journal article·2001-01

A mechanistic approach of the sintering of nuclear fuel ceramics

J. Léchelle, R. Boyer, M. Trotabas

Materials Chemistry and Physics· Volume 67· Issue 1-3
Publisher page

Abstract

Abstract The CEA and the COGEMA, as part of their effort to model the different stages of the MOX fuel fabrication process, have specifically worked, on the sintering stage. A physical mechanistic model of MOX fuel sintering is proposed, as well as the numerical schemes that will lead to the achievement of the corresponding software tool. The model takes into account surface diffusion, grain boundary diffusion, volume diffusion, exchanges between solid and gas, as well as the mechanical strains of grains. The scale at which concentrations and strains are taken into account is smaller than grain size (0.1 μm for green pellets and 10 μm for sintered ones). The numerical resolution schemes of this problem have been conceived, and are also presented. They mainly consist of relaxation procedures to uncouple partial derivative mass conservation equations, flux balances along interfaces, non-linear potential equality conditions at interfaces, and Navier–Lame equations over each grain. A code (SALAMMBO) is under construction, based on the latter; once validated by experimental and parametric tests, this code will describe Pu distribution, grain and pore size distribution, and local density of the pellets as functions of the sintering conditions, thus enabling further developments of the fabrication process such as the obtention of advanced microstructures of improved MOX fuels.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · Nuclear reactor physics and engineering · Fusion materials and technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. J. Léchelle, M. Trotabas, in: Proceedings of the IAEA Technical Committee on Advanced Methods of Process/Quality Control in Nuclear Reactor Fuel Manufacture, Lingen, October 18–22, 1999, IAEA-TECDOC-1166, 65–78.
2. J.M. Chaix, Simulation numérique d’empilements aléatoires d’amas de particules, Colloque National de Métallurgie des Poudres, SF2M, Grenoble, avril 6–8, 1998.
3. G. Kerboul, Etude de l’endommagement des produits céramiques crus par émission acoustique, 92 ISAL 103, Thèse INSA Lyon, 1992.
4. Mechanics of powder pressing. II. Finite element analysis of end-capping in pressed green powder
5. R. Defay, I. Prigogine, Tension Superficielle et Adsorption, Dunod, Paris, 1951.
6. D. Royer, E. Dieulesaint, Ondes Élastiques Dans les Solides, Tome 1, Propagation Libre et Guidée, Masson, Paris, 1996.
7. L. Landau, E. Lifchitz, Theory of Elasticity, Addison-Wesley Physics Books, Pergamon Press, London, 1969.
8. D.R. Olander, Fundamental Aspects of Nuclear Reactor Fuel Elements, Department of Nuclear Engineering, University of California, Berkeley, CA, 1976.10.2172/7343826 ↗
9. M. Rappaz, M. Bellet, M. Deville, Traité des Matériaux, Vol. 10, Modélisation Numérique en Science et Génie des Matériaux, Presses Polytechniques et Universitaires Romandes, 1998.
10. D. Bernache-Assolant, Chimie–Physique du Frittage, Hermès, Forceram Formation Céramique, 1993.
11. L.M. Atlas, G.J. Schlehman, Defect equilibria of PuO2−x, 1100 to 1600°C, in: Thermodynamics, Vol. II, Proceedings of the Symposium on Thermodynamics with Emphasis on Nuclear Materials and Atomic Transport in Solids originated by the IAEA in Co-operation with the Commission on Thermodynamics and the Thermochemistry of the International Union of Pure and Applied Chemistry, Vienna, July 22–27, 1965, IAEA, Vienna, 1966.
12. Hydrogen dissolution in and release from non-metals. I. Uranium dioxide10.1016/0022-3115(89)90227-4 ↗
13. Location of krypton atoms in uranium dioxide10.1016/S0022-3115(99)00127-0 ↗
14. J.S. Kirkaldy, D.J. Young, Diffusion in the condensed state, The Institute of Metals, 1987.
15. J.O. Hirschfelder, C.F. Curtis, R.B. Bird, Molecular Theory of Gases and Liquids, 2nd Edition, Wiley, New York, 1965.
16. L. Monchick, E.A. Mason, Transport properties of polar gases, J. Chem. Phys. 35 (5) (1961).10.1063/1.1732130 ↗
17. Corresponding states for the viscosity of noble gases up to high densities10.1016/0031-8914(65)90136-9 ↗
18. P. Buisson, Rôle de la distribution des compositions cationiques sur l’aptitude à la dissolution des combustibles MOX, Caractérisation de la distribution par diffraction des rayons X sur poudres, Thèse de l’Université Joseph Fourier, Grenoble I, 1999.
19. Thermal expansion of solid UO2 and (UPu) mixed oxides10.1016/0022-3115(88)90315-7 ↗
20. Surface energy measurements on UO2 — a critical review10.1016/0022-3115(87)90017-1 ↗
21. H.P. Lantgangen, Computational partial differential equations, numerical methods and DIFFPACK programming, Lectures Notes in Computational Science and Engineering, Vol. 2, Springer, Berlin, 1999.
22. An advancing front 2D/3D-mesh generator based on abstract rules10.1007/s007910050004 ↗
23. L.D. Marini, A. Quarteroni, A relaxation procedure for domain decomposition methods using finite elements, in: Proceedings of the First International Conference on Domain Decomposition Methods for Partial Differential Equations, SIAM, Philadelphia, PA, 1988, pp. 129–143.