Effects of heat treatment on various properties of organic–inorganic hybrid silica derived from phenyltriethoxysilane
Source abstract
Abstract
Abstract Microparticles of organic–inorganic hybrid silica derived from a tri-functional ethoxysilane (phenyltriethoxysilane (PTES)) still have non-negligible amount of silanol (Si–OH) moiety after it is solidified in its outside appearance. Those residual silanol moiety formed in the Stober process resumes further polycondensation in a heat treatment at temperatures above 250 °C. The rate of the polycondensation reaction of the residual moiety is dominantly influenced by the temperature at which the heat treatment was carried out. Heating at 300 °C for 192 h completes the polycondensation and entirely eliminates the residual silanol groups. The completion of polycondensation of the residual silanol is detected by visually observable insolubility of the heat-treated powder in acetone. The elimination of the silanol moiety due to the completion of the polycondensation is shown by the complete absence of the infrared absorbance corresponding to hydroxyl groups at approximately 950 cm −1 . The completion of the polycondensation leads to densification of the siliceous polymeric network as indicated by the prevention of amphiphilic organic solvent (e. g., N , N -dimethylformamide) from permeating into the bulk matrix of the organic–inorganic hybrid silica. The thermogravimetric measurement shows that phenyl groups directly bonded to Si remains intact at the temperature region (≈300 °C) wherein the polycondensation reaction of the residual silanol groups is strongly promoted.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicone and Siloxane Chemistry · Mesoporous Materials and Catalysis · Aerogels and thermal insulation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Optical properties of functional hybrid organic–inorganic nanocomposites10.1002/adma.200300389 ↗
2. Brinker · 1990
3. Polyhedral oligosilsesquioxanes and their homo derivatives10.1007/3-540-11345-2_12 ↗
4. Silsesquioxanes10.1021/cr00037a012 ↗
5. Substituent effects on the sol–gel chemistry of organotrialkoxysilanes10.1021/cm000451i ↗
6. Preparation of glass fibers of the ZrO2–SiO2 and Na2O–ZrO2–SiO2 systems from metal alkoxides and their resistance to alkaline solution10.1007/BF00550596 ↗
7. The sol–gel process10.1021/cr00099a003 ↗
8. Sol–gel derived antireflective coatings for silicon10.1016/0165-1633(81)90027-7 ↗
9. Photoelectrochemical properties of TiO2 films prepared by the sol–gel process10.2109/jcersj1950.95.1098_150 ↗
10. Strength of gel-derived silicon dioxide fibers10.1557/PROC-32-53 ↗
11. Thermal analysis of organically modified siloxane melting gels10.1007/s10973-011-2024-5 ↗
12. Recent trends in analytical applications of organically modified silicate materials10.1016/S0165-9936(01)00125-X ↗
13. The surface chemistry of amorphous silica, Zhuravlev model10.1016/S0927-7757(00)00556-2 ↗
14. Iler · 1979
15. Viscoelastic and structural properties of the phenyl-modified polysiloxane system with a three-dimensional structure10.1021/jp0573543 ↗
16. Effects of organic groups on structure and viscoelastic properties of organic–inorganic polysiloxane10.1021/jp064252j ↗
17. Effect of metal alkoxide complexes on condensation reactions of hydrolysed phenyltriethoxysilane10.1023/A:1025637103740 ↗
18. Phenyl-substituted siloxane hybrid gels that soften below 140 °C10.1111/j.1551-2916.2008.02841.x ↗
19. Preparation of transparent thick films by electrophoretic sol–gel deposition using phenyltriethoxysilane derived particles10.1111/j.1151-2916.1998.tb02653.x ↗
20. Tomiyasu · 2005 · 54 · 1804
21. Preparation and properties of polybenzoxazole–silica nanocomposites via sol–gel process10.1016/j.eurpolymj.2006.11.013 ↗
22. Controlled growth of monodisperse silica spheres in the micron size range10.1016/0021-9797(68)90272-5 ↗
23. Determination of heat treatment temperature for completing polycondensation of vinyl substituted silica particles prepared by sol–gel method10.1002/ceat.201200368 ↗
24. Pore size control and gas permeation kinetics of silica membranes by pyrolysis of phenyl-substituted ethoxysilanes with cross-flow through a porous support wall10.1016/S0376-7388(97)00002-1 ↗
25. Evaluation of activation energy of viscous flow of sol–gel derived phenyl-modified silica glass10.1016/j.jnoncrysol.2006.05.020 ↗
26. Fabrication of microporous amorphous silica glass by pyrolysis of phenyl groups intercalated in sol–gel derived phenyl-modified silica glass10.1016/j.jnoncrysol.2010.06.010 ↗
27. Thermosoftening of phenyl siloxane glasses prepared via sol concentration10.1016/j.jnoncrysol.2007.06.044 ↗