for Pt – alternate anodes for fuel cell applications10.1016/j.elecom.2005.07.007 ↗
21. Preparation of multiwall carbon nanotubes-supported high loading platinum for vehicular PEMFC application
22. PEM fuel cell electrocatalysts and catalyst layers: fundamentals and applications
23. Preparation of low-platinum-loading electrocatalysts using electroless deposition method for proton exchange membrane fuel cell systems10.1016/j.electacta.2010.08.084 ↗