Making of iron(III) tanning salts from a waste of the titanium recovery by the sulphate process
Source abstract
Abstract
The making of iron(III) tanning salts from iron(II) sulphate heptahydrate, sulphuric acid and potassium acid tartrate (cream of tartar) was studied. The iron(II) sulphate heptahydrate was obtained from the titanium recovery by the sulphate process. The manufacture started with the thermal oxidation of the iron(II). Then, iron(III) soluble complexes were formed with the addition of sulphuric acid and cream of tartar. The tanning salts were obtained in form of fine particles by spray drying. The stability (texture and chemical composition) of the tanning salts so prepared was evaluated by physicochemical parameters. Whereas, the tanning capacity of these salts was determined from the tannage of goat skins. The analysis of the wet brown leathers elaborated was carried out by means of the hydrothermal shrinkage temperature. The prepared salts had an acceptable tanning capacity but its stability was unsuitable. To improve this fact, the formation of the iron(III) soluble complex into the reactor where the tannage occurs was performed. The new methodology was easy to be made and with this alternative it was possible to avoid the troubles produced in the tanning salts obtained in the form of fine particles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Pigment Synthesis and Properties · Catalysis and Hydrodesulfurization Studies · Collagen: Extraction and Characterization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. E. Heidemann, Fundamentals of Leather Manufacture, Eduard Roether KG, Darmstadt, 1993.
2. Rutland · J. Am. Leather Chem. Assoc. · 1991 · 86 · 364
3. K.J. Bienkiewicz, Physical Chemistry of Leather Making, Krieger Publishing Co., Florida, 1983.
4. Alexander · J. Soc. Leather Technol. Chem. · 1992 · 76 · 17
5. Prasad · J. Am. Leather Chem. Assoc. · 1991 · 86 · 87
6. J. Harte, C. Holdren, R. Schneider, C. Shirley, Guı́a de las Sustancias Contaminantes, Editorial Grijalbo, México, 1995.
7. Langlais · J. Am. Leather Chem. Assoc. · 1991 · 86 · 413
8. Committee on Biologic Effects of Atmospheric Pollutants, Chromium, National Academy of Sciences, Washington, DC, 1974.
9. Milačič · Environ. Sci. Technol. · 1995 · 29 · 50610.1021/es00002a029 ↗
10. D. Rai, L.E. Eary, Proceedings of the Chromium Symposium 1986, Industrial Health Foundation, Pittsburgh, PA, 1986, p. 331.
11. Schmid · Das Leder · 1984 · 35 · 165
12. Barlett · J. Environ. Qual. · 1979 · 8 · 3110.2134/jeq1979.00472425000800010008x ↗
13. Gaidau · J. Soc. Leather Technol. Chem. · 1998 · 82 · 143
14. Balasubramanian · J. Am. Leather Chem. Assoc. · 1997 · 92 · 218
15. Tavani · J. Soc. Leather Technol. Chem. · 1994 · 78 · 50
16. U. Sammarco, Proceedings of the XXII Congress of the International Union of Leather Technologists and Chemists Societies, Porto Alegre, Brazil, 1993, p. 468.
17. F.A. Cotton, G. Wilkinson, Quı́mica Inorgánica Avanzada, Editorial Limusa, México, 1997.10.1016/S0020-1693(97)05470-4 ↗
18. A.E. Martell, Stability Constants of Metal-ion Complexes, Part II: Organic Including Macromolecule Ligands, Supplement No. 1, Special Publication No. 25, The Chemical Society, London, 1971.
19. I.M. Kolthoff, P.J. Elving, Treatise on Analytical Chemistry, Part II, Vol. 2, Interscience, New York, 1962.
20. B. Elvers, S. Hawking, G. Schulz (Eds.), Ullmann’s Encyclopaedia of Industrial Chemistry, Vol. A20, VCH, Weinheim, Federal Republic of Germany, 1992, p. 272.
21. Pelovski · Thermochim. Acta · 1996 · 274 · 27310.1016/0040-6031(95)02408-5 ↗
22. Holmes · J. Soc. Leather Technol. Chem. · 1996 · 80 · 133
23. Ying · J. Am. Leather Chem. Assoc. · 1990 · 85 · 78
24. E. Heidemann, Proceedings of the XXII Congress of the International Union of Leather Technologists and Chemists Societies, Porto Alegre, Brazil, 1993, p. 230.
25. A.D. Covington, K.T.W. Alexander, Proceedings of the XXII Congress of the International Union of Leather Technologists and Chemists Societies, Porto Alegre, Brazil, 1993, p. 111.
26. United Nations Industrial Development Organization (UNIDO), Acceptable quality standards in the leather and footwear industry UNIDO Publication, Vienna, 1996.