journal article·2014-12

Influence of chromium content on microstructure and grain boundary serration formation in a ternary Ni- x Cr-0.1C model alloy

F.H. Latief, H.U. Hong, T. Blanc, I.S. Kim, B.G. Choi, C.Y. Jo, J.H. Lee

Materials Chemistry and Physics· Volume 148· Issue 3
Publisher page

Abstract

Abstract The influence of chromium content on microstructure and grain boundary serration formation in a ternary Ni-xCr-0.1C model alloy was investigated. First, the cast alloys were hot-compressed and then solution treated to obtain a recrystallized structure. Second, a proprietary heat treatment was employed to all of the compressed alloys to produce the serrated grain boundaries. The recrystallization retardation of the alloys increased with increasing chromium content after the first step. This may be attributed to the change in lattice distortion due to the addition of chromium into the solid solution of the nickel matrix, and it was also affected by Zener drag pressure exerted by the formation of carbides suppressing the grain growth during solution treatment. Furthermore, the grain boundary serrations were found in all of the alloys after the second step. It was determined that the serrated grain boundary was initially formed without carbide formation during slow cooling. The formation of grain boundary serration is thought to be promoted by lattice distortional strain near grain boundaries due to discontinuous chromium segregation. The higher chromium content promoted a substantial increase in the lattice distortion energy, which resulted in a higher amplitude of the serrated grain boundary.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Song · Mater. Sci. Eng. A · 2011 · 528 · 796810.1016/j.msea.2011.07.028 ↗
2. Larson · Metall. Trans. A · 1977 · 8A · 5110.1007/BF02677263 ↗
3. Koul · Metall. Trans. A · 1985 · 16A · 1710.1007/BF02656707 ↗
4. Tanaka · J. Mater. Sci. · 1988 · 23 · 62110.1007/BF01174696 ↗
5. Koul · Acta Metall. · 1983 · 31 · 106110.1016/0001-6160(83)90202-X ↗
6. Formation of serrated grain boundaries and their effect on the mechanical properties in a P/M nickel base superalloy
7. Hong · Philos. Mag. · 2012 · 92 · 280910.1080/14786435.2012.676212 ↗
8. On the mechanism of serrated grain boundary formation in Ni-based superalloys with low γ’ volume fraction
9. Baran · J. Prosthet. Dent. · 1983 · 50 · 63910.1016/0022-3913(83)90201-9 ↗
10. H.U. Hong, I.S. Kim, B.G. Choi, C.Y. Jo, Y.S. Yoo, H.W. Jeong, S.M. Seo, Method of heat treatment of Ni-based superalloy for wave type grain-boundary and NI-based superalloy the same, US Patent Application Serial No. 12/484,597; 2009.
11. Loodgard · Mater. Sci. Eng. A · 2000 · 283 · 14410.1016/S0921-5093(00)00734-6 ↗
12. Nes · Acta Metall. · 1985 · 33 · 1110.1016/0001-6160(85)90214-7 ↗
13. Carter · 1991 · 72
14. Rokhlin · Russ. Metall. · 2011 · 1 · 5510.1134/S0036029511010149 ↗
15. Kurilekh · Met. Sci. Heat Treat. · 1959 · 1 · 3310.1007/BF00813841 ↗
16. Nash · Bullet. Alloys Phase Diagr. · 1986 · 7 · 46610.1007/BF02867812 ↗
17. Zhirnov · Met. Sci. Heat Treat. · 1959 · 1 · 1910.1007/BF00816509 ↗
18. Pollock · J. Propeel. Power · 2006 · 22 · 36110.2514/1.18239 ↗
19. Was · Corros · 1990 · 46 · 31910.5006/1.3585110 ↗
20. Nickel and Nickel Alloys
21. Qin · Mater. Sci. Eng. A · 2008 · 485 · 7410.1016/j.msea.2007.07.055 ↗
22. Zhao · Metall. Mater. Trans. A · 2001 · 32 · 127110.1007/s11661-001-0217-4 ↗
23. Mathew · Mater. Sci. Eng. A · 2004 · 372 · 32710.1016/j.msea.2004.01.042 ↗
24. Angliu · Metall. Trans. A · 1990 · 21 · 209710.1007/BF02647868 ↗
25. Hong · Metall. Mater. Trans. A · 2012 · 43 · 17310.1007/s11661-011-0837-2 ↗
26. Bai · Mater. Sci. Eng. A · 2011 · 528 · 233910.1016/j.msea.2010.11.088 ↗
27. Sahlaoui · Acta Mater. · 2002 · 50 · 138310.1016/S1359-6454(01)00444-X ↗
28. Jiang · Mater. Sci. Eng. A · 2012 · 536 · 3710.1016/j.msea.2011.11.060 ↗
29. McLean · 1957 · 124
30. Winning · Mater. Sci. Eng. A · 2001 · 317 · 1710.1016/S0921-5093(01)01193-5 ↗
31. Hong · Mater. Sci. Eng. A · 2009 · 517 · 12510.1016/j.msea.2009.03.071 ↗