Machinability of phosphorous containing sintered steels
Source abstract
Abstract
Abstract Study of the machinability characteristics of porous sintered materials has received far less attention during the last decades, presumably due to powder metallurgy’s greatest advantage over other manufacturing methods in eliminating completely or minimising greatly machining and also perhaps due to lack of any standard test method developed for machinability studies. However, many parts because of intricate design, require machining afterwards. Thus, there is a renewed interest in machinability characteristics of sintered porous materials. Various investigations on machinability studies of sintered ferrous materials have been reviewed in this study. Finally, the effect of some usual additives and microstructural modification on the machinability of sintered and heat-treated steels has been examined. The method used was time taken by a drill of standard dimension before it broke down. Increasing C-content was found to have marginal while usual alloying elements like Cu, Ni, etc. had significant effect on machinability characteristics of sintered steels. It has been concluded that combination of parameters affecting machinability of P/M materials may prove to be beneficial and effective method to control machining characteristics of sintered steels.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. R.S. Jamison, Geijer, Machinability of sintered iron, in: Proceedings of the 15th Annual Meeting of Metal Powder Industries Federation, 1959, pp. 81–93.
2. P.W. Taubenblat, W.E. Smith, F.A. Bladt, Iron–copper–tellurium a new machinable iron-base P/M alloys, in: H.H. Hausner, P.W. Taubenblat (Eds.), Modern Development in Powder Metallurgy, Vol. 10, MPIF/APMI, Pinceton, NJ, 1977, pp. 467–476.
3. P.J. Anderson, J.S. Hirschhorn, Use of additives to improve the machinability of sintered steels, in: H.H. Hausner, P.W. Taubenblat (Eds.), Modern Development in Powder Metallurgy, Vol. 10, MPIF/APMI, Pinceton, NJ, 1977, pp. 477–489.
4. Machinability of sintered steels
5. EMPRE-sulphurized Steel Powder, A.O. Smith-Inland Inc., Milwaukee, WI, 1965.
6. Machinability of powder metallurgy materials
7. A.P. Pignon, Secondary machining operations for P/M products, in: H.H. Hausner, P.W. Taubenblat (Eds.), Modern Development in Powder Metallurgy, Vol. 8, MPIF/APMI, Princeton, NJ, 1973, pp. 163–185.
8. H.O. McIntire, F.W. Boulger, The effect of selenium and tellurium on the machinability of P/M steels, Final Report to the Selenium–Tellurium Development Association, Inc., November 23, 1973.
9. Forging of P/M alloys with improved machinability
10. Energy aspects of iron powder production
11. J.M. Capus, Machinability studies with sintered ferrous alloys, SAE Technical Paper series No. 810246, SAE, Warrendale, PA, 1981.10.4271/810246 ↗
12. J.M. Capus, C. Fournel, The Influence of mix composition on the machinability of sintered iron, Mod. Dev. Powder Metall. Vol. 13, MPIF, Princentass, NJ, (1981).
13. Machinability of sintered steel10.1179/pom.1983.26.3.137 ↗
14. R. Johansson, Different methods to improve machinability of high strength sintered steels, Hoganas Iron Powder Information PM 88-3, S-263 Hoganas, Sweden.
15. K.S. Chopra, International Powder Metallurgy Conference and Exhibition, June 5–10, 1981, Orlando, FL, Sulphide in Machining Grade Ferrous P/M Alloys, 1988.
16. Drilled hole quality assessment in ferrous P/M components using surface integrity techniques10.1179/pom.1988.31.2.117 ↗
17. The machinability of sintered steels
18. O. Anderson, A machinability enhancing additive for high strength materials, Paper presented at 1993 P/M World Congress at Kyoto, July 1993, Hoganas Iron Powder Information P/M 93-6.
19. Machining, ASM Metals Handbook, Desk Edition, ASM, Metals Park, OH, 1985, pp. 27.09–27.10.
20. D.S. Madan, The importance of machinability in processing P/M parts, in: 1995 International Conference on P/M and Particulate Materials, May 14–17, Seattle, WA.
21. M. Arif Siddiqui, Effect of compaction pressure on green and sintered properties of ferrous alloys and their carburizing behaviour, Ph.D. Thesis, AMU, India, 1986.
22. Metal cutting and tribology of seizure
23. A. Thetin, Verschleissmechanismen und Leistungen von Zerspanwerk-zeugen, VDI, Berichte No. 762, 1989, pp. 111–126.