Environmentally assisted cracking behavior of single and dual phase stainless steels in hot chloride solutions
Source abstract
Abstract
Abstract The environmentally assisted cracking (EAC) behavior of AISI 316L austenitic stainless steel (SS), AISI 430 ferritic stainless steel and 22% Cr duplex stainless steel (DSS) in hot chloride solutions were investigated. Slow strain rate testing (SSRT) technique was employed to evaluate the susceptibility to EAC in 3.5 wt.% NaCl solution at 80 °C and in 40 wt.% CaCl 2 solution at 100 °C. The experimental results showed that the resistances to localized corrosion and EAC were strongly dependent on the microstructure, chemical composition and the nature of the environment involved. 430 SS was found less resistant to pitting corrosion and EAC in both chloride solutions. The SSRT results indicated that 316L SS and 22% Cr DSS became susceptible to EAC in hot 40 wt.% CaCl 2 solution. Selective dissolution was found participating in the initiation and growth processes in EAC of 22% Cr DSS. Besides, intergranular cracking was found in 316L austenitic SS while pitting enhanced EAC occurred in 430 ferritic SS in 40 wt.% CaCl 2 solution at 100 °C. The effect of strain rate on the susceptibility to EAC in hot CaCl 2 solution was more pronounced in 316L austenitic SS and 22% Cr DSS than that in 430 ferritic SS.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Nilsson · Mater. Sci. Technol. · 1992 · 8 · 68510.1179/mst.1992.8.8.685 ↗
2. Davison · Mater. Des. · 1991 · 12 · 18710.1016/0261-3069(91)90162-W ↗
3. Sedriks · Corrosion · 1989 · 45 · 51010.5006/1.3582052 ↗
4. B. Larsson, H. Gripenberg, R. Mellstrom, in: G.L. Dunlop (Ed.), Proceedings of the Stainless Steels’84, Chalmers University of Technology, Göteborg, Sweden, 3–4 September 1984, The Institute of Metals, London, UK, 1985, p. 452.
5. S. Bernhardsson, J. Oredsson, C. Mårtenson, in: R.A. Lula (Ed.), Proceedings of the Conference on Duplex Stainless Steels, St. Louis, MO, 25–28 October 1982, ASM, Metals Park, OH, 1984, p. 267.
6. T. Magnin, J. Le Coze, A. Desestret, in: R.A. Lula (Ed.), Proceedings of the Conference on Duplex Stainless Steels, St. Louis, MO, 25–28 October 1982, ASM, Metals Park, OH, 1984, p. 535.
7. S. Bernhardsson, in: J. Charles, S. Bernhardson (Eds.), Proceedings of the Conference on Duplex Stainless Steels’91, vol. I, Beaune, France, 28–30 October 1991, Les Editions de Physique, Les Ulis, France, 1991, p. 185.
8. R.F.A. Jargelius, R. Blom, S. Hertzman, J. Linder, in: J. Charles, S. Bernhardson (Eds.), Proceedings of the Conference on Duplex Stainless Steels’91, vol. I, Beaune, France, 28–30 October 1991, Les Editions de Physique, Les Ulis, France, 1991, p. 211.
9. Kangas · Werkst. Korr. · 1995 · 46 · 35410.1002/maco.19950460603 ↗
10. Chou · Mater. Chem. Phys. · 1999 · 60 · 13710.1016/S0254-0584(99)00077-2 ↗
11. Chou · Mater. Sci. Eng. A · 1999 · 270 · 21910.1016/S0921-5093(99)00174-4 ↗
12. Tsai · Corros. Sci. · 2000 · 42 · 174110.1016/S0010-938X(00)00029-9 ↗
13. Laitinen · Corrosion · 1996 · 52 · 29510.5006/1.3293641 ↗
14. Tsai · Corros. Sci. · 2000 · 42 · 54510.1016/S0010-938X(99)00105-5 ↗
15. Liou · Mater. Chem. Phys. · 2002 · 74 · 3310.1016/S0254-0584(01)00409-6 ↗
16. Liou · Corros. Sci. · 2002 · 44 · 284110.1016/S0010-938X(02)00068-9 ↗
17. Tseng · Metal. Mater. Trans. · 2003 · 34A · 9510.1007/s11661-003-0211-0 ↗
18. Tsai · Corros. Sci. · 1998 · 40 · 28110.1016/S0010-938X(97)00135-2 ↗
19. Chiu · Mater. Sci. Eng. A · 2003 · 354 · 8210.1016/S0921-5093(02)00911-5 ↗
20. Symniotis · Corrosion · 1990 · 46 · 210.5006/1.3585062 ↗
21. W.T. Tsai, K.M. Tsai, C.J. Lin, in: Proceedings of the 58th Annual Conference of NACE (CORROSION/2003), Paper #03398, San Diego, CA, 16–20 March 2003, NACE, Houston, TX, 2003.10.1109/CMPSAC.2003.1245381 ↗
22. J.J. Eckenrod, C.W. Kovach, in: C.R. Brinkman, H.W. Garvin (Eds.), Proceedings of the Conference on Properties of Austenitic Stainless Steels and their Weld Metals, ASTM STP 679, Atlanta, GA, 14 November 1977, ASTM, Philadelphia, PA, 1979, p. 17.10.1520/STP38350S ↗
23. Truman · Br. Corros. J. · 1977 · 12 · 23610.1179/000705977798318973 ↗
24. Newman · Corros. Sci. · 1987 · 27 · 82710.1016/0010-938X(87)90040-0 ↗
25. M.O. Speidel, in: Proceedings of the International Conference on Stainless Steels, Chiba, Japan, 10–13 June 1991, ISIJ, Tokyo, Japan, 1991, p. 25.
26. Tsuge · Corrosion · 1988 · 44 · 30510.5006/1.3583942 ↗
27. F.B. Pickering, in: G.L. Dunlop (Ed.), Proceedings of the Stainless Steels’84, Chalmers University of Technology, Göteborg, Sweden, 3–4 September 1984, The Institute of Metals, London, UK, 1985, p. 12.
28. Pant · Steel Res. · 1987 · 58 · 1810.1002/srin.198701482 ↗