journal article·2014-12

Effect of wet jet milling of carbon nanotube on electrical properties of polymer nanocomposites

Yusuke Imai, Daisuke Shimamoto, Yuji Hotta

Materials Chemistry and Physics· Volume 148· Issue 3
Publisher page

Abstract

Abstract Wet-type jet milling (WJM) was used as a pre-treatment procedure for carbon nanotube (CNT) which was utilized as electrical conductive filler for polymer nanocomposites. Nanocomposites were prepared by dispersing WJM treated CNT (WJM-CNT) or as-received CNT (AR-CNT) in isotactic polypropylene matrix, and the effect of WJM pre-treatment on nanocomposite properties was investigated. Dispersion structure of CNT was observed by SEM and electrical property was studied by impedance spectroscopy. DC conductivities ( σ DC ) showed different CNT concentration dependences, which were characterized by the percolation critical exponents. At 0.5 wt% of CNT, σ DC increased two-fold by using WJM-CNT. Analysis of imaginary part of impedance spectra and complex dielectric permittivity suggested the WJM-CNT nanocomposites had much complicated local structure as compared to the AR-CNT counterparts. These electrical properties were discussed in relation to the dispersion structure of CNT.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Carbon Nanotubes in Composites · Smart Materials for Construction · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Terrones · Annu. Rev. Mater. Res. · 2003 · 33 · 41910.1146/annurev.matsci.33.012802.100255 ↗
2. Thostensen · Compos. Sci. Technol. · 2005 · 65 · 49110.1016/j.compscitech.2004.11.003 ↗
3. Bauhofer · Compos. Sci. Technol. · 2009 · 69 · 148610.1016/j.compscitech.2008.06.018 ↗
4. Spitalsky · Prog. Polym. Sci. · 2010 · 35 · 35710.1016/j.progpolymsci.2009.09.003 ↗
5. Bekyarova · Langmuir · 2007 · 23 · 397010.1021/la062743p ↗
6. Mathur · Compos. Sci. Technol. · 2008 · 68 · 160810.1016/j.compscitech.2008.02.020 ↗
7. Stauffer · 1994
8. Dai · Science · 1996 · 272 · 52310.1126/science.272.5261.523 ↗
9. Watts · Nano Lett. · 2003 · 3 · 54910.1021/nl034028v ↗
10. Kezuka · Synth. Met. · 1995 · 71 · 159710.1016/0379-6779(94)02967-4 ↗
11. Omura · J. Am. Ceram. Soc. · 2006 · 89 · 273810.1111/j.1551-2916.2006.01142.x ↗
12. Hotta · J. Am. Ceram. Soc. · 2008 · 91 · 109510.1111/j.1551-2916.2008.02310.x ↗
13. Hotta · J. Am. Ceram. Soc. · 2009 · 92 · 119810.1111/j.1551-2916.2009.03054.x ↗
14. Sekitani · Nat. Mater. · 2009 · 8 · 49410.1038/nmat2459 ↗
15. Ata · Nano Lett. · 2012 · 12 · 271010.1021/nl204221y ↗
16. Kobashi · Chem. Sci. · 2013 · 4 · 72710.1039/C2SC21266H ↗
17. Yoon · Sci. Rep. · 2014
18. Hata · Science · 2004 · 306 · 136210.1126/science.1104962 ↗
19. Futaba · J. Phys. Chem. B · 2006 · 110 · 803510.1021/jp060080e ↗
20. Barrau · Macromolecules · 2003 · 36 · 518710.1021/ma021263b ↗
21. Dyre · Rev. Mod. Phys. · 2000 · 72 · 87310.1103/RevModPhys.72.873 ↗
22. Balberg · Phys. Rev. B · 1985 · 31 · 829510.1103/PhysRevB.31.8295 ↗
23. Balberg · Phys. Rev. Lett. · 1987 · 59 · 130510.1103/PhysRevLett.59.1305 ↗
24. Balberg · Phys. Rev. B · 1998 · 57 · 1335110.1103/PhysRevB.57.13351 ↗
25. Maclachlan · J. Polym. Sci. Part B Polym. Phys. · 2003 · 43 · 327310.1002/polb.20597 ↗
26. Imai · Soft Matter · 2012 · 8 · 628010.1039/c2sm06740d ↗
27. Garrett · Appl. Phys. Lett. · 2010 · 97 · 16310510.1063/1.3490650 ↗
28. Barsoukov · 2005
29. Calame · J. Appl. Phys. · 2003 · 94 · 594510.1063/1.1615302 ↗
30. Havriliak · Polymer · 1967 · 8 · 16110.1016/0032-3861(67)90021-3 ↗